Growing environmental concerns have increased the scientific interest in the utilization of natural fibers for the development of epoxy biocomposite materials. The incorporation of one or more fibers in the production of hybrid epoxy polymer composites has been a subject of discussion. It is interesting to acknowledge that natural/synthetic fiber hybridized epoxy composites have superior properties over natural/natural fiber hybridized epoxy composites. Significant efforts have been devoted to the improvement of natural fiber surface modifications to promote bonding with the epoxy matrix. However, to achieve sufficient surface modification without destroying the natural fibers, optimization of treatment parameters such as the concentration of the treatment solution and treatment time is highly necessary. Synthetic and treated natural fiber hybridization in an epoxy matrix is expected to produce biocomposites with appreciable biodegradability and superior mechanical properties by manipulating the fiber/matrix interfacial bonding. This paper presents a review of studies on the processing of epoxy natural fiber composites, mechanical properties, physical properties such as density and water absorption, thermal properties, biodegradability study, nondestructive examination, morphological characterizations, and applications of epoxy-based natural fiber biocomposites. Other aspects, including a review of variables that enhance the mechanical and functional performance of epoxy/natural fibers composites while also increasing the biodegradability of the composite material for environmental sustainability, were presented. The future research focus was elucidated. It is hoped that this review will stimulate and refocus research efforts toward advancing the manufacture of epoxy/natural fiber composites to meet the growing demand for biocomposite materials in the global world.
1 July 2009 in American Journal of Applied Sciences
Structural transformation and magnetic ordering interplays for emergence as well as suppression of superconductivity in 122-iron-based superconducting materials. Electron and hole doping play a vital role in structural transition and magnetism suppression and ultimately enhance the room pressure superconducting critical temperature of the compound. This work models the superconducting critical temperature of 122-iron-based superconductor using tetragonal to orthorhombic lattice (LAT) structural transformation during low-temperature cooling and ionic radii of the dopants as descriptors through hybridization of support vector regression (SVR) intelligent algorithm with particle swarm (PS) parameter optimization method. The developed PS-SVR-RAD model, which utilizes ionic radii (RAD) and the concentrations of dopants as descriptors, shows better performance over the developed PS-SVR-LAT model that employs lattice parameters emanated from structural transformation as descriptors. Using the root mean square error (RMSE), coefficient of correlation (CC) and mean absolute error as performance measuring criteria, the developed PS-SVR-RAD model performs better than the PS-SVR-LAT model with performance improvement of 15.28, 7.62 and 72.12%, on the basis of RMSE, CC and Mean Absolute Error (MAE), respectively. Among the merits of the developed PS-SVR-RAD model over the PS-SVR-LAT model is the possibility of electrons and holes doping from four different dopants, better performance and ease of model development at relatively low cost since the descriptors are easily fetched ionic radii. The developed intelligent models in this work would definitely facilitate quick and precise determination of critical transition temperature of 122-iron-based superconductor for desired applications at low cost with experimental stress circumvention.
Spinel ferrites nanomaterials are magnetic semiconductors with excellent chemical, magnetic, electrical, and optical properties which have rendered the materials useful in many technological driven applications such as solar hydrogen production, data storage, magnetic sensing, converters, inductors, spintronics, and catalysts. The surface area of these nanomaterials contributes significantly to their targeted applications as well as the observed physical and chemical features. Experimental doping has shown a great potential in enhancing and tuning the specific surface area of spinel ferrite nanomaterials while the attributed experimental challenges call for viable theoretical model that can estimate the surface area of doped spinel ferrite nanomaterials with high degree of precision. This work develops stepwise regression (STWR) and hybrid genetic algorithm-based support vector regression (GBSVR) intelligent model for estimating specific surface area of doped spinel ferrite nanomaterials using lattice parameter and the size of nanoparticle as descriptors to the models. The developed hybrid GBSVR model performs better than STWR model with the performance improvement of 7.51% and 22.68%, respectively, using correlation coefficient and root mean square error as performance metrics when validated with experimentally measured specific surface area of doped spinel ferrite nanomaterials. The developed GBSVR model investigates the influence of nickel, yttrium, and lanthanum nanoparticles on the specific surface area of different classes of spinel ferrite nanomaterials, and the obtained results agree excellently well with the measured values. The accuracy and precision characterizing the developed model would be of immense importance in enhancing specific surface area of doped spinel ferrite nanomaterial prediction with circumvention of experimental stress coupled with reduced cost.
26 April 2022 in Mathematical Problems in Engineering
Nanocrystalline spinel ferrite based compounds are technological driven materials with interesting potentials in photocatalysis for renewable energy generation, gas sensing for pollution control, magnetic drug delivery, rod antennas, storage media (high density) and supercapacitive materials, among others. Specific surface area of spinel ferrite based compounds contributes immensely to the application of this semiconductor in industrial domains. Experimental determination of specific surface area is laborious and costly and consumes appreciable time. Compositional substitutions in crystal structure effectively improve physical properties and enhance specific surface area through alteration of moment distribution between tetrahedral oxygen sites and octahedral coordination. With the aid of distorted lattice parameters due to compositional substitution and the spinel ferrite nanocrystallite size as model descriptors, this present work models the specific surface area of spinel ferrite nanomaterial through extreme learning machine (ELM) based intelligent modeling method. The developed sigmoid activation function-based ELM (S-ELM) model shows superior performance over genetic algorithm based support vector regression (GBSVR) and stepwise regression (STWR) models existing in the literature with performance improvement of 61.31% and 70.01%, respectively, using root mean square error performance metric. The significances of cobalt and lanthanum compositional substitution on the specific surface area of spinel ferrite nanomaterials were investigated using S-ELM model. Ease of implementation of S-ELM model as compared with the existing GBSVR model, coupled with the demonstrated improved performance and persistent closeness of its predictions with the experimental values, would be highly meritorious for quick and precise characterization of specific surface area of spinel ferrite nanomaterials for various desired applications.