Ki-Tae Park

Dr. Ki-Tae Park

Korea Institute of Construction and Building Technology, Goyang, Gyeonggi, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2017 in Polymers
Verified
Journal Article
Open access
PDF file
YYYoung-Jun You
Young-Jun You
JKJang-Ho Jay Kim
Jang-Ho Jay Kim
KPKi-Tae Park
Ki-Tae Park
DSDong-Woo Seo
Dong-Woo Seo
TLTae-Hee Lee
Tae-Hee Lee
The rule of mixtures (ROM) method is often used to estimate the tensile strength of fiber reinforced polymers (FRPs) reinforcing bars (rebars). Generally, the ROM method predicts the FRP rebars’ modulus of elasticity adequately but overestimates their tensile strength. This may result from defects occurred during manufacture that prevent the used materials from exhibiting a sound performance and the shear-lag phenomenon by transmission of external forces through the surface of the rebar having a circular cross section. Due to the latter, there is a difference in fiber breaking points regarding the fibers located on the surface and fibers located at the center, and thus results in differences between the values calculated from the conventional ROM and the experimental result. In this study, for the purpose of resolving the problem, glass FRP (GFRP) rebars were shaped to have a hollow section at the center of their cross sections and were further subject to tensile strength tests. The test results were further placed under regression analysis and a modified ROM within ±5% accuracy compared to the experimental value was proposed for GFRP rebars with 13, 16, and 19 mm diameters.

1 November 2018 in Asian-Australasian Journal of Animal Sciences
Verified
Journal Article
Open access
PDF file
HKHwan-Ku Kang
Hwan-Ku Kang
SPSeong Bok Park
Seong Bok Park
JJJinJoo Jeon
JinJoo Jeon
HKHYUNSOO KIM
HYUNSOO KIM
KPKi-Tae Park
Ki-Tae Park
CKChan-Ho Kim
Chan-Ho Kim
This experiment was to investigate the effect of increasing levels of apparent metabolizable energy (AMEn) on the laying performance, egg quality, blood parameters, blood biochemistry, intestinal morphology, and apparent total tract digestibility (ATTD) of energy and nutrients in diets fed to laying hens. A total of three-hundred twenty 33-week-old Hy-Line Brown laying hens (Gallus domesticus) were evenly assigned to four experimental diets of 2,750, 2,850, 2,950, and 3,050 kcal AMEn/kg in pens with floors covered with deep litter of rice hulls. There were four replicates of each treatment, each consisting of 20 birds in a pen. AMEn intake was increased (linear, p<0.05) with inclusion level of AMEn in diets increased. Feed intake and feed conversion ratio were improved (linear, p<0.01), but hen-day egg production tended to be increased with an increasing level of AMEn in diets. During the experiment, leukocyte concentration and blood biochemistry (total cholesterol, triglyceride, glucose, total protein, calcium, asparate aminotransferase, and alanine transferase were not influenced by increasing level of AMEn in diets. Gross energy and ether extract were increased (linear, p<0.01) as the inclusion level of AMEn in diets increased. Laying hens fed high AMEn diet (i.e., 3,050 kcal/kg in the current experiment) tended to overconsume energy with a positive effect on feed intake, feed conversion ratio, nutrient digestibility, and intestinal morphology but not on egg production and egg mass.

1 July 2015 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
HSHyun-Seop Shin
Hyun-Seop Shin
KPKi-Tae Park
Ki-Tae Park
CLChin-Hyung Lee
Chin-Hyung Lee
KCkyongho chang
kyongho chang
VDVuong Nguyen Van Do
Vuong Nguyen Van Do
Influence of welding process and welding consumable on the impact toughness at low temperatures of the Heat Affected Zone (HAZ) and the weld metal in a structural steel weldment was investigated. A comparison of the low temperature impact toughness was made between the welded joints fabricated by Shielded Metal Arc Welding (SMAW) and Flux Cored Arc Welding (FCAW) processes, respectively. The Charpy impact tests along with the microstructural observations and the hardness measurements were carried out to derive the effective welding method to guarantee the higher impact toughness of the HAZ and the weld metal at low temperatures. Standard V-notch Charpy impact specimens were prepared and tested under dynamic loading condition. Variation of the Charpy impact energy with respect to the test temperature and that of the hardness across the welds were presented and correlated with the microstructure and the welding process. Analysis of the results unveiled that the weld metal of the FCAW joint has a little higher low temperature impact toughness owing to the higher nickel content, whilst the HAZ of the SMAW joint has much superior impact toughness at low temperatures attributed to the lower heat input; thus the efficient welding method to ensure higher low temperature impact toughness of the HAZ and the weld metal is to employ a low heat input welding process using a welding consumable with high nickel content.

6 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TKTae Ho Kwon
Tae Ho Kwon
JKJaehwan Kim
Jaehwan Kim
KPKi-Tae Park
Ki-Tae Park
KJKyusan Jung
Kyusan Jung
Reinforced concrete slab (RCS) bridges deteriorate because of exposure to environmental factors over time, resulting in reduced durability. Particularly, the carbonation of RCS bridges corrodes the rebars and reduces the strength. However, carbonation models derived from short-term experiments exhibit low reliability with respect to existing bridges. Therefore, a long short-term memory (LSTM)-based methodology was developed in this study for generating carbonation models using existing bridge inspection reports. The proposed methodology trains the LSTM model by combining data extracted from reports and local environmental data. The learning process uses padding and masking methods to consider the history of environmental data. A case study was performed to validate the proposed method in three different regions of Korea. The results verified that the coefficient of determination of the proposed method was higher than those of the existing carbonation models and other regression analyses. Therefore, the developed methodology can be used for predicting regional carbonation models using the data from existing bridges.

13 July 2018 in Sensors
Verified
Journal Article
Open access
PDF file
WNWongi Na
Wongi Na
DSDong-Woo Seo
Dong-Woo Seo
BKByeong-Cheol Kim
Byeong-Cheol Kim
KPKi-Tae Park
Ki-Tae Park
Smart materials such as piezoelectric transducers can be used for monitoring the health of building structures. In this study, a structural health monitoring technique known as the electromechanical impedance (EMI) method is investigated. Although the EMI method has the advantage of using a single piezoelectric patch that acts both as the actuator and as the sensor, there are still many issues to be addressed. To further understand the problem, the performance of the EMI method on a structure subjected to progressive damage at different resonance frequency ranges and peak amplitudes was investigated using three different statistical metrics: root-mean-square deviation (RMSD), mean absolute percentage deviation (MAPD) and correlation coefficient deviation (CCD). Metal plates were used throughout the study. The results acquired could be used to further understand the damage identification performance of the EMI method.

8 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JKJaehwan Kim
Jaehwan Kim
KPKi-Tae Park
Ki-Tae Park
TKTae Ho Kwon
Tae Ho Kwon
To cope with the premature deterioration of reinforced concrete structures caused by chloride-induced corrosion, the corrosion rate is required to be estimated and the transport parameters calculated. The electrochemical impedance spectroscopy (EIS) technique can evaluate steel corrosion behaviors at different frequencies. However, its capacity to interpret the impedance response of the system (steel embedded in concrete) is still challenged. Although concrete is a good barrier used to secure structural performance, one of the main obstacles associated with electrical measurements relates to the cases in which concrete contains unexpected or invisible variables, such as changes in pore structure induced by the continuous hydration process. In addition, the fact that steel embedded in concrete is controlled during experiments is technically challenging. Due to these limitations, various circuits have been proposed to explain the corrosion behavior of steel in concrete. EIS measurements are very sensitive to small perturbations. During the analysis process of EIS data, it is possible to introduce unexpected errors attributed to variables; thus, the estimated corrosion values based on the analysis rate may be misleading. To overcome the limitations, it is necessary to confirm the impedance responses first in controlled variable cases. In this study, EIS measurements were conducted for active/passive states of steel in concrete in various conditions to minimize variable errors which are likely induced by operators.