Kapeel Kumar

Mr. Kapeel Kumar

School of Robotics and Advanced Manufacture, Harbin Institute of Technology (Shenzhen), Shenzhen, Guangdong, China
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2025 in IEEE Access
Verified
Journal Article
Open access
Kapeel KumarKapeel Kumar
Kapeel Kumar
QAQasim Ali
Qasim Ali
SASheeraz Ahmed Ahmed
Sheeraz Ahmed Ahmed
MHMuhammad Humza
Muhammad Humza
AMAbdul Aziz Memon
Abdul Aziz Memon
Mudasir Raza SiddiqiMudasir Raza Siddiqi
Mudasir Raza Siddiqi
This paper presents the design and performance analysis of a brushless wound rotor vernier machine (BLWRVM) for variable speed applications, particularly in the context of domestic appliances like automatic washing machines which have two cycles of operation: the wash cycle at low-speed and dry-cycle at high-speed. The proposed BLWRVM utilizes a different winding configuration that enhances the performance compared to the existing reference machine. The machine topology uses a dual winding setup on the stator, a 3-phase main ABC1 winding and a 1-phase additional A2 winding on the stator, specifically engineered to generate both fundamental and subharmonic components of MMF in the airgap of the machine. In order to achieve the brushless operation, the additional excitation winding is placed on the rotor which is connected through a rectifier to the field winding. The voltages are induced in this excitation winding using the MMF’s sub-harmonic component. These AC-induced voltages are rectified by a rotating rectifier placed on the rotor periphery and are then supplied to the main field winding. A 4-pole, 24-slot stator and 44-pole 44-slot outer rotor machine is designed. The fill factor of the machine’s stator slot was then increased to 35% and the rotor’s slot fill factor was increased to 30%. Furthermore, different skew angles of the rotor were analyzed to find the optimal skew angle that yields minimum torque ripple. The performance characteristics were compared with a reference BLWRVM. To validate the design a 2D-FEA was carried out to find out the performing characteristics of the proposed machine and reference machines using ANSYS Electromagnetic suite version 2022 R1.

22 April 2025 in Machines
Verified
Journal Article
Open access
PDF file
SASheeraz Ahmed Ahmed
Sheeraz Ahmed Ahmed
QAQasim Ali
Qasim Ali
Ghulam Jawad SirewalGhulam Jawad Sirewal
Ghulam Jawad Sirewal
Kapeel KumarKapeel Kumar
Kapeel Kumar
Gilsu ChoiGilsu Choi
Gilsu Choi
This paper proposes a hybrid brushless wound-rotor synchronous machine (HB-WRSM) with an outer rotor topology that can operate as a permanent magnet synchronous machine (PMSM), as well as an HB-WRSM. In the first part, the existing brushless wound-rotor synchronous machine (BL-WRSM) is modified into a hybrid model by introducing permanent magnets (PMs) in the rotor pole faces to improve the magnetic field strength and other performance variables of the machine. In the second part, a centrifugal switch is introduced, which can change the machine operation from HB-WRSM to PMSM. The proposed machine uses an inner stator, outer rotor model with 36 stator slots and 48 poles, making the stator winding a concentrated winding. The HB-WRSM is utilized for dual-speed applications such as washing machines that run at low speed (46 rpm) and high speed (1370 rpm). For high speed, to have a better efficiency and less torque ripple, the machine is switched to PMSM mode using a centrifugal switch. The results are compared with the existing BL-WRSM. A 2D model is simulated using ANSYS Electromagnetics Suite to validate the machine model and performance.

19 June 2025
Verified
Conference Paper
Closed access
Kapeel KumarKapeel Kumar
Kapeel Kumar
QAQasim Ali
Qasim Ali
MAMuhammad R. Altimania
Muhammad R. Altimania
SASheeraz Ahmed
Sheeraz Ahmed
HMHafiz Mudassir Munir
Hafiz Mudassir Munir
This research examines two types of brushless hybrid vernier machines. One is BL-H-SPMVM utilizing surface permanent magnets and second is BL-H-IPMVM using interior permanent magnets for variable-speed washing machine application. The rotors of these machines include field windings and permanent magnets to function without requiring any slip rings or brushes. A thorough examination of motors includes electromagnetic design, operational principles and uses finite element analysis (FEA) to evaluate performance. The BL-H-SPMVM generates superior back EMF and average torque and reduced torque ripple throughout low (524 rpm) and high (1200 rpm) speeds better than the BL-H-IPMVM. The research analyzes how rotor skewing reduces torque ripple and shows that subharmonic brushless excitation maintains rotor field current effectively. The study confirms that BL-H-SPMVM can provide an efficient and dependable technical solution for speedvariable household appliances like washing machines.

19 June 2025
Verified
Conference Paper
Closed access
MAMudassir Ahmed
Mudassir Ahmed
MAMumtaz Ali
Mumtaz Ali
FAFares Suliaman Alromithy
Fares Suliaman Alromithy
NANoraiz Akhtar
Noraiz Akhtar
HMHafiz Mudassir Munir
Hafiz Mudassir Munir
QAQasim Ali
Qasim Ali
This paper presents the design and performance evaluation of a Brushless Hybrid Rotor Synchronous Machine (BL-HRSM) that combines surface-mounted permanent magnets, and brushless rotor excitation for enhanced torque production and reliability. The proposed machine employs dual stator windings- 8 -pole and 2-pole-fed by a single inverter to generate fundamental and sub-harmonic MMF components. These harmonics enable brushless excitation of the rotor field winding without the use of slip rings and brushes. The rotor structure includes both field windings and permanent magnets arranged to follow a series magnetic flux path. Finite element analysis (FEA) is used to assess torque output and other electromagnetic behavior. Results show that the proposed BLHRSM achieves higher average torque compared to a conventional BL-WRSM, with torque ripple significantly reduced through rotor skewing. The study validates the effectiveness of hybrid excitation, making the BL-HRSM a strong candidate for high-performance, cost-sensitive brushless drive applications.

13 June 2025 in IEEE Access
Verified
Journal Article
Open access
Kapeel KumarKapeel Kumar
Kapeel Kumar
QAQasim Ali
Qasim Ali
SASheeraz Ahmed Ahmed
Sheeraz Ahmed Ahmed
MIMuhammad Ilyas
Muhammad Ilyas
HZHanlin Zhan
Hanlin Zhan
Mudasir Raza SiddiqiMudasir Raza Siddiqi
Mudasir Raza Siddiqi
This paper presents the optimized design and electromagnetic performance analysis of a brushless hybrid wound rotor vernier motor (BL-HWRVM) for automatic washing machine applications. The automatic washing machine has two operating cycles: the wash cycle at low speed and the spin dry cycle at high speed. The proposed machine utilizes a different winding configuration that improves the performance as compared to the existing reference machine. The machine configuration utilizes two different windings on the stator. One is a three-phase main ABC winding, and the other is a single-phase additional X winding. Both windings are designed in such a way that they generate both fundamental and subharmonic components of MMF in the air gap of the machine. In order to excite the rotor field winding using a brushless excitation technique, an additional excitation winding is placed on the rotor, which is connected through a rotating rectifier to the field winding. The voltages are induced in this excitation winding using the sub-harmonic component of the MMF. These AC-induced voltages are rectified by a rotating rectifier and are then fed to the field winding. A 4-pole-24-slot stator and 44-pole-44-slot outer rotor motor is designed. To reduce the torque ripple in the BL-WRVM 3-degree of skew angle is implemented on the rotor. To improve the value of average torque, a new hybrid model is designed and proposed by placing small magnets on the rotor. To find out the optimal shape of the magnets, the Genetic algorithm optimization technique is used. Finally, the performance of all the designs is compared. The proposed BL-HWRVM demonstrates a 9.47% efficiency improvement in washing mode and an 11.84% efficiency improvement in spin-dry mode compared to the reference machines.

19 June 2025
Verified
Conference Paper
Closed access
SASajad Ali
Sajad Ali
Kapeel KumarKapeel Kumar
Kapeel Kumar
FAFares Suliaman Alromithy
Fares Suliaman Alromithy
MAMohammad R. Altimania
Mohammad R. Altimania
QAQasim Ali
Qasim Ali
HMHafiz Mudassir Munir
Hafiz Mudassir Munir
The rising demand for high-performance and efficient electric drive systems in E-bikes has intensified the need for optimized motor designs that balance torque density, low ripple, and energy efficiency. Spoke-type Interior Permanent Magnet Synchronous Motors (IPMSMs) offer a promising solution due to their superior torque characteristics; however, they inherently suffer from high torque ripple and harmonic distortions that lead to undesirable noise and vibration. This study addresses the challenge of minimizing torque ripples while enhancing average torque output in spoke-type IPMSMs. Finite Element Analysis (FEA) is employed to evaluate and compare three configurations-Base Model, Optimized Model (via genetic algorithm-based geometric refinement), and Optimized Skewed Model (with rotor skewing). Simulations analyze back EMF waveforms, harmonic spectra, flux distribution, and torque profiles. The Optimized Skewed design achieves the highest average torque (2.223 Nm) with the lowest torque ripple (1.92 %), compared to the Reference Model (2.089 Nm, 3.16% ripple). Harmonic analysis confirms minimal trade-offs in THD (<5%) for significantly improved performance. The study concludes that integrating design optimization with rotor skewing effectively enhances electromagnetic performance, reduces torque ripple, and contributes to quieter, smoother E-bike operation.