Octocrylene is an organic sunscreen whose main action is to absorb UVB radiation and short UVA wavelengths; it is used in various cosmetic products in order to provide an adequate sun-protection factor or to protect the cosmetic formulations themselves from UV radiation. This filter is believed to be a possible endocrine disruptor and is also questioned due to its allergic and/or photoallergic potential. However, it continues to be widely used, and it has been found in various environments, not least those of swimming pools, where it is evidently released by consumers, to the point that it is now considered an emerging micropollutant. The present investigation presents the possible chemical fate of octocrylene in the typical chlorination conditions of wastewater or swimming pools. A total of 11 disinfection byproducts were identified, and 6 were identified for the first time, and separated by HPLC. These products were identified through careful mass spectrometry studies and 1D and 2D NMR experiments. A formation mechanism has been proposed that justifies the chemical structures of all of the compounds identified. The ecotoxicological assessment of octocrylene and their products was carried out by employing Phaeodactylum tricornutum, Brachionus plicatilis and Aliivibrio fischeri as bioindicators. The ecotoxicity results reveal that toxic byproducts might be generated during the oxidation process, increasing the potential risk to the marine environment.

The development of any commercial product should also be aimed at reducing the risk associated with it, according to the safe-by-design concept; that is, risk assessment should always be at the center of the design, and the impact on human and environmental health should be assessed and eliminated during the product development phase and not afterwards. Unfortunately, even today, most operators in any production sector implement the philosophy of “risk management” or rather of managing the problem when it occurs, using spot interventions instead of changing the approach. This argument is also valid in the production of solar filters, which have reached a satisfactory degree of efficiency in the face of a substantial underestimation of the risks associated with their possible environmental fate. In fact, solar filters have been found in bathing waters and their environmental fate may depend on various factors such as the pH of the water, the presence of organic material, metal ions and light, and, above all, the chemical agents used in the disinfection of the water itself. Thus, during disinfection processes, the generation of dozens of products with a lower molecular weight and generally of an aromatic nature has been tested, where some of them did not receive an exact structural definition and a precise evaluation of their precise toxicological profile. Therefore, it is interesting to draw a complete picture of organic sunscreens and of the byproducts obtained under different conditions and their related ecotoxicological profile.

Losartan, an angiotensin II receptor antagonist frequently detected in wastewater effluents, poses considerable risks to both aquatic ecosystems and human health. Seeking to address this challenge, advanced oxidation processes (AOPs) emerge as robust methodologies for the efficient elimination of such contaminants. In this study, the degradation of Losartan was investigated in the presence of activated peroxymonosulfate (PMS), leveraging ferrous iron as a catalyst to enhance the oxidation process. Utilizing advanced analytical techniques such as NMR and mass spectrometry, nine distinct byproducts were characterized. Notably, seven of these byproducts were identified for the first time, providing novel insights into the degradation pathway of Losartan. The study delved into the kinetics of the degradation process, assessing the degradation efficiency attained when employing the catalyst alone versus when using it in combination with PMS. The results revealed that Losartan degradation reached a significant level of 64%, underscoring the efficacy of PMS/Fe(II) AOP techniques as promising strategies for the removal of Losartan from water systems. This research not only enriches our understanding of pollutant degradation mechanisms, but also paves the way for the development of sustainable water treatment technologies, specifically targeting the removal of pharmaceutical contaminants from aquatic environments.

Irbesartan belongs to the Sartan family, whose members are used in the treatment of arterial hypertension and kidney disease among patients with hypertension and type 2 diabetes mellitus as part of a treatment based on antihypertensive drugs. This drug has reached surface waters, accumulating to the extent of being considered an emerging pollutant, along with other substances from the same class. Wastewater treatment plants, which constitute the main environmental source of this compound, fail to completely reduce its presence in wastewater and generate additional toxic byproducts through the chlorine-based disinfection process. This study provides a comprehensive investigation into the chlorination mechanisms of irbesartan, revealing the identity of twelve new byproducts, which were characterized using NMR and mass spectrometry (MS-TOF). The other six byproducts were published in a previous study, allowing for the confirmation of some aspects of the supposed mechanisms of degradation, along with the identification of those that had only been hypothesized. An ecotoxicological assessment of a mixture and isolated byproducts was performed using Raphidocelis subcapitata for algal growth inhibition, Daphnia magna for immobility, and Aliivibrio fischeri for luminescence inhibition. The results revealed the variable toxicity of irbesartan and its byproducts. Different organisms exhibited varying sensitivities to the byproducts, with Aliivibrio fischeri being the most sensitive. The coexistence of multiple byproducts in the environment, their high toxicity, and their potential interactions highlight the significant environmental risks associated with chlorination and its derivates. Our study highlights the ongoing debate surrounding the generation of disinfection byproducts.

Tannery wastewater is considered one of the most contaminated and problematic wastes since it consists of considerable amounts of organic and inorganic compounds. These contaminants result in high chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS). In this work, the heterogeneous photodegradation of recalcitrant COD in wastewater from the tanning industry was investigated, in particular the recalcitrant COD due to the presence of vegetable tannins extracted from mimosa and chestnut and from synthetic tannins based on 4,4′ dihydroxy phenyl sulfone. TiO₂ Aeroxide P-25 was employed to study the photodegradation of model molecules in batch conditions under different parameters, namely initial concentration of COD, temperature, and catalyst dose. The maximum COD abatement reached was 60%. Additionally, preliminary kinetic investigation was conducted to derive the main kinetic parameters that can be useful for process scale-up. It was found to be independent of the temperature value but linearly dependent on both catalyst loading and the initial COD value.

In recent years, the environmental impact of pharmaceutical residues has emerged as a pressing global concern, catalyzed by their widespread usage and persistence in aquatic ecosystems. Among these pharmaceuticals, acyclovir (ACV) stands out due to its extensive prescription during medical treatments for herpes simplex virus, chickenpox, and shingles, as well as its heightened usage amidst the COVID-19 pandemic. ACV is excreted largely unchanged by the human body, leading to significant environmental release through wastewater effluents. The urgency of addressing ACV’s environmental impact lies in its potential to persist in water bodies and affect aquatic life. This persistence underscores the critical need for effective degradation strategies that can mitigate its presence in aquatic systems. This study focuses on employing sodium hypochlorite as an oxidative agent for the degradation of ACV, leveraging its common use in wastewater treatment plants. Our research aims to explore the kinetics of ACV degradation, identify and characterize its degradation byproducts, and optimize the conditions under which complete degradation can be achieved. By assessing the efficiency of sodium hypochlorite in real wastewater samples, this study seeks to provide practical insights into mitigating ACV contamination in aquatic environments. The novelty of this research lies in its comprehensive approach to understanding the degradation pathways of ACV and evaluating the feasibility of using sodium hypochlorite as a sustainable solution in wastewater treatment. By addressing the environmental concerns associated with ACV and offering practical solutions, this study contributes to the broader goal of sustainable pharmaceutical waste management and environmental stewardship.