Ester dielectric liquids were found to overcome mineral oils in terms of flash point and environmental aspects. We study Ester oils behavior through partial discharge inception voltage (PDIV) and compare it with mineral oil. We conduct experiments on two types of oil, ester oil (fatty acid ester made from vegetable oil) and mineral oil so that the comparison can be made. We use the Needle-To-Plane electrodes configuration to get the PDIV and breakdown voltage (BDV). The device we made to test PD is a vertical acrylic tube with a high voltage electrode at top and a ground electrode at bottom and filled with the tested oil, we change the gap length for different readings for both types of oil. The natural ester oil is showing a good potential for medium voltage transformer insulation with slightly higher PDIV than mineral oil.
Non-obstructive azoospermia (NOA) is a severe male infertility condition characterized by extremely low or absent sperm production. In microdissection testicular sperm extraction (Micro-TESE) procedures for NOA, embryologists must manually search through testicular tissue under a microscope for rare sperm, a process that can take 1.8–7.5 h and impose significant fatigue and burden. This paper presents an augmented reality (AR) microscope system with AI-based image analysis to accelerate sperm retrieval in Micro-TESE. The proposed system integrates a deep learning model (YOLOv5) for real-time sperm detection in microscope images, a multi-object tracker (DeepSORT) for continuous sperm tracking, and a velocity calculation module for sperm motility analysis. Detected sperm positions and motility metrics are overlaid in the microscope’s eyepiece view via a microdisplay, providing immediate visual guidance to the embryologist. In experiments on seminiferous tubule sample images, the YOLOv5 model achieved a precision of 0.81 and recall of 0.52, outperforming previous classical methods in accuracy and speed. The AR interface allowed an operator to find sperm faster, roughly doubling the sperm detection rate (66.9% vs. 30.8%). These results demonstrate that the AR microscope system can significantly aid embryologists by highlighting sperm in real time and potentially shorten Micro-TESE procedure times. This application of AR and AI in sperm retrieval shows promise for improving outcomes in assisted reproductive technology.
Purpose: Non-obstructive azoospermia (NOA) presents major challenges in assisted reproductive technology (ART) due to the extremely low number of viable sperm within testicular tissue. In Micro-TESE procedures, embryologists manually search for sperm under DIC microscopy—a slow, labor-intensive process. We aim to streamline this process with an efficient computational detection tool. Methods: We present SD-CLIP (Sperm Detection using Classical Image Processing), a lightweight, real-time algorithm that simulates sperm structure detection from unstained DIC images. The model first identifies convex sperm head candidates based on shape and width using edge gradients, then confirms the presence of a tail via principal component analysis (PCA) of pixel clusters. Results: Compared to the MB-LBP + AKAZE method, SD-CLIP improved processing speed by 4× and achieved a 3.8× higher posterior probability ratio, making detected sperm candidates significantly more reliable. Evaluation was performed on both human Micro-TESE and mouse testis images, demonstrating robustness in low-sperm environments. Conclusions: SD-CLIP simulates a domain-specific image interpretation model that identifies sperm morphology with high specificity. It requires minimal computational resources, supports real-time integration, and could be extended to automated sperm extraction systems. This tool has clinical value for accelerating Micro-TESE and increasing success rates in ART for NOA patients.
6 October 2026 in Cell Therapy & Engineering Connect
Since its introduction in 1992, intracytoplasmic sperm injection (ICSI) has gained significance in assisted reproduction. In certain instances of male infertility, fertilization is made possible by the microsurgical insertion of a single sperm cell straight into the cytoplasm of an oocyte. These days, the majority of in vitro fertilizations worldwide use ICSI, which is carried out manually by qualified embryologists. However, automation is encouraged to increase overall uniformity and efficiency because manual ICSI is labor-intensive and subject to inconsistency depending on the skill of the em-bryologist. The state of the art in ICSI automation is outlined in this article, which includes computer vision-guided control mechanisms, robotic micromanipulation systems, and artificial intelligence (AI) for sperm selection. We dis-cuss the technical advancements that allow robots to perform key ICSI steps with high precision, such as automated sperm detection, sperm capture, oocyte detection, oocyte fixing, and injection using microneedles and piezo-electric actuators. Emerging AI algorithms that evaluate and select optimal sperm in real time and machine learning imaging systems for oocyte and embryo assessment are also examined. We present current outcomes from studies of automated ICSI, including the first healthy births achieved with a robotic ICSI platform, and compare technical and clinical results to conventional manual ICSI. Finally, we explore future directions and challenges, like integrating multiple lab procedures into an autonomous workflow, safety concerns, regulatory, and ethical considerations. Automation in ICSI has begun to show potential promise in improving reproductive technology, which leads to a new era of innovation in embryology labs.