Zafar Iqbal

Dr. Zafar Iqbal

Agricultural and Biological Engineering, University of Florida, Gainesville, Florida, USA
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2020 in Agriculture
Verified
Journal Article
Open access
PDF file
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Zafar IqbalZafar Iqbal
Zafar Iqbal
Mohammod AliMohammod Ali
Mohammod Ali
Milon ChowdhuryMilon Chowdhury
Milon Chowdhury
MKMd Shaha Nur Kabir
Md Shaha Nur Kabir
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
Pepper is one of the most vital agricultural products with high economic value, and pepper production needs to satisfy the growing worldwide population by introducing automatic seedling transplantation techniques. Optimal design and dimensioning of picking device components for an automatic pepper transplanter are crucial for efficient and effective seedling transplantation. Therefore, kinematic analysis, virtual model simulation, and validation testing of a prototype were conducted to propose a best-suited dimension for a clamp-type picking device. The proposed picking device mainly consisted of a manipulator with five grippers and a picking stand. To analyze the influence of design variables through kinematic analysis, 250- to 500-mm length combinations were considered to meet the trajectory requirements and suit the picking workspace. Virtual model simulation and high-speed photography tests were conducted to obtain the kinematic characteristics of the picking device. According to the kinematic analysis, a 350-mm picking stand and a 380-mm manipulator were selected within the range of the considered combinations. The maximum velocity and acceleration of the grippers were recorded as 1.1, 2.2 m/s and 1.3, 23.7 m/s2, along the x- and y-axes, respectively, for 30 to 90 rpm operating conditions. A suitable picking device dimension was identified and validated based on the suitability of the picking device working trajectory, velocity, and acceleration of the grippers, and no significant difference (p ≤ 0.05) occurred between the simulation and validation tests. This study indicated that the picking device under development would increase the pepper seedling picking accuracy and motion safety by reducing the operational time, gripper velocity, acceleration, and mechanical damage.

11 January 2021 in Machines
Verified
Journal Article
Open access
PDF file
Zafar IqbalZafar Iqbal
Zafar Iqbal
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Milon ChowdhuryMilon Chowdhury
Milon Chowdhury
SISumaiya Islam
Sumaiya Islam
TPTusan Park
Tusan Park
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
The development of an automatic walking-type pepper transplanter could be effective in improving the mechanization rate in pepper cultivation, where the dibbling mechanism plays a vital role and determines planting performance and efficiency. The objective of this research was to determine a suitable working speed for a gear-driven dibbling mechanism appropriate for a pepper transplanter, while considering agronomic transplanting requirements. The proposed dibbling mechanism consisted of two dibbling hoppers that simultaneously collected free-falling seedlings from the supply mechanism and dibbled them into soil. To enable the smooth collection and plantation of pepper seedlings, analysis was carried out via a mathematical working trajectory model of the dibbling mechanism, virtual prototype simulation, and validation tests, using a physical prototype. In the mathematical model analysis and simulation, a 300 mm/s forward speed of the transplanter and a 60 rpm rotational speed of the dibbling mechanism were preferable in terms of seedling uprightness and low mulch film damage. During the field test, transplanting was conducted at a 40 mm planting depth, using different forward speed levels. Seedlings were freely supplied to the hopper from a distance of 80 mm, and the success rate for deposition was 96.79%. A forward speed of 300 mm/s with transplanting speed of 120 seedlings/min was preferable in terms of achieving a high degree of seedling uprightness (90 ± 3.26), a low rate of misplanting (8.19%), a low damage area on mulch film (2341.95 ± 2.89 mm2), high uniformity of planting depth (39.74 ± 0.48 mm), and low power consumption (40.91 ± 0.97 W).

19 November 2020 in Machines
Verified
Journal Article
Open access
PDF file
Milon ChowdhuryMilon Chowdhury
Milon Chowdhury
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Zafar IqbalZafar Iqbal
Zafar Iqbal
SISumaiya Islam
Sumaiya Islam
DLDae-Hyun Lee
Dae-Hyun Lee
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
The overturning stability and vibration of upland crop machinery under development are important issues for analysis because farms for upland crops are usually uneven, which may cause work-related fatalities, and vibration affects user comfort and reduces the durability of components. In this study, the overturning stability and vibration of a tractor-mounted radish collector were investigated to ensure safety during radish collection. To analyze lateral stability, the center of gravity (CG) of the tractor-mounted radish collector system was calculated mathematically. Then, a simulation was performed to determine the lateral overturning angles at different folding positions of the radish conveyor belt and load conditions, and the results were validated through tests. Vibration sensors were used to measure the vibration levels and the power spectrum density (PSD) was obtained to check the cyclic apparatuses of the major frequencies. The load conditions, different conveyor speeds, and locations were considered as factors affecting the vibration levels. Considering the physical parameters of the tractor–collector system, the analytical overturning angle was 30.5°. The average overturning angle difference between the simulation and validation was 5°, and the difference between loaded and unloaded conditions was 2°. For 0, 45, and 90° folding positions of the conveyor belt, overturning angles increased and varied from 0.5 to 1°. The vibration level was greater under the unloaded conditions and increased with an increase in the conveyor speed. Vibrations under the loaded condition (0.37~0.48 ms−2) satisfied the ISO (International Organization for Standardization) standard (except the first conveyor belt). According to the PSD analysis, high magnitude peaks (>25 dB) appeared frequently in all directions, which indicates a high possibility of damage to the first conveyor belt. This study provides useful information for improving the safety and durability of agricultural machinery for uneven and sloped field conditions.

30 August 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Md Nasim RezaMd Nasim Reza
Md Nasim Reza
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Zafar IqbalZafar Iqbal
Zafar Iqbal
MKMd Shaha Nur Kabir
Md Shaha Nur Kabir
Milon ChowdhuryMilon Chowdhury
Milon Chowdhury
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
The monitoring and control of environmental conditions are crucial as they influence crop quality and yield in Chinese solar greenhouses (CSGs). The objectives of this study were to assess the spatial, temporal, and vertical variability of major environmental parameters in CSGs during winter and to provide greenhouse climate/microclimate characteristics in order to facilitate the monitoring and control of greenhouse environmental conditions. A wireless sensor network (WSN) was deployed in two CSGs: one with crops and one without. Sensors were placed at different locations inside and outside the greenhouses, and the air temperature, humidity, CO2 concentration, light intensity, solar radiation, and wind conditions were measured and analyzed. Significant variability in the spatial, temporal, and vertical distribution of environmental factors was observed in both greenhouses. The average minimum and maximum temperatures and humidity inside the CSG with crops were 9.96 °C (4:00 h) and 24.5 °C (12:00 h), and 32.6% (12:00 h) and 92.1% (5:00 h), respectively. The temperature difference was 2.2 °C between layers in the CSG without crops and 1.4 °C between layers in the CSG with crops. The CO2 concentration in the different layers inside the CSG with crops was highest at night. The average maximum light intensity inside the CSG with crops was 32,660.19 lx, 36,618.12 lx, and 40,660.48 lx (12:00 h to 13:00 h) in the bottom, middle, and top layers, respectively. Sensor positioning in the greenhouse was evaluated by considering the sensors’ data variability. The findings of this study could aid in the development of a better monitoring and control system for CSG’s microclimate during winter. More research is needed on greenhouse microclimate control systems based on this variability analysis, which could improve crop quality and yield in greenhouses.

3 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Zafar IqbalZafar Iqbal
Zafar Iqbal
Milon ChowdhuryMilon Chowdhury
Milon Chowdhury
Mohammod AliMohammod Ali
Mohammod Ali
KSKiraga Shafik
Kiraga Shafik
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
A seedling picking device is an essential component for an automatic transplanter to automatically convey the seedling to the dibbling part. It is necessary to find the appropriate material and dimensions for the picking device gears to avoid mechanical damage and increase their durability. Therefore, the objectives of this research were to analyze the stress of a picking device gear mechanism in order to select suitable materials and dimensions, and to predict the fatigue life by considering the damage level. The picking device gear shaft divided the input power into two categories, i.e., crank and cam gear sets. Finite element analysis simulation and American Gear Manufacturers Association standard stress analysis theory tests were conducted on both of the crank and cam gear sets for different materials and dimensions. A test bench was fabricated to collect the load (torque) data at different gear operating speeds. The torque data were analyzed using the load duration distribution method to observe the cyclic load patterns. The Palmgren–Miner cumulative damage rule was used to determine the damage level of the picking mechanism gears with respect to the operating speed. The desired lifespan of the transplanter was 255 h to meet the real field service life requirement. Predicted fatigue life range of the picking mechanism gears was recorded as from 436.65 to 4635.97 h, making it higher (by approximately 2 to 18 times) than the lifespan of the transplanter. According to the analyses, the “Steel Composite Material 420H carbon steel” material with a 5 mm face width gear was suitable to operate the picking device for a 10-year transplanter service life. The analysis of stress and fatigue presented in this study will guide the design of picking device gears with effective material properties to maintain the recommended service life of the pepper transplanter.

15 March 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Md Nafiul IslamMd Nafiul Islam
Md Nafiul Islam
Zafar IqbalZafar Iqbal
Zafar Iqbal
Mohammod AliMohammod Ali
Mohammod Ali
MGMd Ashrafuzzaman Gulandaz
Md Ashrafuzzaman Gulandaz
MKMd Shaha Nur Kabir
Md Shaha Nur Kabir
Sun-Ok ChungSun-Ok Chung
Sun-Ok Chung
Controlling humidity inside greenhouses is crucial for optimum plant growth and controlling physiological disorders and diseases. The humidity response and uniformity depend extensively on the evaluation of the dehumidifier. The objective of this research was to evaluate a low-powered suspension-type dehumidifier module in terms of humidity changes and spatial and vertical variability in a closed chamber and in a small greenhouse. A wireless sensor network including 27 sensor nodes was used to collect the data during the humidity changes from 80% to 70% and 90% to 70%. The humidity response results showed that the times required for dehumidification from 80% to 70% and 90% to 70% were 13.75 and 21.51 min, respectively, for the closed-chamber operation. Similarly, for the small greenhouse, 18 and 35 min were required to reduce the humidity levels from 80% to 70% and 90% to 70%, respectively. The spatial and variability results indicated that the changes in humidity at the rear and bottom layers were slower than those in the other layers of both experimental areas. The findings of this study would aid in the development of dehumidification strategies and sustainable agriculture for monitoring and controlling humidity in greenhouses using low-powered dehumidifiers.