The electromagnetic theory of diffraction and the Babinet principle are applied to the design of artificial metasurfaces and metamaterials. A new particle, the complementary split rings resonator, is proposed for the design of metasurfaces with high frequency selectivity and planar metamaterials with a negative dielectric permittivity. Applications in the fields of frequency selective surfaces and polarizers, as well as in microwave antennas and filter design, can be envisaged. The tunability of all these devices by an applied dc voltage is also achievable if these particles are etched on the appropriate substrate.
We explore, both experimentally and theoretically, the existence in the millimeter-wave range of the phenomenon of extraordinary light transmission through arrays of subwavelength holes. We have measured the transmission spectra of several samples made on aluminum wafers by use of an AB Millimetre quasi-optical vector network analyzer in the wavelength range 4.2–6.5 mm. Clear signals of the existence of resonant light transmission at wavelengths close to the period of the array appear in the spectra.
A complementary split ring resonator (CSRR)-based metallic layer is proposed as a route to mimic surface plasmon polaritons. A numerical analysis of the textured surface is carried out and compared to previous prominent topologies such as metal mesh, slit array, hole array, and Sievenpiper mushroom surfaces, which are studied as well from a transmission line perspective. These well-documented geometries suffer from a narrowband response, alongside, in most cases, metal thickness constraint (usually of the order of λ/4) and non-subwavelength modal size as a result of the large dimensions of the unit cell (one dimensions is at least of the order of λ/2). All of these limitations are overcome by the proposed CSRR-based surface. Besides, a planar waveguide is proposed as a proof of the potential of this CSRR-based metallic layer for spoof surface plasmon polariton guiding. Fundamental aspects aside, the structure under study is easy to manufacture by simple PCB techniques and it is expected to provide good performance within the frequency band from GHz to THz.
In this work we present the concept and design of an ultrathin (λ/22) terahertz (THz) unidirectional carpet cloak based on the local phase compensation approach enabled by gradient metasurfaces. A triangular surface bump with center height of 4.1 mm (1.1λ) and tilt angle of 20° is covered with a metasurface composed of an array of suitably designed closed ring resonators with a transverse gradient of surface impedance. The ring resonators provide a wide range of control for the reflection phase with small absorption losses, enabling efficient phase manipulation along the edge of the bump. Our numerical results demonstrate a good performance of the designed cloak in both near field and far field, and the cloaked object mimics a flat ground plane within a broad range of incidence angles, over 35° angular spectrum centered at 45°. The presented cloak design can be applied in radar and antenna systems as a thin, lightweight, and easy to fabricate solution for radio and THz frequencies.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.