As industries are under pressure for shorter business and product lifecycles, there is an extensive effort from the research community for novel and profitable automation processes. This effort has given rise to the 5G Tactile Internet, which is characterized by extremely low latency communication in combination with high availability, reliability and security. In this paper, we discuss the key technologies to support the Tactile Internet characteristics in industrial environments and, then, we showcase the implementation of a novel 5G NFV-enabled experimental platform. Given that ultra-reliable low-latency communications is crucial for the manufacturing process, we demonstrate that, in our setup, sub-millisecond end-to-end communication is attainable, proving the suitability of our platform for tactile Internet industrial applications.
27 July 2016 in IEEE/ACM Transactions on Networking
Collisions are a main cause of throughput degradation in wireless local area networks. The current contention mechanism used in the IEEE 802.11 networks is called carrier sense multiple access with collision avoidance (CSMA/CA). It uses a binary exponential backoff technique to randomize each contender attempt of transmitting, effectively reducing the collision probability. Nevertheless, CSMA/CA relies on a random backoff that while effective and fully decentralized, in principle is unable to completely eliminate collisions, therefore degrading the network throughput as more contenders attempt to share the channel. To overcome these situations, carrier sense multiple access with enhanced collision avoidance (CSMA/ECA) is able to create a collision-free schedule in a fully decentralized manner using a deterministic backoff after successful transmissions. Hysteresis and fair share are two extensions of CSMA/ECA to support a large number of contenders in a collision-free schedule. CSMA/ECA offers better throughput than CSMA/CA and short-term throughput fairness. This paper describes CSMA/ECA and its extensions. In addition, it provides the first evaluation results of CSMA/ECA with non-saturated traffic, channel errors, and its performance when coexisting with CSMA/CA nodes. Furthermore, it describes the effects of imperfect clocks over CSMA/ECA and presents a mechanism to leverage the impact of channel errors and the addition/withdrawal of nodes over collision-free schedules. Finally, the experimental results on throughput and lost frames from a CSMA/ECA implementation using commercial hardware and open-source firmware are presented.
In this paper a candidate protocol to replace the prevalent CSMA/CA medium access control in Wireless Local Area Networks is presented. The proposed protocol can achieve higher throughput than CSMA/CA, while maintaining fairness, and without additional implementation complexity. Under certain circumstances, it is able to reach and maintain collision-free operation, even when the number of contenders is variable and potentially large. It is backward compatible, allowing for new and legacy stations to coexist without degrading one another's performance, a property that can make the adoption process by future versions of the standard smooth and inexpensive.
The ability to perform traffic differentiation is a promising feature of the current Medium Access Control (MAC) in Wireless Local Area Networks (WLANs). The Enhanced Distributed Channel Access (EDCA) protocol for WLANs proposes up to four Access Categories (AC) that can be mapped to different traffic priorities. High priority ACs are allowed to transmit more often than low priority ACs, providing a way of prioritising delay sensitive traffic like voice calls or video streaming. Further, EDCA also considers the intricacies related to the management of multiple queues, virtual collisions and traffic differentiation. Nevertheless, EDCA falls short in efficiency when performing in dense WLAN scenarios. Its collision-prone contention mechanism degrades the overall throughput to the point of starving low priority ACs, and produce priority inversions at high number of contenders. Carrier Sense Multiple Access with Enhanced Collision Avoidance (CSMA/ECA) is a compatible MAC protocol for WLANs which is also capable of providing traffic differentiation. Contrary to EDCA, CSMA/ECA uses a contention mechanism with a deterministic backoff technique which is capable of constructing collision-free schedules for many nodes with multiple active ACs, extending the network capacity without starving low priority ACs, as experienced in EDCA. This work analyses traffic differentiation with CSMA/ECA by describing the mechanisms used to construct collision-free schedules with multiple queues. Additionally, evaluates the performance under different traffic conditions and a growing number of contenders. Furthermore, it introduces a way to eliminate Virtual Collisions (VC), which also contributes to the throughput degradation in EDCA WLANs. Simulation tests are performed using voice and video packet sources that emulate commonly used codecs. Results show CSMA/ECA outperforming EDCA in different commonly-found scenarios with high number of users, including when both MAC protocols coexist in the same WLAN.
This paper deals with Internet of Things (IoT) data analytics in a collaborative platform where computing resources are available both at the network edge and at the backend cloud. Thereby, the requirements of both low-latency and delay tolerant IoT applications can be met. Moreover, this platform faces the challenging heterogeneous features of IoT data, i.e. its high dimensionality or its geo-distributed and streaming data nature. The proposed approach relies on two pillars. On the one hand, recent advances of machine learning (ML) techniques are leveraged to describe how the IoT data analytics can be performed in our platform. On the other hand, the virtualization, centralized management, global view and programmability of the computing and network resources is considered to fulfill the requirements of the ML methods. Unlike the related work, herein the interplay and synergies between those two pillars is explained. Also the ML methods for this collaborative platform are described in more detail.
In Software Defined Networks (SDN) a Controller installs forwarding rules or queries the status of network devices through a separate control channel using the OpenFlow protocol. Such queries may ask for instantaneous metrics, like port status, packet error rate, or transmitted packets. In turn, the Controller uses these metrics, or context, to condition forwarding rules. As network conditions change over time, forwarding rules are set to expire if not used (or matched) during a configurable idle timeout. Consequently, they are erased from the flow table, forcing a query to the Controller every time a packet for which there is no forwarding rule arrives at the network device. This work presents experimental results showing the delay increase produced by timing out forwarding rules of periodic flows, such as the generated by sensors in IoT deployments. Furthermore, it proposes and experimentally evaluates a pro-active forwarding rule installation mechanism able to reduce such delay by 90%, easing the implementation of context-aware forwarding strategies for IoT.