20 October 2021 in IEEE Transactions on Power Electronics
The application of model predictive control in electrical drives has been studied extensively in the past decade. This article presents what the authors consider the most relevant contributions published in the last years, mainly focusing on three relevant issues: weighting factor calculation when multiple objectives are utilized in the cost function, current/torque harmonic distortion optimization when the power converter switching frequency is reduced, and robustness improvement under parameters uncertainties. Therefore, this article aims to enable readers to have a more precise overview while facilitating their future research work in this exciting area.
7 November 2013 in Journal of Applied Physics
A homogenization method to model a stack of second generation High Temperature Superconducting tapes under AC applied transport current or magnetic field has been obtained. The idea is to find an anisotropic bulk equivalent for the stack such that the geometrical layout of the internal alternating structures of insulating, metallic, superconducting, and substrate layers is “washed” out while keeping the overall electromagnetic behavior of the original stack. We disregard assumptions upon the shape of the critical region and use a power law E–J relationship allowing for overcritical current densities to be considered. The method presented here allows for a computational speedup factor of up to 2 orders of magnitude when compared to full 2-D simulations taking into account the actual dimensions of the stacks without compromising accuracy.
22 February 2010 in Superconductor Science and Technology
28 July 2021 in IEEE Transactions on Industrial Electronics
Virtual synchronous generator (VSG), recognized as a grid-friendly control technique, contributes to providing inertia and damping support from the grid-tied power electronic systems. However, similar to the conventional synchronous generator, the VSG is vulnerable to wideband oscillations and can even become unstable when the system is subjected to a variety of disturbances. To tackle this issue, this article proposes a magnitude-phase motion equation (MPME) for grid-forming VSG attached to a weak grid. Besides, a feedback analytical method is introduced to identify the frequency dynamic stability, judged by the sign of ( dω / dt )/ δω . Besides, the rate of change of frequency (RoCoF) and frequency nadir (FN) are evaluated by the two indices, i.e., dω / dt and δω . In addition, the relationship between the low-inertia-RoCoF-FN-related stability and the weak-damping-oscillation-related stability is illustrated by the feedback analysis. Moreover, in the framework of MPME, a reactive-power feedforward (RPFF) decoupling control strategy is proposed for the enhancement of stability and robustness performance of the VSG system. Finally, the proposed modeling and the RPFF decoupling control strategy are demonstrated with the experiments.
17 December 2010 in IEEE Transactions on Applied Superconductivity
VRV. M. Rodriguez-Zermeno
+2
This work presents a method to simulate the electromagnetic properties of superconductors with high aspect ratio such as the commercially available second generation superconducting YBCO tapes. The method is based on a multiscale representation for both thickness and width of the superconducting domains. A couple of test cases were successfully simulated and further investigations were made by means of structured (mapped) meshes. Here, large aspect ratio elements were used to simulate thin material layers with a reduced number of elements. Hence, more complex geometries can be studied at considerable lower computational time. Several test cases were simulated including transport current, externally applied magnetic field and a combination of both. The results are in good agreement with recently published numerical simulations. The computational time to solve the present multiscale approach in 2D is estimated as two orders of magnitude faster than other 2D methods.