Ahmed Sayed

Dr. Ahmed Sayed

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2022 in Electronics
Verified
Journal Article
Open access
PDF file
MAMohamed Abdul-Al
Mohamed Abdul-Al
ASAhmed Sayed
Ahmed Sayed
Issa ElferganiIssa Elfergani
Issa Elfergani
RLRichard Littlehales
Richard Littlehales
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
Employing electromagnetic fields (EMFs) in new wireless communication and sensing technologies has substantially increased the level of human exposure to EMF waves. This paper presents a useful insight into the interaction of electromagnetic fields with biological media that is defined by the heat generation due to induced currents and dielectric loss. The specific absorption rate (SAR) defines the heating amount in a biological medium that is irradiated by an electromagnetic field value. The paper reviews the radio frequency hazards due to the SAR based on various safety standards and organisations, including a detailed investigation of previously published work in terms of modelling and measurements. It also summarises the most common techniques utilised between 1978 and 2021, in terms of the operational frequency spectrum, bandwidth, and SAR values.

6 December 2022 in IEEE Access
Verified
Journal Article
Open access
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
ASAhmed Sayed
Ahmed Sayed
MDMohammad Darwish
Mohammad Darwish
KMKarim H. Moussa
Karim H. Moussa
Chan Hwang SeeChan Hwang See
Chan Hwang See
HGHeba Gaber
Heba Gaber
In this manuscript, a multiple-input multiple-output (MIMO) antenna array system with identical compact antenna elements providing wide radiation and diversity function is introduced for sub 6 GHz fifth-generation (5G) cellular applications. The introduced design contains four pairs of miniaturized square-loop resonators with dual-polarization and independently coupled T-shaped feed lines which have been placed symmetrically at the edge corners of the smartphone mainboard with an overall size of 75 mm × 150 mm. Therefore, in total, the introduced array design encompasses four pairs of horizontally and vertically polarized resonators. The elements are very compact and utilize at 3.6 GHz, a potential 5G candidate band. In order to improve the frequency bandwidth and radiation coverage, a square slot has been placed and excited under each loop resonator. Desirable isolation has been observed for the adjacent elements without any decoupling structures. Therefore, they can be considered self-isolated elements. The presented smartphone antenna not only exhibits desirable radiation but also supports different polarizations at various sides of the printed circuit board (PCB). It exhibits good bandwidth of 400 MHz (3.4-3.8 GHz), high-gain patterns, improved radiation coverage, and low ECC/TARC (better than 0.004 and -30 dB at 3.6 GHz, respectively). Experimental measurements were conducted on an array manufactured on a standard smartphone board. The simulated properties of this MIMO array are compared with the measurements, and it is found that they are in good agreement. Furthermore, the introduced smartphone array offers adequate efficiency in both the user interface and components integrated into the device. As a result, it could be suitable for 5G handheld devices.

25 July 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
KMKarim H. Moussa
Karim H. Moussa
ASAhmed Sayed
Ahmed Sayed
Mohamed MabroukMohamed Mabrouk
Mohamed Mabrouk
HGHeba Gaber
Heba Gaber
In contemporary wireless communication systems, the multiple-input and multiple-output systems are extensively utilized due to their enhanced spectral efficiency and diversity. Densely packed antenna arrays play an important role in such systems to enhance their spatial diversity, array gain, and beam scanning capabilities. In this article, a slotted meta-material decoupling slab (S-MTM-DS) with dual reflexes slotted E-shapes and an inductive stub is proposed. Its function was validated when located between two microstrip patch antenna elements to reduce the inter-element spacing, the mutual coupling, the return losses, and manufacturing costs due to size reduction. A prototype is simply fabricated in a volume of 67.41 × 33.49 × 1.6 mm3 and frequency-span measured from 8.4:11 GHz. At 9.4 GHz frequency, the spaces between the transmitting elements are decreased to 0.57 of the free space wavelength. When the proposed isolation S-MTM-DS is applied, the average isolation among them is measured to be −36 dB, the operational bandwidth is enhanced to be 1.512 GHz, the fractional bandwidth improved to be 16.04%, and the return losses are decreased to be −26.5 dB at 9.4 GHz center frequency. Consequently, the proposed design has the potential to be implemented simply in wireless contemporary communication schemes.

19 September 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Atta UllahAtta Ullah
Atta Ullah
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
ASAhmed Sayed
Ahmed Sayed
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
This study aims to introduce a new phased array design with improved radiation properties for future cellular networks. The procedure of the array design is simple and has been accomplished on a low-cost substrate material while offering several interesting features with high performance. Its schematic involves eight air-filled slot-loop metal-ring elements with a 1 × 8 linear arrangement at the top edge of the 5G smartphone mainboard. Considering the entire board area, the proposed antenna elements occupy an extremely small area. The antenna elements cover the range of 21–23.5 GHz sub-mm-wave 5G bands. Due to the air-filled function in the configurations of the elements, low-loss and high-performance radiation properties are observed. In addition, the fundamental characteristics of the introduced array are insensitive to various types of substrates. Moreover, its radiation properties have been compared with conventional arrays and better results have been observed. The proposed array appears with a simple design, a low complexity profile, and its attractive broad impedance bandwidth, end-fire radiation mode, wide beam steering, high radiation coverage, and stable characteristics meet the needs of 5G applications in future cellular communications. Additionally, the smartphone array design offers sufficient efficiency when it comes to the appearance and integration of the user’s components. Thus, it could be used in 5G hand-portable devices.

18 July 2023
Verified
Conference Paper
Closed access
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
ASAhmed Sayed
Ahmed Sayed
Chan Hwang SeeChan Hwang See
Chan Hwang See
SESh. Elgohary
Sh. Elgohary
In recent years, there has been significant interest and attention given to wireless power transfer and electromagnetic energy harvesting. This study presents an ultra-wideband (UWB) antenna with improved radiation and metamaterial-based structure for future wireless power transfer systems. Its structure contains a modified CPW-fed monopole antenna resonator with a trapezius-shaped ground plane inspired by an $8\times 8$ metasurface which contains compact metamaterial unit cells. The employed unit cell of the metasurface is in the form of a square ring with a protruded circular ring parasitic structure. Both structures have been implemented in FR4 substrate. The results indicate that the design operates at 2.8-12 GHz, supporting the required spectra coverage (from 3.1 to 10.6 GHz). It has been determined that the suggested design is capable of achieving sufficient frequency response, radiation, and gain levels. The system meets the requirements well for UWB and wireless power transfer systems.

21 July 2022 in Healthcare
Verified
Journal Article
Open access
PDF file
YEYahia Zakrie Elrefaay
Yahia Zakrie Elrefaay
MYMohamed I. Youssef
Mohamed I. Youssef
TNTarek Mahmoud Nasser
Tarek Mahmoud Nasser
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
ASAhmed Sayed
Ahmed Sayed
KMKarim H. Moussa
Karim H. Moussa
The use of information technology and technological medical devices has contributed significantly to the transformation of healthcare. Despite that, many problems have arisen in diagnosing or predicting diseases, either as a result of human errors or lack of accuracy of measurements. Therefore, this paper aims to provide an integrated health monitoring system to measure vital parameters and diagnose or predict disease. Through this work, the percentage of various gases in the blood through breathing is determined, vital parameters are measured and their effect on feelings is analyzed. A supervised learning model is configured to predict and diagnose based on biometric measurements. All results were compared with the results of the Omron device as a reference device. The results proved that the proposed design overcame many problems as it contributed to expanding the database of vital parameters and providing analysis on the effect of emotions on vital indicators. The accuracy of the measurements also reached 98.8% and the accuracy of diagnosing COVID-19 was 64%. The work also presents a user interface model for clinicians as well as for smartphones using the Internet of things.