Wound healing is a complex process involving stages such as hemostasis, inflammation, proliferation, and remodeling. In this context, polymers are useful materials for wound treatment. This research used the Casting method to prepare films from 2% polyvinylpyrrolidone (PVP) gels. Subsequently, PVP films were grafted with maleic acid (MA) (PVP-g-PAM) to load naringin (NA) and silver nanoparticles (AgNPs) in order to obtain a material with pH responsiveness and antibacterial properties. The modified PVP-g-PAM films were prepared using gamma-ray irradiation through a pre-irradiation oxidative method at a dose rate of 13.7 kGy h−1, doses ranging from 10 to 25 kGy, and reaction times from 50 to 80 min in a bath of water, all samples at 50 °C, and a fixed monomer concentration of 15% (w/v) MA in THF. The conditions that yielded the highest percentage of grafting were 20 kGy and 60 min. NA was loaded at a fixed concentration of 5%. Data release showed that the films follow the Korsmeyer-Peppas kinetic model. Synthesis of AgNPs was performed by γ-ray irradiation–reduction (10 and 30 kGy), using PVP as a stabilizer. AgNPs showed in vitro effectiveness against E. coli and S. aureus. Films were characterized by FTIR-ATR, TGA, DSC, mechanical properties, swelling index, and contact angle. Further studies must be implemented; however, the results up now suggest that PVP-g-PAM loaded with NA and AgNPs can be useful as a potential wound dressing.
Poly(vinylpyrrolidone) hydrogels net(PVP) were synthesized by gamma radiation at a dose rate of 11.8 kGy h−1 and subsequently functionalized with maleic acid (MA) via radiation-induced grafting using the direct method to obtain pH-responsive hydrogels for the loading and controlled release of bioactive compounds. Under the selected conditions, MA grafting reached approximately 18%. The obtained hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR-ATR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and swelling studies. The results confirmed the successful incorporation of MA into the hydrogel network and demonstrated that grafting imparted pH-responsive behavior due to the ionization of carboxylic acid groups, yielding two critical pH values at 4.4 and 6.0. Loading and release studies using naringin and benzalkonium chloride showed that the grafted hydrogels exhibited enhanced loading capacity and sustained release profiles governed by the hydrogel network and by interactions between the loaded compounds and the carboxylic groups from MA. Furthermore, hydrogels loaded with antimicrobial agents effectively inhibited the growth of Escherichia coli and Staphylococcus aureus. These findings demonstrate that gamma radiation-induced MA grafting is an effective strategy for developing pH-responsive PVP hydrogels with potential applications as multifunctional wound dressing materials.
In this research, silicone films (SR) were modified by grafting ethylene glycol dicyclopentenyl ether acrylate (EGDEA) through gamma-ray irradiation using both direct and pre-irradiation methods at a dose rate of 10.8 kGy/h, with doses ranging from 10 to 50 kGy. Several techniques, including TGA, DSC, contact angle measurement, mechanical testing, swelling, and FTIR, confirmed the grafting of EGDEA onto SR films. The highest grafting efficiency was achieved at 50 kGy using the direct method. Subsequently, SR-g-EGDEA films were loaded with silver for microbial testing, showing promising results for potential biomedical applications.
This research involved functionalizing polypropylene (PP) films with 2-(Diethylamino)ethyl methacrylate (DEAEM), a monomer that responds to both temperature and pH. For this, Gamma-ray irradiation was used at a dose rate of 11.75 kGy h−1, doses ranging from 30 to 100 kGy, and a monomer concentration of 50% (v/v). The modified films (PP-g-DEAEM) were characterized by thermal analysis, FTIR-ATR, swelling, and contact angle. Confirming that the films were successfully grafted with DEAEM, improving the wettability of the pristine PP films, with a critical pH of 5.6 and a temperature response at 45.7 °C. Subsequently, the films were subjected to ciprofloxacin loading and release, and their in vitro efficacy against the E. coli strain was assessed using the Kirby-Bauer method. This work suggests potential applications in biomedical devices; however, further studies are needed.