Mohamed Abdelrahem

Dr. Mohamed Abdelrahem

Technical University of Munich
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 October 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Jose RodriguezJose Rodriguez
Jose Rodriguez
Cristian GarciaCristian Garcia
Cristian Garcia
Andrés MoraAndrés Mora
Andrés Mora
Freddy Flores-BahamondeFreddy Flores-Bahamonde
Freddy Flores-Bahamonde
PAPablo Acuna
Pablo Acuna
Ricardo P. AguileraRicardo P. Aguilera
Ricardo P. Aguilera
The application of model predictive control in electrical drives has been studied extensively in the past decade. This article presents what the authors consider the most relevant contributions published in the last years, mainly focusing on three relevant issues: weighting factor calculation when multiple objectives are utilized in the cost function, current/torque harmonic distortion optimization when the power converter switching frequency is reduced, and robustness improvement under parameters uncertainties. Therefore, this article aims to enable readers to have a more precise overview while facilitating their future research work in this exciting area.

20 October 2021
Verified
Closed access
Jose RodriguezJose Rodriguez
Jose Rodriguez
Cristian GarciaCristian Garcia
Cristian Garcia
Andrés MoraAndrés Mora
Andrés Mora
ADAlireza Davari
Alireza Davari
Jorge RodasJorge Rodas
Jorge Rodas
NMNenad Mijatovic
Nenad Mijatovic
This paper presents the application of Model Predictive Control (MPC) in high-performance drives. A wide variety of machines have been considered: induction machines, synchronous machines, linear motors, switched reluctance motors, and multiphase machines. The control of these machines has been done by introducing minor and easy-to-understand modifications to the basic predictive control concept, showing the high flexibility and simplicity of the strategy. The second part of the paper is dedicated to the performance comparison of MPC with classical control techniques such as field-oriented control and direct torque control. The comparison considers the dynamic behavior of the drive and steady-state performance metrics such as inverter losses, current distortion in the motor, and acoustic noise. The main conclusion is that MPC is very competitive concerning classic control methods by reducing the inverter losses and the current distortion with comparable acoustic noise.

22 June 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Ibrahim HarbiIbrahim Harbi
Ibrahim Harbi
Jose RodriguezJose Rodriguez
Jose Rodriguez
ELEyke Liegmann
Eyke Liegmann
HMHamza Makhamreh
Hamza Makhamreh
MHMarcelo Lobo Heldwein
Marcelo Lobo Heldwein
Ralph KennelRalph Kennel
Ralph Kennel
Model-predictive control (MPC) has emerged as a promising control method in power electronics, particularly for multiobjective control problems such as multilevel inverter (MLI) applications. Over the past two decades, improving the performance of MPC and tackling its technical challenges, such as computational load, modeling accuracy, cost function design, and weighting factor selection, have attracted great interest in power electronics. This article aims to discuss the current state of MPC strategies for MLI applications, describing the significance of each challenge with the reported effective solutions. Through this review, the MPC methods are categorized into two groups: direct MPC (without modulator) and indirect MPC (with modulator). The recent advances of each category are presented and analyzed, focusing on direct MPC as the most applied method for MLI topologies. In addition, some of the important concepts are experimentally validated through a case study and compared under the same operating conditions to evaluate the performance and highlight their features. Finally, the future trends of MPC for MLI applications are discussed based on the current state and reported developments.

17 May 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Mohamed AbdelrahemMohamed Abdelrahem
Mohamed Abdelrahem
Christoph Michael HacklChristoph Michael Hackl
Christoph Michael Hackl
RKRalph Kennel
Ralph Kennel
This paper presents a novel finite position set-phase locked loop (FPS-PLL) for sensorless control of surface-mounted permanent-magnet synchronous generators (PMSGs) in variable-speed wind turbines. The proposed FPS-PLL is based on the finite control set-model predictive control concept, where a finite number of rotor positions are used to estimate the back electromotive force of the PMSG. Then, the estimated rotor position, which minimizes a certain cost function, is selected to be the optimal rotor position. This eliminates the need of a fixed-gain proportional-integral controller, which is commonly utilized in the conventional PLL. The performance of the proposed FPS-PLL has been experimentally investigated and compared with that of the conventional one using a 14.5 kW PMSG with a field-oriented control scheme utilized as the generator control strategy. Furthermore, the robustness of the proposed FPS-PLL is investigated against PMSG parameters variations.

5 May 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MAMohammad Abu-Ali
Mohammad Abu-Ali
FBFelix Berkel
Felix Berkel
MMMaximilian Manderla
Maximilian Manderla
SRSven Reimann
Sven Reimann
Ralph KennelRalph Kennel
Ralph Kennel
Mohamed AbdelrahemMohamed Abdelrahem
Mohamed Abdelrahem
This article presents a computationally efficient and high performing approximate long-horizon model predictive control (MPC) for permanent magnet synchronous motors (PMSMs). Two continuous control set MPC (CCS-MPC) formulations are considered: the classical current tracking delta MPC (Del-MPC) and the torque tracking economic MPC (EMPC). To achieve offset-free torque tracking under model uncertainties and in all regions of operation, a disturbance observer and a dq -current reference generator are used. To enable real-time implementation of the long-horizon CCS-MPC, the development of a real-time capable solver is not required, since MPC approximation based on deep neural networks (DNNs) is considered and utilized for controller’s evaluation at run time. The approximation is done by training the DNN to learn the MPC functionality based on offline-generated training data and in an open-loop manner. The robust and offset-free tracking performance of the proposed DNN-based approximate long-horizon Del-MPC and EMPC has been validated through simulation and real-time implementation at test bench and compared to the state-of-the-art field oriented control (FOC) using internal model controller with field-weakening (FW) part and to the exact short-horizon MPC based on the fast gradient method (FGM-MPC). Results show that the long-horizon MPC can achieve significantly faster torque transient responses in comparison with the short-horizon FGM-MPC and the conventional FOC, especially in FW region.

25 August 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Mohamed AbdelrahemMohamed Abdelrahem
Mohamed Abdelrahem
Christoph Michael HacklChristoph Michael Hackl
Christoph Michael Hackl
ZZZhenbin Zhang
Zhenbin Zhang
RKRalph Kennel
Ralph Kennel
In this paper, an extended Kalman filter (EKF) is employed to estimate stator currents, rotor speed, rotor position, and mechanical torque of a direct-driven surface-mounted permanent-magnet synchronous generator (PMSG) based variable-speed wind turbine systems controlled by a robust predictive deadbeat (DB) algorithm. Therefore, the flux-oriented control of the PMSG is realized without mechanical sensors (i.e., no position encoders or speed transducers). The estimated stator currents are fed back to the prediction model in order to compensate the one-step delay caused by the digital controller and to reduce the total harmonic distortion of the stator currents. Thus, the torque ripples are also reduced. Furthermore, a simple disturbance observer is presented, which estimates the perturbations caused by parameter variations of the PMSG or by any unmodeled dynamics in order to enhance the robustness of the proposed DB algorithm. The proposed scheme is experimentally validated using a 14.5-kW PMSG and a dSPACE DS1007 real-time platform. Its performance is compared with that of the conventional DB control strategy for all operation conditions and under parameter variations of the PMSG.