Marah Baddour

Ms. Marah Baddour

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
MBMarah Baddour
Marah Baddour
RGRuth Garcia
Ruth Garcia
PRPablo Reyes
Pablo Reyes
Dagmar R. D'hoogeDagmar R. D'hooge
Dagmar R. D'hooge
Ludwig CardonLudwig Cardon
Ludwig Cardon
MEMariya Edeleva
Mariya Edeleva
Continuous carbon fiber (cCF)-based 3D-printed polymer composites are known for their excellent flexural properties; however, the optimization of the overall process is still desired, depending on the material types involved. Here, the improved manufacturing of cCF-based composites is reported, considering virgin polyamide (PA) and postindustrial waste polypropylene (PP), and the parameters affecting the material properties are evaluated. Firstly, the prepregnation technique was optimized to manufacture cCF polymer filaments with various fiber-to-polymer ratios. Secondly, the fused filament fabrication (FFF) technique was optimized. It was observed that the layer height needs to be sufficiently low for proper interlayer adhesion. The influence of the printing temperature is more complicated, with filaments characterized by a lower fiber-to-polymer ratio requiring a higher nozzle diameter and higher temperatures for efficient printing; and for lower diameters, the best flexural properties are observed for parts printed at lower temperatures, maintaining a high interspace distance. Plasma treatment of the cCF was also explored, as was annealing of the produced parts to enhance the flexural properties, the latter being specifically interesting for the PP-based composite due to a lower wetting caused by a higher viscosity, despite supportive interfacial interactions. Eventually, overall guidelines were formulated for the successful production of cCF-based composites.

Verified
Journal Article
Open access
PDF file
MBMarah Baddour
Marah Baddour
CFChiara Fiorillo
Chiara Fiorillo
LTLynn Trossaert
Lynn Trossaert
AVAnnabelle Verberckmoes
Annabelle Verberckmoes
AGArthur Ghekiere
Arthur Ghekiere
MEMariya Edeleva
Mariya Edeleva
Short carbon fiber (sCF)-based polymer composite parts enable one to increase in the material property range for additive manufacturing (AM) applications. However, room for technical and material improvement is still possible, bearing in mind that the commonly used fused filament fabrication (FFF) technique is prone to an extra filament-making step. Here, we compare FFF with direct pellet additive manufacturing (DPAM) for sCF-based composites, taking into account degradation reactions, print quality, and energy usage. On top of that, the matrix is based on industrial waste polymers (recycled polycarbonate blended with acrylonitrile butadiene styrene polymer and recycled propylene), additives are explored, and the printing settings are optimized, benefiting from molecular, rheological, thermal, morphological, and material property analyses. Despite this, DPAM resulted in a rougher surface finish compared to FFF and can be seen as a faster printing technique that reduces energy consumption and molecular degradation. The findings help formulate guidelines for the successful DPAM and FFF of sCF-based composite materials in view of better market appreciation.