Lorenzo Da Valle

Mr. Lorenzo Da Valle

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
LVLorenzo Da Valle
Lorenzo Da Valle
ATAntonino Federico Maria Torre
Antonino Federico Maria Torre
FMFilippo Merli
Filippo Merli
Bogdan CernatBogdan Cernat
Bogdan Cernat
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
This study investigates the time-resolved aerodynamics in the cavity regions of a full-scale, high-speed, low-pressure turbine stage representative of geared turbofan engines. The turbine stage is tested in the von Karman Institute’s short-duration rotating facility at different purge rates (PR) injected through the upstream hub cavity. Spectra from the shroud and downstream hub cavity show perturbations linked to blade passing frequency and rotor speed. Asynchronous flow structures associated with ingress/egress mechanisms are observed in the rim seal of the purged cavity. At 0% PR, the ingress region extends to the entire rim seal, and pressure fluctuations are maximized. At 1% PR, the instability is suppressed and the cavity is sealed. At 0.5%, the rim-seal instability exhibits multiple peaks in the spectra, each corresponding to a state of the instability. Kelvin–Helmholtz instabilities are identified as trigger mechanisms. A novel technique based on the properties of the cross-power spectral density is developed to determine the speed and wavelength of the rotating structures, achieving higher precision than the commonly used cross-correlation method. Moreover, unlike the standard methodology, this approach allows researchers to calculate the structure characteristics for all the instability states. Spectral analysis at the turbine outlet shows that rim-seal-induced instabilities propagate into regions occupied by secondary flows. A methodology is proposed to quantify the magnitude of the induced fluctuations, showing that the interaction with secondary flows amplifies the instability at the stage outlet.

18 December 2023 in Journal of Turbomachinery
Verified
Journal Article
Open access
PDF file
ATAntonino Federico Maria Torre
Antonino Federico Maria Torre
FMFilippo Merli
Filippo Merli
LVLorenzo Da Valle
Lorenzo Da Valle
MPMarios Patinios
Marios Patinios
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
PLPintat Ludovic
Pintat Ludovic
This paper presents the commissioning of a newly designed High-Speed Low-Pressure Turbine (LPT) stage, operating at transonic exit Mach numbers and low Reynolds numbers, typical of modern geared turbofan (GTF) applications. The work falls within the scope of the Clean Sky 2 project SPLEEN (Secondary and Leakage Flow Effects in High-speed Low-pressure Turbines), which consists of an extensive experimental characterization of LPTs for GTFs. Geometries and measurements will constitute a valuable open-access database for the validation of simulation methods and data analysis tools. At first, the characteristics of the research turbine are illustrated. The LPT stage is designed with an equal number of stationary vanes and shrouded rotor blades. The upstream and downstream hub cavities are purged and feature engine-realistic rim seals. The nominal operating condition of the stage is reported, along with a set of off-design conditions, obtained by varying rotor speed and purge mass flows. The second part of the paper describes the substantial revamping of the CT3 large-scale compression tube at Von Karman Institute for Fluid Dynamics, traditionally employed for high-pressure turbine testing, now adapted to host a high-speed LPT stage. The third section is an overview of the time-averaged and fast-response instrumentation. The test article is heavily instrumented, to maximize the amount of acquired data, while minimizing the number of blowdown tests. The dataset for each operating conditions includes aerothermal measurements in the annulus flow, in the hub cavities and in the shroud labyrinth seal. In addition, this section presents the design of an in-house traversing system for continuous probe traversing during the test. Finally, the outcome of the commissioning phase is discussed, with particular emphasis on the operating conditions stability, as well as on the inlet and cavity injection uniformity. The commissioning of a traversing system for continuous probe traversing during the short-duration test is also discussed.

20 December 2024 in Journal of Turbomachinery
Verified
Journal Article
Closed access
PDF file
AHAlexandre Halby
Alexandre Halby
BCBora Orcun Cakir
Bora Orcun Cakir
LVLorenzo Da Valle
Lorenzo Da Valle
GLGustavo Lopes
Gustavo Lopes
MOMizuki Okada
Mizuki Okada
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
Qualitative and quantitative visualizations of transonic turbomachinery flows provide essential information on compressibility and Mach number effects on boundary layer development, shock-boundary layer interactions, and trailing edge flows. Background oriented Schlieren (BOS) is a relatively new optical technique that allows capturing unsteady density gradient fields through turbomachinery cascades and thus quantitative experimental data to validate transonic and supersonic blade designs. However, only very few experimental works in the open literature have successfully applied BOS to transonic turbine or compressor flows. The current study presents the application of BOS to a transonic low-pressure turbine cascade, the VKI SPLEEN C1 cascade for a range of Reynolds numbers (70,000–140,000) and transonic Mach numbers (0.90–1.00). The linear turbine cascade is tested at the von Karman Institute in the S-1/C high-speed wind tunnel. The test section is instrumented with different BOS optical setups to visualize the time-resolved density gradients through the turbine passage and at the trailing edge plane with dedicated field of views. The BOS images are processed using the classical cross-correlation algorithm, and the optical flow approach, recently introduced in BOS applications to gain spatial resolution and increased sensitivity. Steady-state density gradients of the cascade flow characterize the airfoil boundary layers, wakes, and shock waves. The results from the two data reduction methods are assessed and compared against available RANS CFD predictions. Time-resolved measurements reveal the low-frequency motion of weak shock waves generated in the blade passage using proper orthogonal decomposition (POD) and spectra analysis.

9 April 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
LVLorenzo Da Valle
Lorenzo Da Valle
Bogdan CernatBogdan Cernat
Bogdan Cernat
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
As designers push engine efficiency closer to thermodynamic limits, the analysis of flow instabilities developed in High-Pressure Turbine (HPT) is crucial to minimizing aerodynamic losses and optimizing secondary air systems. Purge flow, while essential for protecting turbine components from thermal stress, significantly impacts the overall efficiency of the engine and is strictly connected to cavity modes and rim-seal instabilities. This paper presents an experimental investigation of these instabilities in an HPT stage, tested at engine-representative flow conditions in the short-duration turbine rig of the von Karman Institute. As operating conditions significantly influence instability behavior, this study provides valuable insight for future turbine design. Fast-response pressure measurements reveal asynchronous flow instabilities linked to ingress-egress mechanisms, with intensities modulated by the Purge Rate (PR). The maximum strength is reached at PR=1.0%, with comparable intensities persisting for higher rates. For lower PRs, the instability diminishes as the cavity becomes unsealed. An analysis based on the cross-power spectral density is applied to quantify the characteristics of the rotating instabilities. The speed of the asynchronous structures exhibits minimal sensitivity to the PR, approximately 65% of the rotor speed. In contrast, the structures length scale shows considerable variation, ranging from 11-12 lobes at PR=1.0%, to 14 lobes for PR=1.74%. The frequency domain analysis reveals a complex modulation of these instabilities and suggests a potential correlation with low engine-order fluctuations.

22 October 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
LVLorenzo Da Valle
Lorenzo Da Valle
ATAntonino Federico Maria Torre
Antonino Federico Maria Torre
FMFilippo Merli
Filippo Merli
Bogdan CernatBogdan Cernat
Bogdan Cernat
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
This study investigates the time-resolved aerodynamics in the cavity regions of a full-scale, high-speed low-pressure turbine stage representative of geared turbofan engines. The turbine stage is tested in the von Karman Institute’s short-duration rotating facility at different purge rates (PR) injected through the upstream hub cavity. Spectra from the shroud and downstream hub cavity show perturbations linked to blade passing frequency and rotor speed. Asynchronous flow structures associated with ingress/egress mechanisms are observed in the rim seal of the purged cavity. At 0% PR, the ingress region extends to the entire rim seal, and pressure fluctuations are maximized. At 1% PR, the instability is suppressed and the cavity sealed. At 0.5%, the rim-seal instability exhibits multiple peaks in the spectra, each corresponding to a state of the instability. Kelvin-Helmholtz instabilities are identified as trigger mechanisms. A novel technique, based on the properties of the cross-power spectral density, is developed to determine speed and wavelength of the rotating structures, achieving higher precision than the commonly used cross-correlation method. Moreover, unlike the standard methodology, this approach allows to calculate the structure characteristics for all the instability states. Spectral analysis at the turbine outlet shows that rim-seal-induced instabilities propagate into regions occupied by secondary flows. A methodology is proposed to quantify the magnitude of the induced fluctuations, showing that the interaction with secondary flows amplifies the instability at the stage outlet.

LVLorenzo Da Valle
Lorenzo Da Valle
Bogdan CernatBogdan Cernat
Bogdan Cernat
Sergio LavagnoliSergio Lavagnoli
Sergio Lavagnoli
As designers push engine efficiency closer to thermodynamic limits, the analysis of flow instabilities developed in a high-pressure turbine (HPT) is crucial to minimizing aerodynamic losses and optimizing secondary air systems. Purge flow, while essential for protecting turbine components from thermal stress, significantly impacts the overall efficiency of the engine and is strictly connected to cavity modes and rim-seal instabilities. This paper presents an experimental investigation of these instabilities in an HPT stage, tested under engine-representative flow conditions in the short-duration turbine rig of the von Karman Institute. As operating conditions significantly influence instability behavior, this study provides valuable insight for future turbine design. Fast-response pressure measurements reveal asynchronous flow instabilities linked to ingress–egress mechanisms, with intensities modulated by the purge rate (PR). The maximum strength is reached at PR = 1.0%, with comparable intensities persisting for higher rates. For lower PRs, the instability diminishes as the cavity becomes unsealed. An analysis based on the cross-power spectral density is applied to quantify the characteristics of the rotating instabilities. The speed of the asynchronous structures exhibits minimal sensitivity to the PR, approximately 65% of the rotor speed. In contrast, the structures’ length scale shows considerable variation, ranging from 11–12 lobes at PR = 1.0% to 14 lobes for PR = 1.74%. The frequency domain analysis reveals a complex modulation of these instabilities and suggests a potential correlation with low-engine-order fluctuations.