Lokeshwaran Srinivasan

Dr. Lokeshwaran Srinivasan

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2022 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
MKMohan Kumar Kandasamy
Mohan Kumar Kandasamy
AGArumaikkannu Ganesan
Arumaikkannu Ganesan
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan

1 February 2026 in Polymers
Verified
Journal Article
Open access
PDF file
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan
LRLalitha Radhakrishnan
Lalitha Radhakrishnan
EVEzhilmaran V
Ezhilmaran V
Faseeulla Khan MohammadFaseeulla Khan Mohammad
Faseeulla Khan Mohammad
Syed Quadir MoinuddinSyed Quadir Moinuddin
Syed Quadir Moinuddin
HAHussain Altammar
Hussain Altammar
In this study, thermoplastic polyurethane (TPU) parts were fabricated using fused filament fabrication (FFF) by varying key process parameters, namely extruder temperature (210–230 °C), layer thickness (200–400 µm), and printing speed (30–50 mm/s). A Box–Behnken experimental design was used to systematically evaluate the combined influence of these parameters on surface roughness (Ra), dimensional deviation (DD), and ultimate tensile strength (UTS). After fabrication, all specimens were subjected to a Tetrahydrofuran (THF)-based chemical smoothing process to modify surface characteristics. Surface roughness measurements showed a substantial reduction after chemical smoothing, with values decreasing from an initial range of 13.17 ± 0.21–15.87 ± 0.23 µm to 4.01 ± 0.18–7.35 ± 0.16 µm, corresponding to an average decrease of approximately 50–72%. Dimensional deviation improved moderately, from 260–420 µm in the as-printed condition to 160–310 µm after post-processing, representing a reduction of about 20–38%. Mechanical testing revealed a consistent increase in UTS following chemical smoothing, with values improving from 30.24–40.30 ± 0.52 MPa to 33.97–47.94 ± 0.36 MPa, yielding an average increase of approximately 10–24%. Then, the experimental data were used for multi-objective optimization of the FFF process parameters, using a non-dominated sorting genetic algorithm (NSGA-II) implemented in Python 3.11, to identify best parameter combinations that provide a balanced surface quality, dimensional accuracy, and mechanical performance.

6 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan
EVEzhilmaran V
Ezhilmaran V
LRLalitha Radhakrishnan
Lalitha Radhakrishnan
MHMonaf MADHAT Hodhod
Monaf MADHAT Hodhod
SJSkander Jribi
Skander Jribi
Faseeulla Khan MohammadFaseeulla Khan Mohammad
Faseeulla Khan Mohammad
Selective laser sintering (SLS) enables the fabrication of polymer components with intricate geometries; however, surface roughness remains a concern that affects performance and quality. This study systematically examines the influence of build orientation (X, Y, Z) and part location (inner, middle, outer) on surface roughness of Polyamide 12 (PA12) components. The results show that components built in the Y orientation and placed in the inner chamber exhibited the lowest surface roughness (Sa = 9.88 ± 0.16 µm). In contrast, Z-oriented components at the outer edge showed the highest (Sa = 11.49 ± 0.27 µm), indicating a 10.13% variation. SEM analysis showed smoother morphology and reduced porosity in the inner regions, while DSC confirmed higher crystallinity in samples with improved finish. These findings highlight the role of thermal stability and spatial positioning within the build chamber in controlling surface characteristics, emphasizing the importance of orientation and placement strategies for improving the quality of PA12 components fabricated by SLS.


26 October 2026 in Progress in Additive Manufacturing
Verified
Journal Article
Closed access
PDF file
SKSaravanan Kasinathan
Saravanan Kasinathan
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan
LRLalitha Radhakrishnan
Lalitha Radhakrishnan
ATArunkumar Thirugnanasambandam
Arunkumar Thirugnanasambandam

30 August 2026 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
SKSaravanan Kasinathan
Saravanan Kasinathan
LRLalitha Radhakrishnan
Lalitha Radhakrishnan
HKHariharan Kuppusamy
Hariharan Kuppusamy
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan
SATHISHKUMAR NATESANSATHISHKUMAR NATESAN
SATHISHKUMAR NATESAN
AISI S7 tool steel finds application in aerospace, automotive, and tooling industries for its high toughness and impact resistance. Machining this material with acceptable quality remains challenging. This study investigates the influence of Wire Electrical Discharge Machining (WEDM) process parameters, including pulse–on time (T on ), pulse–off time (T off ), discharge voltage (V), and wire tension (WT), on the surface roughness of AISI S7 tool steel using a machine learning–assisted predictive framework. Experimental WEDM data were used to develop and evaluate regression models, namely Linear Regression, Lasso, Elastic Net, Polynomial Regression, Random Forest, XGBoost, LightGBM, Support Vector Regression, and Voting Regressor. Model performance was assessed using the determination coefficient ( R ²), root mean square error, and absolute error. The results revealed that pulse–on time was the most influential parameter affecting surface roughness, followed by pulse–off time and discharge voltage, whereas wire tension exhibited a comparatively lower effect. Among the evaluated models, LightGBM achieved the highest prediction accuracy, with a mean R ² of 0.968 ± 0.011, RMSE of 0.100, and MAE of 0.081 under 5–fold cross–validation. Bayesian optimization was employed to identify optimal conditions, and experimental validation confirmed close agreement between predicted and measured surface roughness values. Scanning electron microscopy analysis revealed WEDM surface features, including craters and re–solidified debris, supporting the machining trends. The study demonstrates that integrating machine learning and Bayesian optimization provides an effective approach for predicting and optimizing surface roughness in WEDM of AISI S7 tool steel. It is recommended that pulse–on time be carefully controlled to achieve improved surface quality and machining performance.