Permanent magnet (PM) machines have broad applicability and a rapid output rise due to their good power factor, high efficiency, and power density. However, with the recent high cost, unavailability, and demagnetization issues of PMs, the wound rotor synchronous machine (WRSM) is a better substitute for permanent magnet machines for various applications in terms of price value and controllability. While the WRSM contains issues such as regular maintenance and replacement of brushes and slip rings, this paper introduces a brushless WRSM (BL-WRSM)with concentrated winding having 36 slots and 48 poles, which generates fundamental component and a dominant sub-harmonic component of magneto motive force (MMF). To achieve the brushless operation, the rotor has an additional winding called excitation winding that is connected with the main field winding via a rectifier. This additional winding is used to induce the electromotive force (EMF) by the sub-harmonic MMF component of the stator. The EMF is converted to DC by the rectifier and fed to the main field winding. This BL-WRSM has been developed for dual-speed applications such as washing machines. The machine has been tested for 46 rpm and 1370 rpm. The low-speed mode is for washing and the high-speed mode is for drying clothes. To validate the performance and feasibility, an outer rotor BL-WRSM is designed. The performance was compared with the conventional WRSM (C-WRSM). 2-D finite element analysis (FEA) simulation was conducted using ANSYS Electromagnetic.
This paper proposes a special design of a dual stator radial type permanent magnet vernier machine (PMVM) having a yokeless rotor to improve the torque density. The PMVM model is designed with winding only in the outer stator, while the inner stator is kept auxiliary without winding. The proposed model reduced the overall volume of the machine, which in turn improved the torque density of the machine. The proposed configuration makes the design free from thermal and manufacturing issues due to the absence of inner stator winding. The detailed specifications and analysis results of the proposed model, such as torque, back EMF, inductance, and other features, are presented in this paper. The model is analyzed and compared with the dual stator radial type PMVM having a yokeless rotor and dual stator winding using the 2D-Finite Element Method (FEM) as well as 3D Co-simulation with Ansys Mechanical.
This paper introduces a topology for achieving the brushless operation of a wound rotor vernier motor using a single-phase additional winding on the stator, specifically designed for variable-speed applications e.g., washing machines. In the proposed topology, the stator winding consists of two sets: a four-pole three-phase main winding and an additional two-pole single-phase winding. On the other hand, the rotor contains a 44-pole field winding to generate the vernier effect, and a two-pole excitation winding for induction. The main winding of the stator produces the fundamental component of MMF, while the additional winding generates the subharmonics component of MMF to induce a current in the excitation winding of the rotor. The excitation winding is connected to a rotating rectifier to supply direct current to the rotor’s field winding. The field interaction of the main and field winding is responsible for the production of torque. The presence of a subharmonic component of MMF in the air gap is confirmed through Fourier analysis of MMF obtained from the winding function. Moreover, the brushless operation of the proposed topology is validated using 2D finite element analysis (FEM) for variable speed application.
This research aims to develop an intelligent framework for quality control and fault detection in pre-production and post-production systems in Industry 4.0. In the pre-production system, the health of the manufacturing machine is monitored. In this study, we examine the gear system of induction motors used in industries. In post-production, the product is tested for quality using a machine vision system. Gears are fundamental components in countless mechanical systems, ranging from automotive transmissions to industrial machinery, where their reliable operation is vital for overall system efficiency. A faulty gear system in the induction motor directly affects the quality of the manufactured product. Vibration data, collected from the gear system of the induction motor using vibration sensors, are used to predict the motor’s health condition. The gear system is monitored for six different fault conditions. In the second part, the quality of the final product is inspected with the machine vision system. Faults on the surface of manufactured products are detected, and the product is classified as a good or bad product. The quality control system is developed with different deep learning models. Finally, the quality control framework is validated and tested with the evaluation metrics.
This paper presents the design and performance analysis of a brushless wound rotor vernier machine (BLWRVM) for variable speed applications, particularly in the context of domestic appliances like automatic washing machines which have two cycles of operation: the wash cycle at low-speed and dry-cycle at high-speed. The proposed BLWRVM utilizes a different winding configuration that enhances the performance compared to the existing reference machine. The machine topology uses a dual winding setup on the stator, a 3-phase main ABC1 winding and a 1-phase additional A2 winding on the stator, specifically engineered to generate both fundamental and subharmonic components of MMF in the airgap of the machine. In order to achieve the brushless operation, the additional excitation winding is placed on the rotor which is connected through a rectifier to the field winding. The voltages are induced in this excitation winding using the MMF’s sub-harmonic component. These AC-induced voltages are rectified by a rotating rectifier placed on the rotor periphery and are then supplied to the main field winding. A 4-pole, 24-slot stator and 44-pole 44-slot outer rotor machine is designed. The fill factor of the machine’s stator slot was then increased to 35% and the rotor’s slot fill factor was increased to 30%. Furthermore, different skew angles of the rotor were analyzed to find the optimal skew angle that yields minimum torque ripple. The performance characteristics were compared with a reference BLWRVM. To validate the design a 2D-FEA was carried out to find out the performing characteristics of the proposed machine and reference machines using ANSYS Electromagnetic suite version 2022 R1.
Permanent magnet vernier machines (PMVM) are recently proven to be a good candidate for extended-speed operation in the constant power region. In this paper, a dual-airgap PMVM having a yokeless rotor has been presented for extended-speed operation. The PMVM model is designed with two stators and a sandwiched rotor without an iron yoke. To achieve the extended speed operation, the yokeless structure of dual airgap PMVM benefits from the increased inductance which makes it possible to operate at higher speeds. For this purpose, the prototype of this machine is built, and experimental testing is performed to verify its performance in a constant power region. Electromagnetic performance such as back EMF and output torque at high speeds are analyzed. The experimental results are compared with those obtained using finite element analysis which confirms the ability of dual airgap PMVM having a yokeless rotor to perform well at higher speeds in a constant power region.