A numerical model for amplification of ultrashort pulses with high repetition rates in fiber amplifiers is presented. The pulse propagation is modeled by jointly solving the steady-state rate equations and the generalized nonlinear Schrödinger equation, which allows accurate treatment of nonlinear and dispersive effects whilst considering arbitrary spatial and spectral gain dependencies. Comparison of data acquired by using the developed model and experimental results prove to be in good agreement.
Cavity dumping of an all-fiber laser system is demonstrated. The active element is a pulse-picker with nanosecond rise time consisting of a microstructured fiber with electrically driven internal electrodes. The device is used for intracavity polarization rotation and dumping through a polarization splitter. The optical flux is removed from the cavity within one roundtrip and most of the amplified spontaneous emission, spiking and relaxation oscillation that follow during the gain recovery phase of the laser are blocked from the output signal.
This work demonstrates an actively mode-locked fiber laser operating in soliton regime and employing an all-fiber electro-optic modulator. Nonlinear polarization rotation is utilized for femtosecond pulse generation. Stable operation of the all-fiber ring laser is readily achieved at a fundamental repetition rate of 2.6 MHz and produces 460 fs pulses with a spectral bandwidth of 5.3 nm.
Two designs of diamond quarter-wave plates for CO2 lasers, based on the birefringence of sub-wavelength gratings, were manufactured and tested. In one design the grating was etched on the surface of a 300 µm thick polycrystalline diamond substrate. The other consisted of a diamond grating hanging freely in air, suspended at the edges from a silicon frame. The free-hanging design, while more fragile, had several advantages both in terms of fabrication and performance such as a larger grating period, higher transmission, and no need for an antireflective treatment of the backside.
In this paper, we give an overview of recent results on switching of light in fibers with internal electrodes. Polarization rotation, nanosecond gating, and wavelength switching in fiber Bragg gratings and in long period gratings are discussed. Applications are exemplified in Q-switching fiber lasers and in RF-signal filtering.