Zinc plant leach residues (ZPLRs) contain significant amounts of metal compounds of lead (Pb), zinc (Zn), iron (Fe), etc., hence, they are considered as a secondary source of metals. On the other hand, ZPLRs are regarded as hazardous materials because they contain heavy metals that pollute the environment. Resources and environmental concerns of ZPLRs were addressed in this study by removing/recovering Pb and Zn using a concurrent dissolution and cementation technique. To cement the dissolved Pb and Zn in leaching pulp, zero-valent aluminum (ZVAl) was added during ZPLRs leaching in the hydrochloric (HCl)–sodium chloride (NaCl) solution. The resulting cemented metals were agglomerated and separated by sieving. Lead removal increased with increasing both NaCl and HCl concentrations. However, when ZVAl was added, significant Pb removal was achieved at a low concentration. Zinc was not cemented out of the pulp using ZVAl and its recovery from ZPLRs was dependent on the HCl concentration only. By applying a concurrent dissolution and cementation technique, both Pb and Zn were removed using a low concentration of NaCl, and most importantly Pb—the most toxic metal in ZPLRs—was captured and separated before the solid-liquid separation, hence, eliminating the need for extensive washing of the generated residues to remove the inherent residual solution.
Zinc plant leach residues (ZPLRs), particularly those produced using old technologies, have both economic importance as secondary raw materials and have environmental impacts because they contain hazardous heavy metals that pose risks to human health and the environment. Therefore, the extraction and recovery of these metals from ZPLRs has both economic and environmental benefits. In this study, we investigated the removal of lead (Pb) and zinc (Zn) from ZPLRs by alkaline (NaOH) leaching and the concurrent cementation of dissolved Pb and Zn using aluminum (Al) metal powder. The effects of the leaching time, NaOH concentration, solid-to-liquid ratio (S/L), and dosage of Al metal powder on the extraction of Pb and Zn were investigated. Pb and Zn removal efficiencies increased with increasing NaOH concentrations and decreasing S/Ls. The Pb and Zn removal efficiencies were 62.2% and 27.1%, respectively, when 2.5 g/50 mL (S/L) of ZPLRs were leached in a 3 M NaOH solution for 30 min. The extraction of Pb and Zn could be attributed to the partitioning of these metals in relatively more mobile phases—water-soluble, exchangeable, and carbonate phases—in ZPLRs. Around 100% of dissolved Pb and less than 2% of dissolved Zn were cemented in leaching pulp when Al metal powder was added. Minerals in the solid residues, particularly iron oxides minerals, were found to suppress the cementation of extracted Zn in leaching pulp, and when they were removed by filtration, Zn was recovered by Al metal powder via cementation.