Water-based drilling fluids (WBDF) are often used over oil-based drilling fluids due to economic reasons and environmental regulations. Bentonite-free WBDF is preferred to aid in the reduction of formation damage. In many cases, this WBDF is formulated with xanthan gum. The performance of drilling operations is mainly affected by the drilling fluid formulation. The complex interactions among polymer concentration, thermal, and shear histories influence the rheological behavior of drilling fluids. The present study aims to analyze the effects of xanthan gum concentration on the rheological behavior of water-based drilling fluids. The experimental results performed in rotational rheometers revealed a relationship between concentration, yield stress, and thixotropic phenomena. The increase in xanthan gum concentration not only enhances the stability of the drilling fluid, allowing for more prolonged process interruptions without risking the fluid degradation but also improves the thermal stability of the sample. These findings show that the concentration of xanthan gum improves water-based drilling fluids' rheological and thermal stability.
The present study examines the impact of slip in Carbopol solutions during the restart flow in pipelines utilizing in situ visualization techniques. Rheological tests were conducted using smooth and hatched parallel plate geometries to obtain the rheological characteristics of the solutions. The behavior of the solutions in the creep tests is compared with those in the experimental unit. Three flow regimes were identified through rheological and experimental setup tests: non-flow, slip, and yielded. The slip regime allowed the establishment of a slip static yield stress value, indicating significant deformation states, and a restart pressure decrease of about 61% when compared to the static yield stress. The flow dynamics under the wall slip effect is captured by velocity profiles, velocity contour maps and velocity gradient. Transient correlations of the scaling law type were determined, with wall slip in proportion to the velocity gradient and wall shear stress. Additionally, the concentration of viscoplastic material in the solution increased the scaling law index. This research seeks to provide valuable findings by quantifying the effects of apparent wall slip through in situ measurements. Such insights are crucial for designing and managing pipeline transport systems that handle yield stress fluids, applicable across various industries including cosmetics, food processing, and the production of waxy oils.
Drilling fluids are essential for maintaining cutting suspension during drilling, exhibiting gel-like behavior at rest and liquid-like behavior under shearing. These fluids display shear-thinning behavior, yield stress, and thixotropy. This study investigates the impact of aging time on stress overshoot and the deformation required to disrupt the gelled structure of water-based and synthetic-based drilling fluids. Flow start-up tests were conducted using a rotational rheometer at 25 °C and atmospheric pressure. The results show that aging time significantly affects both stress overshoot and the shear strain needed to disrupt the gelled structure. Longer aging times reduce the strain required to break the structure, indicating a correlation between aging time and stress overshoot. The fitted model strongly correlates with the experimental data, providing valuable insights for the planning and simulation of offshore drilling wells, primarily in well stability.