Stochastic parallel gradient descent (SPGD) is the most frequently used optimization algorithm for correcting wavefront distortion in the wavefront sensorless adaptive optics(WFS-Less AO)system. However, the convergence speed of the SPGD algorithm becomes slow rapidly as increasing of distortion, and the probability of falling into local optimum is rising owing to the fixed gain coefficient. It cannot meet the requirement of real-time wavefront distortion correction. Therefore, a novel algorithm is proposed in this paper, called as adaptive gain stochastic parallel gradient descent (AGSPGD) based on the AMSGrad optimizer in the deep learning, to improve the convergence speed of the algorithm and to reduce the probability of falling into local optimum. The AGSPGD algorithm adopts the first-order moment and the second-order moment of the performance index, which are combined to dynamically adjust the gain. The numerical simulations are completed in this article. The results of ${\bm{D}}/\ {{\bm{r}}}_0 = \ 2.5$ conditions demonstrate that the AGSPGD can reduce the number of iterations by 25%, and the probability of the algorithm falling into local optimum is reduced from 16% to 4%. In addition, the AGSPGD still outperforms the SPGD as ${\bm{D}}/{{\bm{r}}}_0$ increasing.
Considerable efforts are underway to rationally design and synthesize novel electrode materials for high-performance supercapacitors (SCs). However, the creation of suitable materials with high capacitance remains a big challenge for energy storage devices. Herein, unique three-dimensional (3D) ZnO hexagonal cubes on carbon cloth (ZnO@CC) were synthesized by invoking a facile and economical hydrothermal method. The mesoporous ZnO@CC electrode, by virtue of its high surface area, offers rich electroactive sites for the fast diffusion of electrolyte ions, resulting in the enhancement of the SC’s performance. The ZnO@CC electrode demonstrated a high specific capacitance of 352.5 and 250 F g−1 at 2 and 20 A g−1, respectively. The ZnO@CC electrode revealed a decent stability of 84% over 5000 cycles at 20 A g−1 and an outstanding rate-capability of 71% at a 10-fold high current density with respect to 2 A g−1. Thus, the ZnO@CC electrode demonstrated improved electrochemical performance, signifying that ZnO as is promising candidate for SCs applications.
Manganese dioxide (MnO2)-based nanostructures are promising electrode materials for supercapacitors (SCs) due to their low cost, eco-friendly nature, and high theoretical capacitance. However, the conductivity of MnO2 is poor, which is a big problem when trying to achieve the desired capacitance value. Herein, hexagonal-phase MnO2 nanoparticles (NPs) are directly grown on a 3D conductive carbon cloth (CC) (denoted as MnO2-NPs@CC) as a binder-free electrode through a simple and scalable hydrothermal strategy. The results show that MnO2-NPs@CC with a large specific surface area and high porosity could be employed as a positive electrode material for high-performance SCs. Owing to these attractive properties, the MnO2-NPs@CC electrode delivers a high specific capacitance of 660 F/g at a current density of 2 A/g in 6 M KOH aqueous electrolytes. Moreover, the MnO2-NPs@CC electrode demonstrates excellent cycling stability with high capacitance retention of 92.8% over 10,000 cycles. Such remarkable findings suggest that MnO2-NPs@CC with enhanced electrochemical performance is a favorable electrode material for next-generation high-performance SCs.