Cannabis plant has long been execrated by law in different nations due to the psychoactive properties of only a few cannabinoids. Recent scientific advances coupled with growing public awareness of cannabinoids as a medical commodity drove legislation change and brought about a historic transition where the demand rose over ten-fold in less than five years. On the other hand, the technology required for cannabis processing and the extraction of the most valuable chemical compounds from the cannabis flower remains the bottleneck of processing technology. This paper sheds light on the downstream processing steps and principles involved in producing cannabinoids from Cannabis sativa L. (Hemp) biomass. By categorizing the extraction technology into seed and trichome, we examined and critiqued different pretreatment methods and technological options available for large-scale extraction in both categories. Solvent extraction methods being the main focus, the critical decision-making parameters in each stage, and the applicable current technologies in the field, were discussed. We further examined the factors affecting the cannabinoid transformation that changes the medical functionality of the final cannabinoid products. Based on the current trends, the extraction technologies are continuously being revised and enhanced, yet they still fail to keep up with market demands.
To investigate the effect of reactor performance/configuration of biodiesel production on process parameters (mass & energy consumption, required facilities etc.), two diverse production processes (from vegetable oil) were implemented/designed using Aspen HYSYS V7.2. Two series reactors were taken into account where overall conversion was set to be 97.7% and 70% in first and second processes respectively. Comparative analysis showed that an increase in conversion yield caused to consumption reduction of oil, methanol, cold energy and hot energy up to 9.1%, 22%, 67.16% and 60.28% respectively; further, a number of facilities (e.g. boiler, heat exchanger, distillation tower) were reduced. To reduce mass & energy consumption, mass/heat integration method was employed. Applying integration method showed that in the first design, methanol, cold and hot energy were decreased by 49.81%, 17.46% and 36.17% respectively; while in the second design, oil, methanol, cold and hot energy were decreased by 9%, 60.57% 19.62% and 36.58% respectively.
This paper aims to propose a new algorithm for designing thermal vapor compressors (TVCs) using given operation parameters. First, an axisymmetric model was used to simulate a TVC, and the results were compared with those from published experimental results. A simulation set was designed to analyze the TVC dimensions, and then statistically-significant parameters (p-value < 0.05) were chosen for the subsequent studies. Thereafter, three parametric lengths were defined and a model presenting entrainment ratio (ER) was developed using a set of simulation results. The obtained characteristic equation allows us to scale (up or down) the TVC to different capacities, calculate the real-time sizes or predict the performance. It was found that the critical “TVC/primary nozzle” throat diameter ratio is constant in every scale-up study, depending on operation conditions. By establishing a characteristic graph, the approach was expanded for a broader algorithm. The comparative results revealed that this approach is able to predict the ER for every scaling study with an error of less than 2.8%. This approach can be used to devise TVCs ejectors using any given ER and capacity within the ranges of possible usage.