This paper provides a comprehensive review of the literature regarding the modeling and control of piezoelectric inertia–friction actuators (PIFAs). Examples of PIFAs are impact drive mechanisms (IDMs) and friction-driving actuators (FDAs). In this paper, the critical challenges are first identified in modeling and control of PIFAs. Second, a general architecture of PIFAs is proposed to facilitate the analysis and classification of the literature regarding modeling and control of PIFAs. This general architecture covers all types of PIFAs (e.g., FDAs, IDMs) and thus serves as a general conceptual model of PIFAs. There is an additional benefit with this general architecture of PIFAs, namely that it is conducive to innovation in PIFAs, as new specific PIFAs may be designed in order to tailor to a specific application (for example, both FDAs and IDMs are viewed as specific PIFAs). Finally, the paper presents future directions in modeling and control for further improvement of the performance of PIFAs.
Dielectric elastomers (DEs) are polymer materials consisting of a network of polymer chains connected by covalent cross-links. This type of structural feature allows DEs to generate large displacement outputs owing to the nonlinear electromechanical coupling and time-dependent viscoelastic behavior. The major challenge is to properly actuate the nonlinear soft materials in applications of robotic manipulations. To characterize the complex time-dependent viscoelasticity of the DEs, a nonlinear rheological model is proposed to describe the time-dependent viscoelastic behaviors of DEs by combining the advantages of the Kelvin–Voigt model and the generalized Maxwell model. We adopt a Monte Carlo statistical simulation method as an auxiliary method, to the best knowledge of the author which has never reportedly been used in this field, to improve the quantitative prediction ability of the generalized model. The proposed model can simultaneously describe the DE deformation processes under step voltage and alternating voltage excitation. Comparisons between the numerical simulation results and experimental data demonstrate the effectiveness of the proposed generalized rheological model with a maximum prediction error of 3.762% and root-mean-square prediction error of 9.03%. The results presented herein can provide theoretical guidance for the design of viscoelastic DE actuators and serve as a basis for manipulation control to suppress the viscoelastic creep and increase the speed response of the dielectric elastomer actuators (DEA).
Dielectric elastomer actuator (DEA) based on dielectric elastomer holds promising applications in soft robotics. Compliant electrodes with large stretchability and high electrical conductivity are the vital components for the DEAs. In this study, a type of DEA was developed using carbon nanotube/polyvinyl alcohol (CNT/PVA) hydrogel electrodes. The CNT/PVA hydrogel electrodes demonstrate a stretchability up to 200% with a small relative resistance change of approximately 1.2, and a self-healing capability. The areal strain of the DEA based on the CNT/PVA hydrogel electrodes is more than 40%, much higher than the ones based on pure PVA electrodes.
With large deformability and high energy density, Dielectric elastomers (DEs) deserve interest in soft robotics. Many challenges remain in the real-world applications, for the dynamic performance of dielectric elastomer actuator and their energy efficiency are affected by the dissipation mechanisms in the actuators. Concerning the viscoelasticity of DEs, we present a modeling approach to describe the dissipation mechanism to predict how the dissipative process affects the dynamic behavior. The validity and generalization of the model have been extensively verified under various excitation voltages (different peak voltages, frequencies, pre-stretching, and signal waveforms). For harmonic voltages at different frequencies (0.05, 0.1, 0.2, 0.5, 1 Hz), the root mean square error is less than 5.99%. The phase difference was adopted to quantify the viscoelastic hysteresis dissipative behavior of DEs. The results show that the viscoelastic hysteresis is sensitive to frequency and waveform. In addition, we found that the viscoelastic hysteresis of the DEs under harmonic excitation can be improved by inserting a small amount of saw-tooth excitation loads. This finding is particularly useful for the actuation of soft actuators and soft robots, which use alternating loads as the dominant excitation signal. For future applications, this model presents a method to describe the dissipative behaviors in dynamic actuation quantitatively and paves the way to high-performance actuation control and manipulations for soft robots.
30 May 2017 in Journal of Shanghai Jiaotong University (Science)