Mohamed Mabrouk

Dr. Mohamed Mabrouk

Electronic and Communication Department, Faculty of Engineering, Alexandria University, Alexandria, Egypt
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2016 in IEEE Transactions on Biomedical Engineering
Verified
Journal Article
Closed access
MFMohamad Forouzanfar
Mohamad Forouzanfar
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
SRSreeraman Rajan
Sreeraman Rajan
MBMiodrag Bolic
Miodrag Bolic
HDHilmi R. Dajani
Hilmi R. Dajani
VGVoicu Z. Groza
Voicu Z. Groza
Objectives: The use of remote sensing technologies such as radar is gaining popularity as a technique for contactless detection of physiological signals and analysis of human motion. This paper presents a methodology for classifying different events in a collection of phase modulated continuous wave radar returns. The primary application of interest is to monitor inmates where the presence of human vital signs amidst different, interferences needs to be identified. Methods: A comprehensive set of features is derived through time and frequency domain analyses of the radar returns. The Bhattacharyya distance is used to preselect the features with highest class separability as the possible candidate features for use in the classification process. The uncorrelated linear discriminant analysis is performed to decorrelate, denoise, and reduce the dimension of the candidate feature set. Linear and quadratic Bayesian classifiers are designed to distinguish breathing, different human motions, and nonhuman motions. The performance of these classifiers is evaluated on a pilot dataset of radar returns that contained different events including breathing, stopped breathing, simple human motions, and movement of fan and water. Results: Our proposed pattern classification system achieved accuracies of up to 93% in stationary subject detection, 90% in stop-breathing detection, and 86% in interference detection. Conclusion: Our proposed radar pattern recognition system was able to accurately distinguish the predefined events amidst interferences. Significance: Besides inmate monitoring and suicide attempt detection, this paper can be extended to other radar applications such as home-based monitoring of elderly people, apnea detection, and home occupancy detection.

1 January 2016 in Journal of Sensors
Verified
Journal Article
Open access
PDF file
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
SRSreeraman Rajan
Sreeraman Rajan
MBMiodrag Bolic
Miodrag Bolic
MFMohamad Forouzanfar
Mohamad Forouzanfar
HDHilmi R. Dajani
Hilmi R. Dajani
IBIzmail Batkin
Izmail Batkin
Radar-based noncontact sensing of life sign signals is often used in safety and rescue missions during disasters such as earthquakes and avalanches and for home care applications. The radar returns obtained from a human target contain the breathing frequency along with its strong higher harmonics depending on the target’s posture. As a consequence, well understood, computationally efficient, and the most popular traditional FFT-based estimators that rely only on the strongest peak for estimates of breathing rates may be inaccurate. The paper proposes a solution for correcting the estimation errors of such single peak-based algorithms. The proposed method is based on using harmonically related comb filters over a set of all possible breathing frequencies. The method is tested on three subjects for different postures, for different distances between the radar and the subject, and for two different radar platforms: PN-UWB and phase modulated-CW (PM-CW) radars. Simplified algorithms more suitable for real-time implementation have also been proposed and compared using accuracy and computational complexity. The proposed breathing rate estimation algorithms provide a reduction of about 81% and 80% in the mean absolute error of breathing rates in comparison to the traditional FFT-based methods using strongest peak detection, for PN-UWB and PM-CW radars, respectively.

2 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
HAHaythem Abdullah
Haythem Abdullah
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
AKAhmed Abd-Elnaby Kabeel
Ahmed Abd-Elnaby Kabeel
AHAmr Hussein
Amr Hussein
Collision avoidance and autonomous control of vehicles have become essential needs for providing a high-quality and safe life. This paper introduces a new generic scheme for a virtual antenna array (VAA) and its application in a train collision-avoidance system (TCAS). The proposed TCAS shall have the capability of identifying the range and angle of an object in front of a moving train and provide the required alerts. Thereby, a new virtual array distribution for both the transmitting and the receiving antenna arrays is introduced to get a long-range object detection and high-resolution multi-input multi-output (MIMO) system. This can be accomplished because the VAA radiation pattern is the multiplication of the radiation patterns for both the transmitting and receiving antenna arrays, which is different than each one of them alone. In this work, the VAA is utilized in radar systems in which the radar range depends on the multiplication of the gain of the transmitting and receiving antennas. So, we introduce a new scheme for the general design of VAA-based radars. A prototype for the antenna system was fixed on a of Texas Instruments platform for the cascading radar. One of the main problems of the VAA is the loss of radiated power in undesired directions, which affects the maximum detection range in beamforming systems and degrades the diversity gain in MIMO applications. These issues have been solved by the introduction of the practical implementation of a proposed high-gain, low side lobe level VAA system for automotive radar that is based on the integration of four AWR1243 RF chips operating in a frequency range of 76 GHz to 81 GHz. It was implemented using low-power 45 nm (TI) RFCMOS technology. The measured gain of the realized VAA was 47.2 dBi, which was 1.815 times higher than that of the Texas instrumentation linear frequency modulated continuous wave (TI’ LFMCW) radar, which was 26 dBi. The proposed VAA saved 45% of the required implementation area compared to the TI’ LFMCW antenna array. The VAA system was fabricated and tested in an anechoic chamber, and it was found that the simulated and measured patterns of the proposed VAA were highly matched in terms of half-power beamwidth and side lobe level.

25 July 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
KMKarim H. Moussa
Karim H. Moussa
ASAhmed Sayed
Ahmed Sayed
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
HGHeba Gaber
Heba Gaber
In contemporary wireless communication systems, the multiple-input and multiple-output systems are extensively utilized due to their enhanced spectral efficiency and diversity. Densely packed antenna arrays play an important role in such systems to enhance their spatial diversity, array gain, and beam scanning capabilities. In this article, a slotted meta-material decoupling slab (S-MTM-DS) with dual reflexes slotted E-shapes and an inductive stub is proposed. Its function was validated when located between two microstrip patch antenna elements to reduce the inter-element spacing, the mutual coupling, the return losses, and manufacturing costs due to size reduction. A prototype is simply fabricated in a volume of 67.41 × 33.49 × 1.6 mm3 and frequency-span measured from 8.4:11 GHz. At 9.4 GHz frequency, the spaces between the transmitting elements are decreased to 0.57 of the free space wavelength. When the proposed isolation S-MTM-DS is applied, the average isolation among them is measured to be −36 dB, the operational bandwidth is enhanced to be 1.512 GHz, the fractional bandwidth improved to be 16.04%, and the return losses are decreased to be −26.5 dB at 9.4 GHz center frequency. Consequently, the proposed design has the potential to be implemented simply in wireless contemporary communication schemes.

1 May 2014
Verified
Conference Paper
Closed access
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
SRSreeraman Rajan
Sreeraman Rajan
MBMiodrag Bolic
Miodrag Bolic
IBIzmail Batkin
Izmail Batkin
HDHilmi R. Dajani
Hilmi R. Dajani
VGVoicu Z. Groza
Voicu Z. Groza
A novel method for stand-off detection and localization of human targets behind the wall using a monostatic ultra wideband (UWB) radar is proposed. In this method, Singular Value Decomposition (SVD) and skewness are employed to achieve detection and localization. Identification of possible bins that may contain the target is done using the SVD while decision about the presence of the target in the identified bin is made using skewness. After preprocessing of the signal, skewness of the radar returns over the scans at every bin is calculated before applying this methodology. In this method, the contributions of the clutter is removed to enhance the returns from the target, by removing the dominant singular values iteratively and the range profiles over scans are reconstructed at each iteration. After each iteration, the energy in the bin over the scans is compared and the bin with maximum energy is identified as a potential target location and the previously determined skewness at this bin is compared against a precomputed data-dependent threshold. A target is declared detected if the skewness at the selected bin is lower than the threshold. The proposed method is applied on 46 measurements with a single target behind 20 cm thick gypsum wall. This method produced a 0% probability of error type I (False detection) and 4.34% error type II (missed detection) while detecting single targets. Using the same approach, it was also possible to discriminate between two targets standing 0.3 m away from each other and 3.5 m behind a 20 cm thick gypsum wall.

2 August 2022 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
MBMohamed Barbary
Mohamed Barbary
AHAlaa S. Hafez
Alaa S. Hafez
MEMohamed H. Abd ElAzeem
Mohamed H. Abd ElAzeem
TSTamer Soliman
Tamer Soliman
AEAhmed E. Elbanna
Ahmed E. Elbanna
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
The simultaneous imaging and tracking of drones and small UAVs is one of the most challenging problems in inverse synthetic aperture radar (ISAR) signal processing and has received significant attention recently. Wide-angle ISAR imaging may offer better resolution and richer geometrical features. Aiming at this issue, we propose a new algorithm for multiple extended drone targets (EDTs) detection and tracking from wide-angle ISAR images. Since a conventional tracking algorithm using a random matrices model (RMM) is not accurate enough to reconstruct a drone's extension by one ellipse, an appropriate technique needs to be developed for ISAR imaging and tracking of EDTs. This paper models the EDT's extension as multiple ellipses with a time-varying orientation angle and solves the resulting interference problem involving data association between the nonlinear measurements and sub-ellipses. Recently, the multi-Bernoulli (MB) filter for extended targets has been proposed with the RMM approach for linear ellipsoidal target tracking by additional state variables. However, the implementation of the MB-RMM filter for nonlinear non-Gaussian models and the Doppler effect has not been presented, especially for ISAR images. We consider linearizing the nonlinear observations to solve the nonlinearity due to the Doppler effect, target motion, and wide-angle ISAR images. We presented a new robust Sub-RMM-MB-TBD filter to obtain the estimated orientation of EDT's shape after using the range-only motion compensation that uses both range and Doppler information. Moreover, the authors applied the k-space algorithm to generate ISAR image. Simulation results demonstrate this remarkable performance.