This paper presents a multiphysics modeling of a switched reluctance motor (SRM) to simulate the acoustic radiation of the electrical machine. The proposed method uses a 2-D finite-element model of the motor to simulate its magnetic properties and a multiphysics mechatronic model of the motor and controls to simulate operating conditions. Magnetic forces on the stator are calculated using finite-element analysis and are used as the excitation on a forced response analysis that contains a finite-element model of the motor stator structure. Finally, sound power levels are calculated using the boundary element method. Simulation results of the model are shown and compared with experimental measurements for a four-phase 8/6 SRM.

The main purpose of this paper is to study the attenuation of the jump phenomena associated with the Sommerfeld Effect introduced by the nonlinearities of a magnetic rheological damper (MRD) in a non-ideal vibrational system, excited by a DC motor modeled as limited power source. Numerical simulations of the nonlinear vibrations of the system are carried out for different values of the MRD control parameter in order to show the amplitude reduction of the vibrations close to the system resonance introduced by the nonlinear damping effect of the MR system.

Piezoelectric shunt damping is a well-known technique to damp mechanical vibrations of a structure, using a piezoelectric transducer to convert mechanical vibration energy into electrical energy, which is dissipated in an electrical resistance. Resonant shunts consisting of a resistance and an inductance connected to a piezoelectric transducer are used to damp structural vibrations in narrow frequency bands, but their performance is very sensitive to variations in structural modal frequencies and transducer capacitance. In order to overcome this drawback, a piezoelectric shunt damping technique with improved performance and robustness is presented in this paper. The design of the adaptive circuit considers the variation of the host structure's natural frequency as a project parameter. This paper describes an adaptive resonant piezoelectric vibration absorber enhanced by a synthetic negative capacitance applied to a shell structure. The resonant shunt circuit autonomously adapts its inductance value by comparing the phase difference of the vibration velocity and the current flowing through the shunt circuit. Moreover, a synthetic negative capacitance is added to the shunt circuit to enhance the vibration attenuation provided by the piezoelectric absorber. The circuitry is implemented using analog components. Validation of the proposed method is done by bonding the piezoelectric absorber on a free-formed metallic shell.