Leonidas Zouloumis

Mr. Leonidas Zouloumis

University of Western Macedonia, Kozáni, Dytikí Makedonía, Greece

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 August 2023 in Sustainable Energy, Grids and Networks
Verified
Journal Article
Closed access
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
Nikolaos PloskasNikolaos Ploskas
Nikolaos Ploskas
Giorgos PanarasGiorgos Panaras
Giorgos Panaras

1 November 2021 in Energies
Verified
Journal Article
Open access
PDF file
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
Georgios StergianakosGeorgios Stergianakos
Georgios Stergianakos
Nikolaos PloskasNikolaos Ploskas
Nikolaos Ploskas
Giorgos PanarasGiorgos Panaras
Giorgos Panaras
In recent decades, building design and operation have been an important field of study, due to the significant share of buildings in global primary energy consumption and the time that most people spend indoors. As such, multiple studies focus on aspects of building energy consumption and occupant comfort optimization. The scientific community has discerned the importance of operation optimization through retrofitting actions for on-site building energy systems, achieved by the use of simulation techniques, surrogate modeling, as well as the guidance of existing building performance and indoor occupancy standards. However, more knowledge should be attained on the matter of whether this methodology can be extended towards the early stages of thermal system and/or building design. To this end, the present study provides a building thermal system design optimization methodology. A data set of minimum thermal system power, for a typical range of building characteristics, is generated, according to the criterion of occupant discomfort in degree hours. Respectively, a surrogate model, providing a configurable correlation of the above set of thermal system dimensioning solutions is developed, using regression model fitting techniques. Computational results indicate that such a model could provide both desirable calculative simplification and accuracy on par with existing respective thermal load calculation standards and simplified system dimensioning methods.

30 June 2025 in Energies
Verified
Journal Article
Open access
PDF file
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
Nikolaos PloskasNikolaos Ploskas
Nikolaos Ploskas
NTNikolaos Taousanidis
Nikolaos Taousanidis
Giorgos PanarasGiorgos Panaras
Giorgos Panaras
The significant contribution of buildings to the global primary energy consumption necessitates the application of energy management methodologies at a building scale. Although dynamic simulation tools and decision-making algorithms are core components of energy management methodologies, they are often accompanied by excessive computational cost. As future controlling structures tend to become autonomized in building heating layouts, encouraging distributed heating services, the research scope calls for creating lightweight building energy system modeling as well monitoring and controlling methods. Following this notion, the proposed methodology turns a programmable controller into a smart thermostat that utilizes surrogate modeling formed by the ALAMO approach and is applied in a 4-m-by-4-m-by-2.85-m environmental chamber setup heated by a heat pump. The results indicate that the smart thermostat trained on the indoor environmental conditions of the chamber for a one-week period attained a predictive RMSE of 0.082–0.116 °C. Consequently, it preplans the heating hours and applies preheating controlling strategies in real time effectively, using only the computational power of a conventional controller, essentially managing to attain at least 97% thermal comfort on the test days. Finally, the methodology has the potential to meet the requirements of future building energy systems featured in urban-scale RES-based district heating networks.

25 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
AKAngelos Karanasos
Angelos Karanasos
Nikolaos PloskasNikolaos Ploskas
Nikolaos Ploskas
Giorgos PanarasGiorgos Panaras
Giorgos Panaras
This work focuses on the determination of the design and operation parameters of a thermal system depending on the optimization objective set. Its main objective and contribution concern the proposal of a generalized methodological structure involving multiobjective optimization techniques aimed at providing a solution to a practical problem, such as the design and dimensioning of a solar thermal system. The analysis is based on system operation data provided by a dynamic simulation model, leading to the development of multiple surrogate models of the thermal system. The thermal system surrogate models correlate the desired optimization objectives with thermal system design and operation parameters while additional surrogate models of the Pareto frontiers are generated. The implementation of the methodology is demonstrated through the optimal design and operation parameter dimensioning of a solar-assisted geothermal heat pump that provides domestic hot water loads of an office building. Essentially, energy consumption is optimized for a desired domestic hot water thermal load coverage. Implementation of reverse-engineering methods allows the determination of the system parameters representing the optimized criteria.

6 June 2026 in Energies
Verified
Journal Article
Open access
PDF file
MSMichail Sourgoutsidis
Michail Sourgoutsidis
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
VKVasileios Kilis
Vasileios Kilis
EGEffrosyni Giama
Effrosyni Giama
AVAndreas P. Vouros
Andreas P. Vouros
Giorgos PanarasGiorgos Panaras
Giorgos Panaras
Accurate design and performance assessment of solar thermal domestic hot water systems coupled with a heat pump auxiliary typically requires transient simulation, as the system’s behavior depends on multiple interactions among collector characteristics, storage stratification, control logic, weather, and draw-off timing. Monthly methods such as the f-chart are useful for first-pass estimates, but they do not resolve stratification, thermostat operation, or demand timing, and they may become inaccurate for stratified thermostat-controlled systems. Direct comparisons of locally inspectable symbolic and black-box surrogate families for this system class remain limited. A 10,982-case development dataset was generated from minute-resolved annual MATLAB simulations, parameterized by collector area, optical efficiency, and first- and second-order loss coefficients. Three surrogate families were benchmarked under a unified protocol, random forest-assisted shape-constrained symbolic regression (SR), feed-forward artificial neural network (ANN) models, and Automatic Learning of Algebraic Models for Optimization (ALAMO), with the f-chart used as a monthly reference method. The targets were the 12 monthly solar fractions under the direct solar heat definition and the corresponding annual mean solar fraction, evaluated on the same independent 991-case test set. SR achieved the lowest average error (mean absolute percentage error, MAPE = 0.82%; root mean square error, RMSE = 0.006), followed by the ANN (MAPE = 2.07%, RMSE = 0.028) and ALAMO (MAPE = 3.67%, RMSE = 0.060), with Nash–Sutcliffe efficiency (NSE) values above 0.98 for all models. Evaluation times were 0.0026–0.124 s per target, compared with about 1000 s for one full-year simulation. These results define the study as a common protocol benchmark within the studied simulator-defined envelope. SR gives the strongest accuracy with local symbolic inspectability, the ANN remains the flexible retrainable option, and ALAMO provides compact algebraic evaluation with the shortest learned model runtime.

17 October 2022
Verified
Conference Paper
Closed access
Leonidas ZouloumisLeonidas Zouloumis
Leonidas Zouloumis
NPNikolaos Ploskas
Nikolaos Ploskas
Giorgos PanarasGiorgos Panaras
Giorgos Panaras
Recent decade research activity has focused on the reduction of the global building sector energy consumption since its contribution to the global primary energy consumption has been made known. Progress towards the optimal provision of heating load to buildings has been achieved with the implementation of district heating networks (DHN). The DHN flexibility is considered as a crucial factor to the evolution of thermal networks, as well as their decarbonization. This work investigates prospects on how thermal comfort intertwines with building parameters, such as thermal mass category and end-user heating power. The substation is exposed to different controlling strategies and peak-shaving scenarios. The simulations have uncovered a non-linear correlation between maximum peak-shaving potential of a substation and the discomfort of the end-user. Future work involves a more specific approach in peak-shaving potential identification and implementation of predictive controlling strategies and building surrogate model.