Mongkol Kaewbumrung

Dr. Mongkol Kaewbumrung

Rajamangala University of Technology Suvarnabhumi, Ayutthaya, Thailand
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2019 in Aerospace
Verified
Journal Article
Open access
PDF file
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung
WTWorapol Tangsopa
Worapol Tangsopa
Jatuporn ThongsriJatuporn Thongsri
Jatuporn Thongsri
A gas turbine power plant in Thailand had the problem of compressor blade fracture in Stages 6–8, which was caused by housing damage. This gas turbine has a total of 15 stages. The housing damage reduced the lifetime of blades to an unacceptable level. This article shall report the solution and outcomes. Three-dimensional (3D) compressor blade models in the problematic stages were prepared by a 3D scanning machine to find a solution based on computational fluid dynamics (CFD), and then were completed for simulation by adding Stages 5 and 9 to become a multi-stage axial model. The latter models were modified by trimming the trailing edge by 1-, 5-, and 10-mm. Using ANSYS CFX R19.2 software, the CFD results of the trailing edge modification effect on flow using the shear stress transport (SST) k-ω turbulence model revealed aerodynamics inside the problematic stages both before and after blade modifications. Modifying the blade by 5 mm was suitable, because it had lesser effects on aerodynamic parameters: pressure ratio, drag, and lift coefficients, when compared to the modification of 10 mm. The larger the modification, the greater the effect on aerodynamics. The effects on aerodynamics were intensified when they were modified by 10 mm. The validation of base line blades was conducted for the overall compressor parameters that were compared with the measurable data. These results were accepted and gave positive feedbacks from engineers who practically applied our reports in a real maintenance period of gas turbine.

1 August 2018 in International Journal of Differential Equations
Verified
Journal Article
Open access
PDF file
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung
SOSomsak Orankitjaroen
Somsak Orankitjaroen
Pichit BoonkrongPichit Boonkrong
Pichit Boonkrong
BNBuraskorn Nuntadilok
Buraskorn Nuntadilok
BWBenchawan Wiwatanapataphee
Benchawan Wiwatanapataphee
A mathematical model of dispersed bioparticle-blood flow through the stenosed coronary artery under the pulsatile boundary conditions is proposed. Blood is assumed to be an incompressible non-Newtonian fluid and its flow is considered as turbulence described by the Reynolds-averaged Navier-Stokes equations. Bioparticles are assumed to be spherical shape with the same density as blood, and their translation and rotational motions are governed by Newtonian equations. Impact of particle movement on the blood velocity, the pressure distribution, and the wall shear stress distribution in three different severity degrees of stenosis including 25%, 50%, and 75% are investigated through the numerical simulation using ANSYS 18.2. Increasing degree of stenosis severity results in higher values of the pressure drop and wall shear stresses. The higher level of bioparticle motion directly varies with the pressure drop and wall shear stress. The area of coronary artery with higher density of bioparticles also presents the higher wall shear stress.

7 April 2022 in Fluids
Verified
Journal Article
Open access
PDF file
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung
ACAkapak Charoenloedmongkhon
Akapak Charoenloedmongkhon
Heat transfer engineering is significant in many applications, especially in buoyancy natural convection in concentric and eccentric cavities. The biggest practical challenges, in this context, are capturing the self-natural flow, estimating the mixing performance, and determining what parameters affect the temperature distribution in the cavity. In this paper, we focus on the improvement of a mathematical model, in order to enhance the accuracy of the solution, by investigating a new source term in the SST k−ω turbulence model based on the finite volume technique. The commercial numerical simulation software ANSYS Fluent 2021R1 is implemented to validate the accuracy. A concentric cavity was chosen for validation, the obtained temperature profiles at θ=0°, θ=30°, θ=60°, θ=90°, θ=120°, θ=150°, and θ=180° were compared with previous experimental data. We applied this model to four eccentric rotating scenarios, including inner counterclockwise rotation, outer counterclockwise rotation, inner–outer clockwise rotation, and inner clockwise–outer counterclockwise rotation. The numerical simulation results reveal that the new source term in the momentum equation can produce superior results in the concentric test-case. The proposed mathematical model can describe the heat transfer under the eccentric co-rotation scenario well. Furthermore, the results for eccentric cases confirm that the rotational direction affects the mixing temperature by generating a large vortex in the cavity, which increases the temperature mixing performance.

1 January 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
CPChalermpol Plengsa-Ard
Chalermpol Plengsa-Ard
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung

16 April 2021 in Processes
Verified
Journal Article
Open access
PDF file
Thodsaphon JansaengsukThodsaphon Jansaengsuk
Thodsaphon Jansaengsuk
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung
WBWutthikrai BUSAYAPORN
Wutthikrai BUSAYAPORN
Jatuporn ThongsriJatuporn Thongsri
Jatuporn Thongsri
To solve the housing damage problem of a fractured compressor blade (CB) caused by an impact on the inner casing of a gas turbine in the seventh stage (from 15 stages), modifications of the trailing edge (TE) of the CB have been proposed, namely 6.5 mm curved cutting and a combination of 4 mm straight cutting with 6.5 mm curved cutting. The simulation results of the modifications in both aerodynamics variables Cl and Cd and the pressure ratio, including structural dynamics such as a normalized power spectrum, frequency, total deformation, equivalent stress, and the safety factor, found that 6.5 mm curved cutting could deliver the aerodynamics and structural dynamics similar to the original CB. This result also overcomes the previous work that proposed 5.0 mm straight cutting. This work also indicates that the operation of a CB gives uneven pressure and temperature, which get higher in the TE area. The slightly modified CB can present the difference in the properties of both the aerodynamics and the structural dynamics. Therefore, any modifications of the TE should be investigated for both properties simultaneously. Finally, the results from this work can be very useful information for the modification of the CB in the housing damage problem of the other rotating types of machinery in a gas turbine power plant.

28 February 2020 in ECTI Transactions on Electrical Engineering, Electronics, and Communications
Verified
Journal Article
Open access
PDF file
LPLamai Puangburee
Lamai Puangburee
WBWutthikrai BUSAYAPORN
Wutthikrai BUSAYAPORN
Mongkol KaewbumrungMongkol Kaewbumrung
Mongkol Kaewbumrung
Jatuporn ThongsriJatuporn Thongsri
Jatuporn Thongsri
Low-Cost Automation (LCA) line, a group of machines to manufacture hard disk drive’s components located inside a clean room of factory, confronted with a problem of particle contamination caused by improper ventilation system. This article aims to evaluate airflow and proposes solutions to improve the ventilation system of LCA line based on Computational Fluid Dynamics (CFD). By using actual operating conditions collected at the factory and Fluent CFD software, the simulation showed that airflow patterns in such areas were substandard. For example, the large areas of vortex with the air velocities were lower than 0.2 m/s in critical areas: Fan Filter Units’ conveyor and Work Area. The low velocity of the airflow may cause the particle contamination and leads to the low-quality products. To reduce the particle contamination, we suggested novel solutions to the contamination problem. The CFD results revealed that our suggestions by increasing the momentum source (Sm) and/or redesign the LCA’s model by extending its height of cover where the increasing of Sm represented the increment of air velocity released from sources to the optimal values exhibited the decreasing of the vortex areas and also improved the air velocities in the critical areas to meet the factory’s standard.