KIWOONG PARK

Mr. KIWOONG PARK

Kwangwoon University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KPKIWOONG PARK
KIWOONG PARK
ACAnlan Chen
Anlan Chen
KSKota Sakai
Kota Sakai
SHSunbin Hwang
Sunbin Hwang
XHXingyu Huang
Xingyu Huang
MKMasaharu Kobayashi
Masaharu Kobayashi
In this article, we report performance enhancement and reliability improvement of oxide semiconductor FETs (OS FETs) by polycrystalline Ga-doped InOx (poly-IGO). Atomic layer deposition (ALD) and post-deposition annealing (PDA) were employed to achieve crystallization of IGO. A systematic study of bottom-gate (BG) FETs with varied Ga concentrations and film thicknesses identified optimized conditions yielding a mobility up to 81 cm2/V ⋅ s. Low-temperature measurements were conducted to physically understand the mobility improvement. The carrier transport mechanisms were discussed. Then, we developed a novel selective crystallization method in the OS stack for process integration and device operation of gate-all-around (GAA) nanosheet (NS) IGO FETs. The fabricated GAA IGO FETs showed normally-OFF operation, high ON-current of 326 μA/μm, and a steep subthreshold slope of 68 mV/dec. In addition, GAA NS FETs exhibited further improved bias stress stability. This work provides a scalable strategy of poly-OS channels for monolithic 3-D (M3D) integration and 3-D memory such as 3-D DRAM and 3-D NAND.

18 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
KPKIWOONG PARK
KIWOONG PARK
WCWon-Ju Cho
Won-Ju Cho
In this study, we applied microwave annealing (MWA) to fabricate amorphous In-Ga-Zn-O (a-IGZO) thin-film transistors (TFTs) without thermal damage to flexible polyimide (PI) substrates. Microwave energy is highly efficient for selective heating of materials when compared to conventional thermal annealing (CTA). We applied MWA and CTA to a-IGZO TFTs on PI substrate to evaluate the thermal damage to the substrates. While the PI substrate did not suffer thermal damage even at a high power in MWA, it suffered severe damage at high temperatures in CTA. Moreover, a-IGZO TFTs were prepared by MWA at 600 W for 2 min, whereas the same process using CTA required 30 min at a temperature of 300 °C, which is a maximum process condition in CTA without thermal damage to the PI substrate. Hence, MWA TFTs have superior electrical performance when compared to CTA TFTs, because traps/defects are effectively eliminated. Through instability evaluation, it was found that MWA TFTs were more stable than CTA TFTs against gate bias stress at various temperatures. Moreover, an MWA TFT-constructed resistive load inverter exhibited better static and dynamic characteristics than the CTA TFT-constructed one. Therefore, MWA is a promising thermal process with efficient energy conversion that allows the fabrication of high-performance electronic devices.

8 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
KPKIWOONG PARK
KIWOONG PARK
WCWon-Ju Cho
Won-Ju Cho
A random network of indium–gallium–zinc oxide (IGZO) nanowires was fabricated by electrospun-polyvinylpyrrolidone (PVP)-nanofiber template transfer. Conventional electrospun nanofibers have been extensively studied owing to their flexibility and inherently high surface-to-volume ratio. However, solution-based IGZO nanofibers have critical issues such as poor electrical properties, reliability, and uniformity. Furthermore, high-temperature calcination, which is essential for vaporizing the polymer matrix, hinders their applications for flexible electronics. Therefore, sputter-based IGZO nanowires were obtained in this study using electrospun PVP nanofibers as an etching mask to overcome the limitations of conventional electrospun IGZO nanofibers. Field-effect transistors (FETs) were fabricated using two types of channels, that is, the nanofiber template-transferred IGZO nanowires and electrospun IGZO nanofibers. A comparison of the transmittance, adhesion, electrical properties, reliability, and uniformity of these two channels in operation revealed that the nanofiber template-transferred IGZO nanowire FETs demonstrated higher transmittance, stronger substrate adhesion, superior electrical performance, and operational reliability and uniformity compared to the electrospun IGZO nanofiber FETs. The proposed IGZO nanowires fabricated by PVP nanofiber template transfer are expected to be a promising channel structure that overcomes the limitations of conventional electrospun IGZO nanofibers.

18 September 2023 in Biomimetics
Verified
Journal Article
Open access
PDF file
DLDong Hee Lee
Dong Hee Lee
HKHwi-Su Kim
Hwi-Su Kim
KPKIWOONG PARK
KIWOONG PARK
HPHamin Park
Hamin Park
WCWon-Ju Cho
Won-Ju Cho
In this study, we enhance the synaptic behavior of artificial synaptic transistors by utilizing nanowire (NW)-type polysilicon channel structures. The high surface-to-volume ratio of the NW channels enables efficient modulation of the channel conductance, which is interpreted as the synaptic weight. As a result, NW-type synaptic transistors exhibit a larger hysteresis window compared to film-type synaptic transistors, even within the same gate voltage sweeping range. Moreover, NW-type synaptic transistors demonstrate superior short-term facilitation and long-term memory transition compared with film-type ones, as evidenced by the measured paired-pulse facilitation and excitatory post-synaptic current characteristics at varying frequencies and pulse numbers. Additionally, we observed gradual potentiation/depression characteristics, making these artificial synapses applicable to artificial neural networks. Furthermore, the NW-type synaptic transistors exhibit improved Modified National Institute of Standards and Technology pattern recognition rate of 91.2%. In conclusion, NW structure channels are expected to be a promising technology for next-generation artificial intelligence (AI) semiconductors, and the integration of NW structure channels has significant potential to advance AI semiconductor technology.

Verified
Journal Article
Open access
PDF file
KPKIWOONG PARK
KIWOONG PARK
WCWon-Ju Cho
Won-Ju Cho
In this study, we propose tunable pH sensors based on the electric-double-layer transistor (EDLT) with time-dependent sensitivity characteristics. The EDLT is able to modulate the drain current by using the mobile ions inside the electrolytic gate dielectric. This property allows the implementation of a device with sensitivity characteristics that are simply adjusted according to the measurement time. An extended gate-type, ion-sensitive, field-effect transistor consisting of a chitosan/Ta2O5 hybrid dielectric EDLT transducer, and an SnO2 sensing membrane, were fabricated to evaluate the sensing behavior at different buffer pH levels. As a result, we were able to achieve tunable sensitivity by only adjusting the measurement time by using a single EDLT and without additional gate electrodes. In addition, to demonstrate the unique sensing behavior of the time-dependent tunable pH sensors based on organic–inorganic hybrid EDLT, comparative sensors consisting of a normal FET with a SiO2 gate dielectric were prepared. It was found that the proposed pH sensors exhibit repeatable and stable sensing operations with drain current deviations <1%. Therefore, pH sensors using a chitosan electrolytic EDLT are suitable for biosensor platforms, possessing tunable sensitivity and high-reliability characteristics.

3 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
KPKIWOONG PARK
KIWOONG PARK
WCWon-Ju Cho
Won-Ju Cho
We propose an ambipolar chitosan synaptic transistor that effectively responds to binary neuroplasticity. We fabricated the synaptic transistors by applying a chitosan electric double layer (EDL) to the gate insulator of the excimer laser annealed polycrystalline silicon (poly-Si) thin-film transistor (TFT) with Ni-silicide (NiSi) Schottky-barrier source/drain (S/D) junction. The undoped poly-Si channel and the NiSi S/D contact allowed conduction by electrons and holes, resulting in artificial synaptic behavior in both p-type and n-type regions. A slow polarization reaction by the mobile ions such as anions (CH3COO− and OH−) and cations (H+) in the chitosan EDL induced hysteresis window in the transfer characteristics of the ambipolar TFTs. We demonstrated the excitatory post-synaptic current modulations and stable conductance modulation through repetitive potentiation and depression pulse. We expect the proposed ambipolar chitosan synaptic transistor that responds effectively to both positive and negative stimulation signals to provide more complex information process versatility for bio-inspired neuromorphic computing systems.