This article based on the standards IEC61967-8 and IEC62132-8 aims to provide a new method to expand the working bandwidth of the closed version IC-Stripline cell. By analyzing the working principle and discussing the limiting factors of the working bandwidth, this article presents the slotted septum method and the dielectric method to expand the working bandwidth of the IC-Stripline cell. A 3-D model of the IC-Stripline cell is established in the 3-D electromagnetic (EM) simulation software, and the $S$ -parameters and voltage standing wave ratio (VSWR) of the IC-Stripline cell are calculated. The calculation results show that the slotted septum method and the dielectric method can expand the working frequency band of the IC-Stripline cell from 0–6 to 0–7 and 0–11 GHz, respectively. The measurement results are consistent with the simulation results. In the end, the field uniformity is analyzed, and the results show that both methods have no significant impact on the field uniformity of the cell.
24 February 2025 in IEEE Transactions on Antennas and Propagation
This study presents a deep learning-based method for the precise inversion of electromagnetic radiation sources, utilizing amplitude data from multi-channel near-field scans to infer equivalent dipole array parameters. Unlike traditional heuristic search methods or interpolation-based artificial neural networks(ANN), the proposed model combines residual networks with channel attention mechanisms to effectively capture the intrinsic nonlinear relationships among multi-directional near-field data and their correlations with dipole parameters, thereby streamlining the inverse mapping process from near-field measurements to dipole parameters. Comprehensive simulations and experimental results, including scenarios with patch antennas at varying heights and MCU chips, validate the robustness and accuracy of the proposed model.
12 January 2026 in IEEE Transactions on Reliability
As we delve deeper into the post-Moore era, integrated circuits (ICs) confront escalating electromagnetic reliability (EMR) challenges. Traditional electromagnetic compatibility (EMC) frameworks fall short in addressing the lifetime performance degradation of nano-scale ICs operating in multi-physics environments. This review offers a comprehensive synthesis of IC EMR advancements spanning the past decade (2013-2023), a period chosen because 28 nm to 3 nm scaling and the 2014/2020 revisions of AEC-Q100 and IEC 62132 introduced new degradation mechanisms not covered by earlier surveys. It establishes a consolidated framework of influencing factors, categorizing them into four interdependent domains: process scaling, GHz-band effects, 3D packaging, and application environments, thereby bridging critical literature gaps. The review also delves into emergent trends like multi-physics field modeling, automotive-grade AEC-Q100 compliance, and in-situ aging monitoring, proposing innovative data-driven solutions for pressing industry concerns. These solutions include standardized quantitative evaluation, chip-level electromagnetic interference (EMI) suppression, and lifetime prediction under harsh environmental conditions. The review culminates in presenting a forward-looking roadmap for next-generation EMR design, emphasizing AI-optimized shielding, self-healing circuits, and heterogeneous integration. These strategies are crucial for mitigating catastrophic system risks in safety-critical applications such as aerospace, automotive, and IoT.
With the purpose of radiation emissions and immunity measurement of large size and high-frequency integrated circuits (ICs), three closed version IC-Stripline cells conforming to the IEC standardswere designed in this paper to expand the uniform field region and the working frequency band of the traditional IC-Stripline cell. In these cells, the long version IC-Stripline cell expands the 3 dB uniform field region of the traditional IC-Stripline cell from 3 × 3 cm to 3 × 8 cm, with the working bandwidth remaining as 6 GHz. The IC-Stripline cell based on image theory further expands the 3 dB uniform field region into two 3 × 8 cm areas with the working bandwidth unchanged. The third cell is a scaled-down IC-Stripline cell based on image theory, which can expand the working bandwidth from 6 GHz to 12 GHz and the total area of the uniform field region is equivalent to that of the traditional IC-Stripline cell.
28 August 2023 in IEEE Transactions on Electron Devices
Prediction of electrostatic discharge (ESD) protection performance is critical for estimating reliability in the IC design. However, due to the large injection and deep hysteresis encountered in the snapback of ESD devices, the failure current of ESD devices is hard to be predicted by simulation. In this article, a TCAD simulation method using the shot noise model to predict the failure current of ESD devices is proposed for the first time. The transmission line pulse (TLP) test results show the same trend as the simulation results, indicating that this method is convenient and effective to predict the ESD failure current. It is promising applications for the design of ESD devices and full-chip network protection.
30 July 2024 in IEEE Transactions on Microwave Theory and Techniques
With the rapid development of the integrated circuit (IC) industry, high-frequency circuits have been increasingly integrated into ICs. While this increases the operating frequency of ICs, it also brings serious electromagnetic compatibility (EMC) risks. In order to measure the IC’s radiation emission and immunity, the IC-Stripline cell is required. However, the commonly used IC-Stripline cell has an effective frequency range of 0–6 GHz. Based on the international EMC standards, in this work, we apply magnetic absorbing materials (MAM) to the IC-Stripline cell to expand its effective frequency range. We calculate the parameter range of MAM using a combination method of 3-D electromagnetic (EM) simulation and neural network fitting (NNF), which does not only ensure the accuracy of the calculation results but also shortens the simulation time. Our results show that the two selected embodiments have expanded the effective frequency ranges from 0 to 6 GHz, 0 to 9 GHz, and 0 to 10 GHz, respectively. Compared with the method using only 3-D EM simulation, the efficiency of the proposed method is improved by ( $1-\alpha ^{3})$ , where $\alpha $ is the accuracy of parameters, significantly reducing the computational workload. Our method is also applicable to other situations where parameter ranges need to be calculated.