One of the fastest-growing renewable energy sources is solar energy. A strategic step for a well-performing solar project is site identification. The evaluation of site-suitability is a complex task, where multiple qualitative and quantitative criteria, inherent to the territory, are involved. In this study, a GIS-based multi-criteria decision-making (MCDM) methodology for site-suitability evaluation in the development of solar farms (DSF) is presented. Two scenarios, the ranking method (RM) and the Analytical Hierarchy Process (AHP), each representing a different weighting approach, were tested. A case study was performed for the Desert of Chihuahua, Mexico, a region with the potential to provide a significant portion of the country’s energy demand. The RM was more stringent and identified less area with high suitability (1237 km2) compared to the AHP (4983 km2). Given its flexibility in assigning weights, the AHP is considered to have greater potential in identifying site-suitability levels. The final suitability maps of the AHP showed the northern part of the study region to have high suitability for the DSF. Thus, sites in this area could be used for the construction of solar energy projects in the future. This methodology provides a useful tool for land-use planning based on its suitability level.
Soil erosion is considered one of the main degradation processes in ecosystems located in developing countries. In northern Mexico, one of the most important hydrological regions is the Conchos River Basin (CRB) due to its utilization as a runoff source. However, the CRB is subjected to significant erosion processes due to natural and anthropogenic causes. Thus, classifying the CRB’s watersheds based on their erosion susceptibility is of great importance. This study classified and then prioritized the 31 watersheds composing the CRB. For that, multivariate techniques such as principal component analysis (PCA), group analysis (GA), and the ranking methodology known as compound parameter (Cp) were used. After a correlation analysis, the values of 26 from 33 geomorphometric parameters estimated from each watershed served for the evaluation. The PCA defined linear-type parameters as the main source of variability among the watersheds. The GA and the Cp were effective for grouping the watersheds in five groups, and provided the information for the spatial analysis. The GA methodology best classified the watersheds based on the variance of their parameters. The group with the highest prioritization and erosion susceptibility included watersheds RH24Lf, RH24Lb, RH24Nc, and RH24Jb. These watersheds are potential candidates for the implementation of soil conservation practices.
This study developed a GIS-based framework for the zoning of land suitability for grassland conservation (LSGC) in the Central Valleys of Chihuahua, México. For that, a Geographic Information Systems (GIS)-based multicriteria evaluation techniques with weighted overlay (MCE-WO), and a fragmentation analysis were performed. The framework for LSGC consisted in the development of four scenarios: Nonintensive Agriculture, Intensive Agriculture, Urban, and Rural. The LSGC classes defined with the MCE-WO technique were: Very high, High, Moderate, Low, and Very low land suitability. Results showed that the zone with a high suitability covered the largest area in the four scenarios with a surface of 44,264 km2. The zones with low and very low suitability were concentrated mainly in the central region of the study area. At the landscape level, fragmentation of LSGC showed the Nonintensive Agriculture and the Rural scenarios with the highest Number of patches (54,640 and 46,210, respectively). The fragmentation of LSGC, under the scenarios evaluated, was mainly due to land opening for agriculture and to the influence of rural communities. The integration of GIS with MCE-WO is useful and effective for the evaluation of LSGC. This tool can provide a solid source of information for decision-makers regarding planning of land use to mitigate grasslands degradation.
1 February 2017 in Revista Internacional de Contaminación Ambiental
TiO2 nanoparticles (TiO2-NPs) have a wide range of industrial applications (paintings, sunscreens, food and cosmetics) and is one of the most intensively used nanomaterials worldwide. Leaching from commercial products TiO2-NPs are predicted to significantly accumulate in wastewater sludges, which are then often used as soil amendment. In this work, sludge samples from four wastewater treatment plants of the Chihuahua State in Mexico were obtained during spring and summer (2017). A comprehensive characterization study was performed by X-ray based (laboratory and synchrotron) techniques and electron microscopy. Ti was detected in all sludge samples (1810–2760 mg/kg) mainly as TiO2 particles ranging from 40 nm up to hundreds of nm. Micro-XANES data was analyzed by principal component analysis and linear combination fitting enabling the identification of three predominant Ti species: anatase, rutile and ilmenite. Micro-XANES from the smaller Ti particles was predominantly anatase (68% + 32% rutile), suggesting these TiO2-NPs originate from paintings and cosmetics. TEM imaging confirmed the presence of nanoscale Ti with smooth surface morphologies resembling engineered TiO2-NPs. The size and crystalline phase of TiO2-NPs in the sludge from this region suggest increased reactivity and potential toxicity to agro-systems. Further studies should be dedicated to evaluating this.
26 November 2013 in Environmental Progress & Sustainable Energy