Flood management is an important topic worldwide. Precipitation is the most crucial factor in reducing flood-related risks and damages. However, its adequate quality and sufficient quantity are not met in many parts of the world. Currently, near real-time satellite precipitation products (NRT SPPs) have great potential to supplement the gauge rainfall. However, NRT SPPs have several biases that require corrections before application. As a result, this study investigated two statistical bias correction methods with different parameters for the NRT SPPs and evaluated the adequacy of its application in the Fuji River basin. We employed Global Satellite Mapping of Precipitation (GSMaP)-NRT and Integrated Multi-satellitE Retrievals for GPM (IMERG)-Early for NRT SPPs as well as BTOP model (Block-wise use of the TOPMODEL (Topographic-based hydrologic model)) for flood runoff simulation. The results showed that the corrected SPPs by the 10-day ratio based bias correction method are consistent with the gauge data at the watershed scale. Compared with the original SPPs, the corrected SPPs improved the flood discharge simulation considerably. GSMaP-NRT and IMERG-Early have the potential for hourly river-flow simulation on a basin or large scale after bias correction. These findings can provide references for the applications of NRT SPPs in other basins for flood monitoring and early warning applications. It is necessary to investigate the impact of number of ground observation and their distribution patterns on bias correction and hydrological simulation efficiency, which is the future direction of this study.

Parameter sensitivity analysis is a significant part of quantifying model uncertainty, effectively identifying key parameters, and improving the efficiency of parameter optimization. The Soil and Water Assessment Tool (SWAT) model was applied to the upper Heihe River basin (UHRB) in China to simulate the monthly runoff for 11 years (1990–2000). Four typical sensitivity analyses, namely, the Morris screening, Sobol analysis, Fourier amplitude sensitivity test (FAST), and extended Fourier amplitude sensitivity test (EFAST), were used to determine the critical parameters affecting hydrological processes. The results show that the sensitivity parameters defined by the four methods were significantly different, resulting in a specific difference in the simulation effect of the SWAT model. The reason may be the different sampling process, sensitivity index, and calculation principle of each method. The snow-melt base temperature (SMTMP) and snowfall temperature (SFTMP) related to the snow-melt process, the available water capacity of the soil layer (SOL_AWC), saturated hydraulic conductivity (SOL_K), depth from the soil surface to the bottom of the layer (SOL_Z), moist bulk density (SOL_BD), deep aquifer percolation fraction (RCHRG_DP), and threshold depth of water in the shallow aquifer required for return flow to occur (GWQMN) related to the soil water and groundwater movement, baseflow alpha factor for bank storage (ALPHA_BNK) related to the base flow regression, and average slope steepness (HRU_SLP) are all very sensitive parameters. The 10 key parameters were optimized 100 times with the sequential uncertainty fitting procedure version 2 (SUFI-2). The Nash–Sutcliffe efficiency coefficient (NSE), Kling–Gupta efficiency coefficient (KGE), mean square error (MSE), and percentage bias (PBIAS) were 0.89, 200, 8.60, and 0.90, respectively. The simulation results are better than optimizing the sensitive parameters defined by the single method and all the selected parameters. The differences illustrate the rationality and importance of parameter sensitivity analysis for hydrological models and the synthesis of multiple approaches to define sensitive parameters. These conclusions have reference significance in the parameter optimization of the SWAT model when studying alpine rivers by constructing the SWAT model.

Ten years after the Predictions in Ungauged Basins (PUB) initiative was put forward, known as the post-PUB era (2013 onwards), reducing uncertainty in hydrological prediction in ungauged basins still receives considerable attention. This integration or optimization of the traditional regionalization approaches is an effective way to improve the river discharge simulation in the ungauged basins. In the Jialing River, southwest of China, the regression equations of hydrological model parameters and watershed characteristic factors were firstly established, based on the block-wise use of TOPMODEL (BTOP). This paper explored the application of twelve regionalization approaches that were combined with the spatial proximity, physical similarity, integration similarity, and regression-augmented approach in five ungauged target basins. The results showed that the spatial proximity approach performs best in the river discharge simulation of the studied basins, while the regression-augmented regionalization approach is satisfactory as well, indicating a good potential for the application in ungauged basins. However, for the regression-augmented approach, the number of watershed characteristic factors considered in the regression equation impacts the simulated effect, implying that the determination of optimal watershed characteristic factors set by the model parameter regression equation is a crux for the regression-augmented approach, and the regression strength may also be an influencing factor. These findings provide meaningful information to establish a parametric transfer equation, as well as references for the application in data-sparse regions for the BTOP model. Future research should address the classification of the donor basins under the spatial distance between the reference basin and the target basin, and build regression equations of model parameters adopted to regression-augmented regionalization in each classification group, to further explore this approach’s potential.