Monaf MADHAT Hodhod

Mr. Monaf MADHAT Hodhod

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
LSLokeshwaran Srinivasan
Lokeshwaran Srinivasan
EVEzhilmaran V
Ezhilmaran V
LRLalitha Radhakrishnan
Lalitha Radhakrishnan
MHMonaf MADHAT Hodhod
Monaf MADHAT Hodhod
SJSkander Jribi
Skander Jribi
Faseeulla Khan MohammadFaseeulla Khan Mohammad
Faseeulla Khan Mohammad
Selective laser sintering (SLS) enables the fabrication of polymer components with intricate geometries; however, surface roughness remains a concern that affects performance and quality. This study systematically examines the influence of build orientation (X, Y, Z) and part location (inner, middle, outer) on surface roughness of Polyamide 12 (PA12) components. The results show that components built in the Y orientation and placed in the inner chamber exhibited the lowest surface roughness (Sa = 9.88 ± 0.16 µm). In contrast, Z-oriented components at the outer edge showed the highest (Sa = 11.49 ± 0.27 µm), indicating a 10.13% variation. SEM analysis showed smoother morphology and reduced porosity in the inner regions, while DSC confirmed higher crystallinity in samples with improved finish. These findings highlight the role of thermal stability and spatial positioning within the build chamber in controlling surface characteristics, emphasizing the importance of orientation and placement strategies for improving the quality of PA12 components fabricated by SLS.

16 September 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
VTVisnu Kumar Tiwari
Visnu Kumar Tiwari
ZKZahid A. Khan
Zahid A. Khan
NGNamrata Gangil
Namrata Gangil
Faseeulla Khan MohammadFaseeulla Khan Mohammad
Faseeulla Khan Mohammad
MHMonaf MADHAT Hodhod
Monaf MADHAT Hodhod
ASArshad Noor Siddiquee
Arshad Noor Siddiquee
Silicon nitride (Si3N4) is a critical advanced ceramic used in high-performance applications, but its inherent hardness and brittleness make it difficult to machine. Conventional methods like rotary ultrasonic machining (RUM) often result in subsurface damage and limited efficiency. This paper introduces a novel process, chemically-assisted rotary ultrasonic workpiece machining (CRUWM), designed to overcome these challenges. The key innovation lies in imparting ultrasonic vibrations directly to the workpiece while using methanol as a chemically-active fluid. This configuration leverages the Rehbinder effect to induce an absorption-induced reduction in the material's strength at the machining interface, transitioning the material removal mechanism from pure brittle fracture to a more favourable ductile-brittle hybrid mode. The results demonstrate the superiority of the CRUWM process over conventional RUM. We achieved a 75.9% reduction in hole taper angle, a 34.3% decrease in surface roughness (Ra), a 29.9% reduction in cutting forces, and a remarkable 92.9% increase in the material removal rate (MRR). These findings present a cost-effective and highly efficient pathway for precision machining of silicon nitride and other hard-to-machine ceramics.