29 October 2021 in IEEE Transactions on Instrumentation and Measurement
This article is concerned with the identification of industrial robot dynamics parameters, and an identification method based on a nonlinear friction model and a least squares (LS) with symbiotic organisms search (SOS) algorithm is proposed. First, according to the friction characteristics of robot joints, for the nonlinear Tustin friction model, two parameters are introduced to describe the Stribeck characteristics of Coulomb friction and static friction. Then, the joint velocity trajectory that can offset the nonfriction torque during the forward and reverse rotation is designed, and friction parameters are estimated by using LS. Based on the optimal criterion constructed by Hadamard’s inequality, the excitation trajectory represented by the Fourier series is designed, and the combined inertial parameter set is estimated by using LS. Second, select the minimum inertial parameters and friction parameters (minimum dynamic parameters) as the center points to search the upper and lower bounds; design the fitness function with adjustable weights of each joint and use the SOS algorithm to estimate the minimum dynamic parameter set as a whole. Finally, a variety of parameter identification algorithms are applied to the Stäubli TX-90 robot under the same excitation trajectory. The experiment results show that the root-mean-square (rms) error of the joint torque estimated by the proposed method is the smallest. By executing the verification trajectory, the experiment results show that the rms error of the joint torque is small and the correlation coefficient is close to 1, thereby verifying the effectiveness of the estimated model for different motion trajectories.
26 September 2022 in IEEE Transactions on Instrumentation and Measurement
This study proposes an external force estimation method based on the error probability model and a sliding window variational adaptive Kalman filter (SWVAKF) for the problem of industrial robot external force estimation. A probability model with a normal distribution was provided, in which the covariance was linearly related to the joint velocity to address the uncertainty in the estimation error of the friction model. A normal distribution probability model was presented to address the time-varying characteristics of the contact external force when the robot interacts with the environment, in which the covariance of the derivative term of the external force was linearly related to the estimated external force. The robot interaction process was dynamically modeled using generalized momentum and external force as state variables, friction estimation deviation and external force derivative term as random interference, and generalized momentum with normally distributed noise as the measurement output. The parameters of the probability model of random interference items were determined by analyzing the experimental data of system identification, and the covariance related to joint velocity and external force was obtained. A set of adaptive scale factors related to the joint velocity and estimated force change rate when the robot interacts with the environment is proposed, and then the error covariance estimated based on the error probability model and the SWVAKF algorithm is fused by the adaptive scale factor, and a covariance of friction deviation and external force derivative term in the robot interaction process and an external force estimation method were provided. Experimental results reveal that the proposed method reduces the root-mean-square (RMS) error by 17.07% compared to the standard Kalman external force estimation method and has a better external force estimation effect.
5 August 2020 in International Journal of Control, Automation, and Systems
5 September 2024 in Measurement Science and Technology
Arresters are one of the critical components of the power system. However, due to the arrester’s regular and uniform umbrella skirt, both traditional manual detection methods and existing computer vision approaches exhibit limitations in accuracy and efficiency. This paper proposes an automatic, robust, efficient arrester point cloud registration method to address this problem. First, a robotic arm maneuvers a depth camera to capture point cloud data from various perspectives. Then, the fast global registration point cloud coarse registration method based on the signature of histograms of orientations descriptor to produce preliminary registration results. This result is ultimately used as the initial value of the improved iterative closest point algorithm to refine the registration further. Experimental results on various data sets collected from arrester and public data sets show that the algorithm’s root mean square error is less than 0.1 mm, meeting the requirements of the engineering application of arrester detection.
1 January 2005 in MRS Proceedings
24 February 2026 in Communications in Nonlinear Science and Numerical Simulation