In a networked multi-axis motion control task, faults in any motor will cause the performance degradation of cooperative operation, which may considerably affect the whole network and the quality of products. The main objective of this paper is to propose an improved observer-based fault-tolerant tracking control approach for industrial multi-agent systems. Firstly, a group of new distributed intermediate estimators is presented, where the design structure is modified to enhance the feasibility of the estimation scheme. It is shown that the both of the nominal distributed intermediate estimator and the traditional extended state observer are special cases of the proposed estimator. Secondly, the estimation performance can be improved significantly via an online reinforcement learning estimation strategy, whose core is an adaptive switching mechanism integrated with a function block of source fault mode localization. Benefiting from satisfactory estimation results, good fault-tolerant tracking control performance can be guaranteed despite of multiple faults and disturbances. The application to a networked multi-axis motion control system demonstrates the effectiveness and superiority of the proposed method.
29 October 2021 in IEEE Transactions on Instrumentation and Measurement
This article is concerned with the identification of industrial robot dynamics parameters, and an identification method based on a nonlinear friction model and a least squares (LS) with symbiotic organisms search (SOS) algorithm is proposed. First, according to the friction characteristics of robot joints, for the nonlinear Tustin friction model, two parameters are introduced to describe the Stribeck characteristics of Coulomb friction and static friction. Then, the joint velocity trajectory that can offset the nonfriction torque during the forward and reverse rotation is designed, and friction parameters are estimated by using LS. Based on the optimal criterion constructed by Hadamard’s inequality, the excitation trajectory represented by the Fourier series is designed, and the combined inertial parameter set is estimated by using LS. Second, select the minimum inertial parameters and friction parameters (minimum dynamic parameters) as the center points to search the upper and lower bounds; design the fitness function with adjustable weights of each joint and use the SOS algorithm to estimate the minimum dynamic parameter set as a whole. Finally, a variety of parameter identification algorithms are applied to the Stäubli TX-90 robot under the same excitation trajectory. The experiment results show that the root-mean-square (rms) error of the joint torque estimated by the proposed method is the smallest. By executing the verification trajectory, the experiment results show that the rms error of the joint torque is small and the correlation coefficient is close to 1, thereby verifying the effectiveness of the estimated model for different motion trajectories.
13 September 2023 in IEEE/ASME Transactions on Mechatronics
The fault-tolerant control problem of the flexible multijoint manipulator is a difficult issue due to its strong nonlinearity and coupling. This article proposes a reinforcement learning (RL) based model-free adaptive fault-tolerant control (MFAFTC) algorithm for the multi-joint manipulator. First, a parameter estimation mode switching mechanism is designed based on the two dimensions of the time axis and the sampling period, where an iterative estimation structure is introduced to identify some key parameters online accurately. Meanwhile, the radial basis function neural network is used to identify the spring interference as well as actuator fault, and a compensation fault-tolerant control strategy is proposed. Moreover, the computation complexity is optimized via designing the critic–actor mechanism with an event-trigger parameter selection strategy. Finally, the superiority and effectiveness of the proposed method are verified by the application to the Baxter robot.
5 July 2021 in IEEE Transactions on Instrumentation and Measurement
This article considers the robust estimation problem of linear multisensor systems subject to constraints and additive and multiplicative uncertainties where the decaying of measurements is regarded as the multiplicative uncertainty when taking into account the fading channels between the estimator and sensors. Based on the H ∞ performance criterion, a moving horizon H ∞ estimation algorithm is proposed from an approximation of the H ∞ full information estimation, which describes the estimation problem as a minimax optimization problem. Sufficient conditions for the feasibility and stability of the proposed algorithm are discussed, under which the estimation errors are ultimately bounded. To reduce the difficulty of solving minimax problem, an approximate solution is provided. The simulation comparison results show the effectiveness of the proposed algorithm.
16 February 2021 in IEEE/ASME Transactions on Mechatronics
In mobile robots, the process or actuator faults caused by the aging of system components or misoperations may have a strong impact on the real-time control performance; however, it is still hard to identify them accurately online. This article is concerned with the fault reconstruction problem of mobile robots. To be specific, a novel intermediate estimator is proposed to reconstruct the faults, where the estimation performance is guaranteed in the sense of driving the estimation errors to a small prescribed energy bound via a two-dimensional gain-regulation mechanism. It is shown that the proposed estimator is more accurate than the existing extended state observers and nominal intermediate estimator. The experimental test verifies the effectiveness and superiority of the proposed fault reconstruction scheme.
This study is concerned with the attack detection (AD) problems in finite frequency domain for cyber‐physical systems with sensor attack. The frequency domain is divided into three frequency domains of low, medium and high, multiple AD filters are designed to work simultaneously. The attack detectionAD problem is transformed into a multi‐objective optimisation schemes for each finite frequency domain. Finally, the experimental results of networked motion control system are given to verify the effectiveness and superiority of proposed method.