This paper implements a practical interval type-2 fuzzy self-tuning (IT2FST) of optimal PID (OPID) controller to servo permanent magnet synchronous motor (SPMSM). The proposed method IT2FST updates the OPID controller gains in an online manner to drive the SPMSM with better speed response during variable load and parameter uncertainty occurrence. In this work, the industrial SPMSM system comprises three-phase PMSM with internal break, drive and mechanical parts. Due to the incomplete real information of the SPMSM, nonlinear least square algorithm has been utilized for its model identification. A comparative analysis in a real time of the SPMSM with an OPID, type-1 fuzzy self-tuning and IT2FST for OPID controllers under the influence of parameter uncertainties and external load disturbances has been carried out. The real-time practical implementation results illustrated that the proposed IT2FST of OPID controller gives a simple opportunity to enhance the speed performance of the SPMSM than the other controllers.
This paper compares between different techniques of self-tuning FOPID control for Brushless DC motor. The aim from this comparison discovering the sensitive FOPID controller parameters, which will give better performance when it will be tuned online. The FOPID control contains five parameters, the fuzzy logic control will be used to tune the FOPID controller parameters through different techniques. The first technique will be tuned the proportional, integral and derivative gains only, while in the second technique will be adapted the fractional order integral and derivative gains only. The third technique will be modified the five parameters of FOPID control simultaneously online. The presented simulation results illustrate that the second technique of self-tuning FOPID control is more robustness respect to other techniques.
DC motors are simple and controllable, making them a popular choice for various applications. However, the speed and load characteristics of DC motors can change, making it difficult to control them effectively. This paper proposes an optimum PID controller with fuzzy self-tuning for DC servo motors. The controller uses two steps to adjust the PID gains: The ACS algorithm is employed to identify the optimal PID gains in the first step. A fuzzy logic (FLC) controller is employed in the second stage to further fine-tune the gains. The FLC considers two cost functions: the first function is the sum of the squares of the error between the controlled output and reference input. The second function is a mathematical expression that specifies the required characteristics of the system response. The fuzzy self-tune then uses a set of rules to adjust the PID gains in response to changes in the system. The rules are based on the two cost functions designed to maintain the optimum PID gains for various operating settings. The outcomes of the two functions are: Kp = 5.2381, Ki = 7.0427, and Kd = 0.49468, with rising time = 0.2503, overshoot = 2.5079, and settling time = 10.4824 in the first cost function. The second cost function outcomes are Kp = 8.1381; Ki = 8.6427; and Kd = 0.49468. The FST-PID controller's performance is evaluated using Matlab-Simulink. The proposed controller was tested on a DC servo motor, and the results showed good performance in both steady-state and transient responses. The controller also maintained the optimum PID gains in the event of changes or disturbances. So, the motor's speed can effectively control under a variety of conditions.
1 December 2017 in International Journal of Power Electronics and Drive Systems (IJPEDS)
In this paper, a combination ANN/Fuzzy technique is used to design a Novel Fuzzy Single Neuron PID (NFSNPID) controller to achieve high performance brushless DC motor. The design steps include two parts. The first part uses the genetic algorithm (GA) to find the optimum parameters of Single Neuron PID (SNPID) controller, while the former deals with the design of fuzzy logic control to update the weights of SNPID control online. To demonstrate the designed controller effectiveness, a comparative study is made with between the NFSNPID, Conventional Fuzzy Single Neuron PID CFSNPID and SNPID. All controllers were used to drive, separately, the brushless DC motor against the sudden change of load and operating speed. The performed simulations show better results that motivate for further investigations.
1 October 2020 in International Journal of Electrical and Computer Engineering (IJECE)
This paper presents a new technique for a Takagi-Sugeno (TS) fuzzy parallels distribution compensation-PID'S (TSF-PDC-PID'S) to improve the performance of Egyptian load frequency control (ELFC). In this technique, the inputs to a TS Fuzzy model are the parameters of the change of operating points. The TS Fuzzy model can definite the suitable PID control for a certain operating point. The parameters of PID'S controllers are obtained by ant colony optimization (ACO) technique in each operating point based on an effective cost function. The system controlled by the proposed TSF-PDC-PID’S is investigated under different types of disturbances, uncertainty and parameters variations. The simulation results ensure that the TSF-PDC-PID'S can update the suitable PID controller at several operating points so, it has a good dynamic response under many types of disturbances compared to fixed Optimal PID controller.