Interdiffusion of the elements in a diffusion pair consisting of Ti and an equiatomic high-entropy alloy (HEA) TiZrHfNbTaMo in the temperature range of 1473–1673 K has been studied. A calculated results phase diagram of the alloy by Thermo-Calc 2021-B software as used to determine the temperature stability range of the β-phase in the alloy. Ti–HEA diffusion pairs were obtained by low = temperature welding and then diffusion annealing was carried out at temperatures of 1473, 1573, and 1673 K during 12, 9, and 6 h, respectively. The interdiffusion zone was profiled using electron probe microanalysis (EPMA). The diffusion parameters of the HEA’s elements were obtained using Hall’s method. An experimental results discussion is given.
The results of the density functional theory calculation of the segregation energy of refractory metals at grain boundaries (GBs) in the alloys based on nickel (fcc solid solutions), chromium (bcc), and titanium (hcp) are analyzed. The influence of segregation on the cohesive strength of GBs is estimated using the Rice–Wong model, in which the mechanical strength of GBs is characterized by the boundary splitting energy. Refractory metals are shown to contain “useful” elements, which enrich GBs and increase their cohesive strength in alloys of all types. The calculated data are used to design experimental high-temperature alloys (HTAs), the alloying system of which contains useful elements in the form of a package of low-alloy additives in HTAs, namely, nickel (Zr, Nb, Hf, Ta), chromium-based (Nb, Ta), and titanium (W, Ta, Re) alloys. The results of testing the mechanical properties of these experimental alloys are presented. The low-alloy additives are shown to increase the creep resistance of all alloys at elevated temperatures.
The influence of alloying elements on the cohesive strength of metal heat-resistant alloys (HRAs) is analyzed. Special parameters are introduced to characterize the individual contribution of each alloying element. These are the partial molar cohesion energy of the matrix (χ) and the cohesive strength of the grain boundaries (η) and can be calculated by computer modeling based on the density functional theory. The calculating results of the parameters χ and η in nickel HRAs with mono– and polycrystalline structures alloyed with refractory metals are presented. The calculated data are used to select the chemical composition and develop new nickel (Ni) HRAs with superior creep-rupture properties. It is assumed that a similar approach can be used to search for alloying elements that will contribute to increasing the cohesive strength of additive objects. The resistance of coherent γ-γ′ and lamellar (raft) structures in nickel HRAs to the process of diffusion coarsening during operation is analyzed.
The modern approach to the design of heat-resistant metal alloys (HRAs) is analyzed, according to which the creep rupture characteristics of an alloy are mostly determined by the strength of interatomic bonding at grain boundaries (GBs) and in the bulk of a matrix phase. The main attention is paid to the concept of “low alloying additions” to polycrystalline alloys with transition metals, because of which the cohesive strength of the GBs and the cohesion energy of the alloy matrix are increased. This approach is especially important in relation to alloys obtained by powder metallurgy, which, in the compacted state, are fine-grained polycrystals. The methodology for calculating the key parameters of the theory (the energy of impurity segregation to the grain boundaries Egb and to the free surface Efs, as well as the values of the partial molar energy of the cohesion of the alloys) from the first principles is given. The results of applying the theory to the study of Ni-, Cr- and Ti-based alloys and the development of new HRAs based on them are presented. Typical defects in the microstructures of objects obtained using additive technologies (AT) and the application efficiency of standard methods of processing powder alloys (Hot Isostatic Pressing (HIP), heat treatment (HT)) to improve the microstructure and increase the mechanical properties are considered.
The most promising directions of the development of heat-resistant alloys (HRAs) based on refractory metals are analyzed. The microstructures characteristic of HRAs, which it is advisable to form in promising alloys, are considered. The stability factors of the microstructure with respect to the diffusion coarsening of the hardening phases are discussed. Two groups of alloys are considered as the most promising HRAs based on refractory metals. First, the principles for design of HRAs based on (Pt, Ir)-Sc with heterophase γ-γ’ microstructure, where γ-matrix is a (Pt, Ir) solid solution with a FCC lattice, and γ’ is a strengthening phase with the structure L12 by analogy with Ni-base superalloys, are developed. The resistance of γ-γ’ microstructure in Ni, Pt and Ir alloys against the process of diffusion-limited coarsening is analyzed. It is shown that the diffusion permeability of Pt is several times less than that of Ni, so one should expect that Pt-based HRAs will not be inferior to Ni-based HRAs in terms of structural stability. The second group includes HRAs based on many not noble refractory metals. It is shown that solid solutions of the system (Ti, Zr, Hf, Ta, Nb) with a BCC lattice can be considered as a matrix of advanced refractory HRAs. The results of experimental studies of alloys based on (Ti, Zr, Hf, Ta, Nb) additionally alloyed with elements contributing to the formation of strengthening intermetallic and silicide phases are discussed. The issues of segregation of alloying elements at the grain boundaries of refractory alloys and the effect of segregation on the cohesive strength of the boundaries are considered.
19 February 2023 in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
In this work, the interdiffusion features in multicomponent (high-entropy) alloys of refractory metals were studied. The following pairs were chosen as the diffusion study objects: titanium–equiatomic alloy (Hf–Nb–Ta–Ti–Zr–Mo) and titanium–tantalum for the sake of comparison. The article covers the issues of sample preparation, microstructure study, sample preparation methodology for diffusion research, and experimental results. Diffusion annealing was carried out for 12 h in a vacuum at a residual argon pressure of 6.65·10–3 Pa and a temperature of 1200 °С. Particular attention was paid to the method of combining diffusion pairs (titanium with tantalum, titanium with alloy) by thermal cycling near the polymorphic transformation temperature in titanium (882 °C) within ± 50 °C. The behaviour of the most characteristic elements (Ta, Zr, Ti) in the weld area after the titanium and alloy diffusion pair joining was demonstrated. This is the first time that data on the dependence of the intensity of the corresponding spectral line for titanium and elements of a multicomponent alloy on the penetration depth were obtained. A change in the signal intensity for system elements was observed at a depth of 150–200 μm, whereas a sharp drop in the signal intensity was seen to occur at depths of about 50 μm. The effective value of the coefficient of diffusion of elements into titanium averaged over all elements of the alloying system (except for titanium) at a temperature of 1200 °C was calculated. The obtained value was compared to reference data: the self-diffusion coefficient in β-titanium and diffusion coefficients in titanium pairs with alloy doping elements.