Solution-processed metal oxides have been investigated as an alternative to vacuum-based oxides to implement low-cost, high-performance electronic devices on flexible transparent substrates. However, their electrical properties need to be enhanced to apply at industrial scale. Amorphous indium-gallium-zinc oxide (a-IGZO) is the most-used transparent semiconductor metal oxide as an active channel layer in thin-film transistors (TFTs), due to its superior electrical properties. The present work evaluates the influence of composition, thickness and ageing on the electrical properties of solution a-IGZO TFTs, using solution combustion synthesis method, with urea as fuel. After optimizing the semiconductor properties, low-voltage TFTs were obtained by implementing a back-surface passivated 3-layer In:Ga:Zn 3:1:1 with a solution-processed high-к dielectric; AlO_x. The devices show saturation mobility of 3.2 cm² V⁻¹ s⁻¹, I_On/I_Off of 10⁶, SS of 73 mV dec⁻¹ and V_On of 0.18 V, thus demonstrating promising features for low-cost circuit applications.

Neuromorphic computing has been gaining momentum for the past decades and has been appointed as the replacer of the outworn technology in conventional computing systems. Artificial neural networks (ANNs) can be composed by memristor crossbars in hardware and perform in-memory computing and storage, in a power, cost and area efficient way. In optoelectronic memristors (OEMs), resistive switching (RS) can be controlled by both optical and electronic signals. Using light as synaptic weigh modulator provides a high-speed non-destructive method, not dependent on electrical wires, that solves crosstalk issues. In particular, in artificial visual systems, OEMs can act as the artificial retina and combine optical sensing and high-level image processing. Therefore, several efforts have been made by the scientific community into developing OEMs that can meet the demands of each specific application. In this review, the recent advances in inorganic OEMs are summarized and discussed. The engineering of the device structure provides the means to manipulate RS performance and, thus, a comprehensive analysis is performed regarding the already proposed memristor materials structure and their specific characteristics. Moreover, their potential applications in logic gates, ANNs and, in more detail, on artificial visual systems are also assessed, taking into account the figures of merit described so far.

Neuromorphic computation based on resistive switching devices represents a relevant hardware alternative for artificial deep neural networks. For the highest accuracies on pattern recognition tasks, an analog, linear, and symmetric synaptic weight is essential. Moreover, the resistive switching devices should be integrated with the supporting electronics, such as thin-film transistors (TFTs), to solve crosstalk issues on the crossbar arrays. Here, an a-Indium-gallium-zinc-oxide (IGZO) memristor is proposed, with Mo and Ti/Mo as bottom and top contacts, with forming-free analog switching ability for an upcoming integration on crossbar arrays with a-IGZO TFTs for neuromorphic hardware systems. The development of a TFT compatible fabrication process is accomplished, which results in an a-IGZO memristor with a high stability and low cycle-to-cycle variability. The synaptic behavior through potentiation and depression tests using an identical spiking scheme is presented, and the modulation of the plasticity characteristics by applying non-identical spiking schemes is also demonstrated. The pattern recognition accuracy, using MNIST handwritten digits dataset, reveals a maximum of 91.82% accuracy, which is a promising result for crossbar implementation. The results displayed here reveal the potential of Mo/a-IGZO/Ti/Mo memristors for neuromorphic hardware.

Optoelectronic memristors based on amorphous oxide semiconductors (AOSs) are promising devices for the development of spiking neural network (SNN) hardware in neuromorphic vision sensors. In such devices, the conductance state can be controlled by both optical and electrical stimuli, while the typical persistent photoconductivity (PPC) of AOS materials can be used to emulate synaptic functions. However, due to the large band gap of these materials, sensitivity to visible light (red/green/blue) is difficult to accomplish, which hinders applications requiring color discrimination. In this work, we report a 4 μm² hydrogen-doped (H-doped) indium-gallium-zinc oxide (IGZO) optoelectronic memristor that emulates all of the important rules of SNNs such as short- to long-term memory transition (STM-LTM), paired-pulse facilitation (PPF), spike-time-dependent plasticity (STDP), and learning and forgetting capabilities. By the incorporation of hydrogen gas in the sputtering deposition of IGZO, visible sensitivity was achieved for green and blue wavelengths. Additionally, extremely high light/dark ratios of 179, 93, and 12 are demonstrated for wavelengths of 365, 405, and 505 nm, respectively, due to hydrogen-induced subgap states and device miniaturization. Therefore, the proposed device shows remarkable potential for integration with the pixel circuits of IGZO-based displays with extreme resolution for a true intelligent self-processing display.

Memristor crossbar arrays can compose the efficient hardware for artificial intelligent applications. However, the requirements for a linear and symmetric synaptic weight update and low cycle‐to‐cycle (C2C) and device‐to‐device variability as well as the sneak‐path current issue have been delaying its further development. This study reports on a thin‐film amorphous oxide‐based 4×4 1‐transistor 1‐memristor (1T1M) crossbar. The a‐IGZO crossbar is built on a flexible polyimide substrate, enabling IoT and wearable applications. In the novel framework, the thin‐film transistor and memristor are fabricated at the same level, with the same processing steps and sharing the same materials for all layers. The 1T1M cells show linear and symmetrical plasticity characteristic with low C2C variability. The memristor performs like an analog dot product engine and vector–matrix multiplications in the 4×4 crossbars is demonstrated experimentally, in which the sneak‐path current issue is successfully suppressed, resulting in a proof‐of‐concept for a cost‐effective, flexible artificial neural networks hardware.