Mohamed Mostafa Hassan Mostafa

Prof. Mohamed Mostafa Hassan Mostafa

orcid
Chair and Director: KZNDoT Chair in Sustainable Transportati...

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
AFAneke Frank
Aneke Frank
BABankole Awuzie
Bankole Awuzie
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa
COChikezirim Okorafor
Chikezirim Okorafor
Fired clay brickwork in buildings is prone to cracks and deterioration upon exposure to long-time acidic contamination and water absorption, hence decreasing the bearing capacity of masonry walls. As its contribution toward resolving this challenge, this study assessed the durability and morphological characteristics of high-strength performance bricks produced from a mixture of PET waste (PW) and foundry sand (FS). The PET waste bricks (PWBs) were produced through different proportioning (PW: FS) of 20%, 30%, and 40% of the dry mass of FS. The PWBs produced were tested for durability and compressive and tensile strengths and compared to fired clay bricks to evaluate their load-bearing capacity under compression and tension. Furthermore, scanning electron microscopy (SEM) tests were employed to analyze the morphological structure of the bricks. The test results revealed that the PWBs recorded an appreciable strength of 1.5–2 times that of fired clay bricks, and lower water absorption whilst retaining their ultimate strengths after complete immersion in water and acidic concentrations. The morphology of PWB possessed greater intercluster bonds on the surface compared to clay bricks. The findings demonstrate a reasonable methodological approach toward the production of masonry bricks using a mixture of PET waste and spent foundry sands.

26 August 2019 in International Journal of Geotechnical Engineering
Verified
Journal Article
Closed access
AFAneke Frank
Aneke Frank
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa
AMA. Moubarak
A. Moubarak
South Africa is cut-across an arid and semi-arid zone, this implies that 95% of its roadbed is under unsaturated condition. In this context, resilient performance of subgrades is determined considering matric suction ( ψ) and traffic loading parameters for resilient modulus (MR) analysis through the application of unsaturated soil mechanics. Expansive natural subgrade soil sample collected from Northern Cape in South Africa is selected for this study. Series of MR tests, Free swell index tests, Zero swelling tests, suction tests, X-Ray Diffraction and Scanning Electron Microscopy tests were conducted to investigate the unsaturated response of expansive subgrade stabilized with varying percentages 4%, 6%, 8% and 10% of activated fly ash (AFA). The suction components of the representative subgrade soils were determined through filter paper method. The soil-water retention curve (SWRC) was also analysed using Fredlund and Xing, and Seki’s models. The results showed that inclusions of 6%, 8% and 10% AFA caused some considerable increase in MR and suction values to a limiting values 6% AFA content, below which resilient modulus values were reduced. The low MR values are recorded in 4% AFA stabilized specimen, as a result of insufficient free reactive calcium oxide. This resulted to incomplete pozzolanic reaction with the clay minerals. Significant changes were observed in the soil pore structure, based on microstructure analysis of the stabilized subgrade soils. Inter-cluster cemented bonds, were noted on the surface structure of the stabilized subgrade compared to unstabilized subgrade soil, due to increase in MR.

23 August 2023 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
Verified
Journal Article
Open access
PDF file
AUAlptekin Ulutaş
Alptekin Ulutaş
FBFigen BALO
Figen BALO
KMKatarina Mirković
Katarina Mirković
Željko StevićŽeljko Stević
Željko Stević
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa
In the context of sustainable buildings, an ecological study of building and insulating materials is critical since it may assist affirm or shift the path of new technology development. Utilising sustainable material is a part of the sustainable improvement. For this reason, material fabrication is the primary process for the energy usage and release of intense environmental gaseous. The fabrication of the insulation and building materials, as in every fabrication process, comprises an energy consumption of crude materials in addition to the pollutants’ release. In buildings, insulation is a relevant technological resolution for cutting energy usage. This study aims to assess the primary energy consumption and the environmental effects of the fabrication of building and thermal isolation materials by using a new hybrid MCDM model. The proposed new hybrid MCDM model includes Fuzzy FUCOM, CCSD and CRADIS methods. While the subjective weights of the criteria were determined with the fuzzy FUCOM method, the objective weights of the criteria were determined with the CCSD method. Construction materials were listed with the CRADIS method. According to the fuzzy FUCOM method, the most important criterion was determined as the CR3 criterion, while the most important criterion according to the CCSD method was determined as the CR1 criterion. According to the combined weights, the most important criterion was determined as the CR3 criterion. According to the CRADIS method, the material with the best performance was determined as Cement Plaster. The methodology used in this study is a novel approach therefore it has not been used in any study before. In addition, since the CRADIS method is a newly developed MCDM method, the number of articles related to this method is low. Therefore, this research gap will be filled with this study.

3 November 2008 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa
HKHussain Khalid
Hussain Khalid
Incinerator bottom ash is a material removed from the grating at the bottom of energy-from-waste plants. This ash has traditionally been land-filled. However, this ash could be processed to produce incinerator bottom ash aggregate (IBAA). Due to the low density and high stiffness of IBAA, it has become widely used as a secondary aggregate material especially in road construction. It is chemically inert, with very low concentrations of soluble materials. Despite this increase in IBAA use, higher usage still is desirable. To achieve this aim, the mechanical and leaching properties of bituminous mixtures containing high levels of IBAA merit further exploration. In this paper, an experimental investigation was undertaken to explore the mechanical and environmental characteristics of bituminous mixtures containing high IBAA contents. Three different mixtures were studied containing 30, 60 and 80% IBAA. A limestone blend, used as a reference mix, was also included. To evaluate the mechanical properties, the effect of IBAA content on indirect tensile stiffness modulus was investigated. The sensitivity to moisture ingress was also studied. The British Board of Agrément regime was adopted and used for this purpose. In addition, an accelerated oven-ageing procedure was applied on samples to study the age-hardening effect on their stiffness. Subsequently, uniaxial compression tests were carried out to study the effect of IBAA on bituminous mixtures' rutting resistance. As regards to the environmental characteristics, mixtures were tested for their leaching potential and the constituent concentrations in their leachates were determined for compacted bituminous and loose non-bituminous blends. The agitated extraction and the tank leaching tests were used for this objective. Results showed that, generally, replacing limestone with IBAA in bituminous mixtures improved their stiffness, excluding 80% IBAA content mix. Moreover, it was found that water ingress had a limited effect on IBAA bituminous mixtures' properties while age hardening has a more significant effect. IBAA was, generally, found to improve the bituminous mixtures' rutting resistance. Leaching test results showed that most leachate constituents were found to be within allowable limits. Despite this, diffusion and diffusion coefficient results highlighted the importance of investigating the potential effects of sulphate leaching on the environment. Finally, a one diffusion dimensional model was used as the worst case scenario tool to predict cumulative release from IBAA bituminous mixtures.

27 August 2019 in International Journal of Geotechnical Engineering
Verified
Journal Article
Closed access
AFAneke Frank
Aneke Frank
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa
AMAzza Moubarak
Azza Moubarak
Pavements across Free State in South Africa deteriorate as a result of swelling and shear failure of the subgrade materials, and cyclic loads associated with moving vehicles. This study investigated the causes of distresses and cracks identified on the pavements across the province. Material samples were collected from three representative sites by core drilling. Series of consolidated undrained (CU) triaxial tests, unconfined compressive strength (UCS) tests, free swell index (FSI) tests, zero swelling tests (ZSTs) and California bearing ratio (CBR) tests were performed to determine shear strength resistance and swelling index of the subgrade material, respectively. X-Ray Diffraction (XRD) tests were employed to identify the minerals responsible for swelling activities in the subgrades. The results revealed that the investigated pavements deteriorate by swelling of the subgrades and were significantly affected by traffic loads that triggered resistance failure to moisture from the asphalt layer. The asphalt thickness layer failed to provide enough surcharge pressure to confine swelling stress from the subgrades. In comparison, swelling stress values from the CBR mould were 1.6% lower than that of the swelling stress values obtained from oedometer ring cell on the average. The result further revealed that swelling stress was the major cause of the pavements' failure. Thus, as swelling stress increased with an increase in moisture; this consequently led to a considerable decrease in shear resistance of the subgrades.

29 April 2020 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
AIAneke Frank Ikechukwu
Aneke Frank Ikechukwu
Mohamed Mostafa Hassan MostafaMohamed Mostafa Hassan Mostafa
Mohamed Mostafa Hassan Mostafa