1 January 2019 in Advances in Civil Engineering
In order to preserve natural resources, the use of waste and alternative materials in the construction and maintenance of roads is increasingly investigated. This paper presents the results of testing wearing course asphalt mixtures (AC 11s SURF 50/70) made with various percentages of fly ash, used as a partial or complete substitute for mineral filler. The properties of fly ash were determined to assess their suitability for use in asphalt mixtures. The experimental research was performed on asphalt samples containing fly ash from three different sources, with 25%, 50%, 75%, and 100% of mineral filler substitution. The control mixture was prepared with 100% of mineral filler. The paper presents the volumetric composition, stability, and flow of asphalt mixtures tested on standard Marshall’s samples, water sensitivity, and resistance to permanent deformation. The results of this study indicate that a satisfactory volumetric composition can be achieved by adding fly ash, while the bulk density and voids of the mineral and asphalt mixture generally depend on the type of fly ash and its content. The stability and flow of mixtures with fly ash are favourable compared with the control mixture. The water sensitivity of mixtures with fly ash is generally lower compared with the control mixture and depends on the type and percentage of fly ash. The resistance to permanent deformation of the asphalt mixtures depends on the fly ash type and percentage. The results obtained in this study are an important step towards broader implementation of fly ash in asphalt mixtures.
23 August 2023 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
In the context of sustainable buildings, an ecological study of building and insulating materials is critical since it may assist affirm or shift the path of new technology development. Utilising sustainable material is a part of the sustainable improvement. For this reason, material fabrication is the primary process for the energy usage and release of intense environmental gaseous. The fabrication of the insulation and building materials, as in every fabrication process, comprises an energy consumption of crude materials in addition to the pollutants’ release. In buildings, insulation is a relevant technological resolution for cutting energy usage. This study aims to assess the primary energy consumption and the environmental effects of the fabrication of building and thermal isolation materials by using a new hybrid MCDM model. The proposed new hybrid MCDM model includes Fuzzy FUCOM, CCSD and CRADIS methods. While the subjective weights of the criteria were determined with the fuzzy FUCOM method, the objective weights of the criteria were determined with the CCSD method. Construction materials were listed with the CRADIS method. According to the fuzzy FUCOM method, the most important criterion was determined as the CR3 criterion, while the most important criterion according to the CCSD method was determined as the CR1 criterion. According to the combined weights, the most important criterion was determined as the CR3 criterion. According to the CRADIS method, the material with the best performance was determined as Cement Plaster. The methodology used in this study is a novel approach therefore it has not been used in any study before. In addition, since the CRADIS method is a newly developed MCDM method, the number of articles related to this method is low. Therefore, this research gap will be filled with this study.