The present article relates to the description of phenomenological relations of amorphous material behavior within the framework of viscoelasticity and elastic-viscoplasticity theory, as well as to the creation of its digital analog. Ultra-high-molecular-weight polyethylene (UHMWPE) is considered in the study. The model is based on the results of a series of experimental studies. Free compression of cylindrical specimens in a wide range of temperatures [−40; +80] °C and strain rates [0.1; 4] mm/min was performed. Cylindrical specimens were also used to determine the thermal expansion coefficient of the material. Dynamic mechanical analysis (DMA) was performed on rectangular specimens using a three-point bending configuration. Maxwell and Anand models were used to describe the material behavior. In the framework of the study, the temperature dependence of a number of parameters was established. This influenced the mathematical formulation of the Anand model, which was adapted by introducing the temperature dependence of the activation energy, the initial deformation resistance, and the strain rate sensitivity coefficient. Testing of the material models was carried out in the process of analyzing the deformation of a spherical bridge bearing with a multi-cycle periodic load. The load corresponded to the movement of a train on a bridge structure, without taking into account vibrations. It is shown that the viscoelastic model does not describe the behavior of the material accurately enough for a quantitative analysis of the stress–strain state of the structure. It is necessary to move on to more complex models of material behavior to minimize the discrepancy between the digital analog and the real structure; it has been established that taking into account plastic deformation while describing UHMWPE would allow this to be performed.
The present article relates to the description of phenomenological relations of amorphous material behavior within the framework of viscoelasticity and elastic-viscoplasticity theory, as well as to the creation of its digital analogue. Ultra-high-molecular-weight polyethylene (UHMWPE) is considered in the study. The model is based on the results of a series of experimental studies. Free compression of cylindrical specimens in a wide range of temperatures [-40; +80] °C and strain rates [0.1; 4] mm/min was performed. Cylindrical specimens were also used to determine the thermal expansion coefficient of the material. Dynamic mechanical analysis (DMA) was performed on rectangular specimens using a three-point bending configuration. Maxwell and Anand models were used to describe the material behavior. In the framework of the study, a temperature dependence of a number of parameters was established. This influenced the mathematical formulation of the Anand model, which was adapted by introducing the temperature dependence of the activation energy, the initial deformation resistance, and the strain rate sensitivity coefficient. Testing of the material models was carried out in the process of analyzing the deformation of a spherical bridge bearing by a multi-cycle periodic load. The load corresponds to the movement of a train on a bridge structure, without taking into account vibrations. It is shown that the viscoelastic model does not describe the behavior of the material accurately enough for quantitative analysis of the stress-strain state of the structure. It is necessary to move on to more complex models of material behavior to minimize the discrepancy between the digital analogue and the real structure. It is established that taking into account plastic deformation while describing UHMWPE allows this to be done.
Contact polymer-grease pairs of materials are widely used in highly loaded friction units. However, modeling the joint mechanical deformation of polymer grease significantly increases computational costs and complicates the convergence of the numerical solution. This is due to the pronounced nonlinear behavior of the materials and the significant difference in their physical and mechanical characteristics. Modeling the behavior of complex spatial configurations of structures, taking into account temperature and time factors, and investigating the behavior of structures in dynamics challenges researchers and engineers with the task of reducing computational costs for numerical experiments without loss of accuracy. Therefore, it is of high importance to form methods and approaches for describing effective characteristics, taking into account the nonlinear behavior of a polymer-grease pair of materials. Representing the design volumes of polymer grease as an equivalent medium can reduce computational costs. This paper considers the design volume, including a polymer base made of ultrahigh-molecular-weight polyethylene and a spherical recess filled with CIATIM-221 grease. The modified elastic-viscoplastic Anand model has been used to describe the behavior of materials and an equivalent medium. The model parameters have been determined based on a set of numerical experiments at various temperatures, deformation rates, and sizes of the design volume. The effective elastic and viscoplastic characteristics of the equivalent medium have been determined. An increase in temperature leads to a decrease in stiffness and resistance to viscoplastic flow. Increasing the size of the design volume helps to stabilize effective characteristics and reduce the impact of local structural heterogeneities. The proposed analytical dependencies make it possible to take into account the influence of temperature and the geometry of the design volume when determining the parameters of an equivalent medium. The developed approach can be used in finite element modeling of large structures with friction units to reduce computational costs without explicitly modeling the polymer-grease interface.
Contact polymer–grease pairs of materials are widely used in highly loaded friction units. However, modeling the joint mechanical deformation of polymer grease significantly increases computational costs and complicates the convergence of the numerical solution. This is due to the pronounced nonlinear behavior of the materials and the significant difference in their physical and mechanical characteristics. Modeling the behavior of complex spatial configurations of structures, taking into account temperature and time factors, and investigating the behavior of structures in dynamics challenges researchers and engineers with the task of reducing computational costs for numerical experiments without loss of accuracy. Therefore, it is of great importance to design methods and approaches for describing effective characteristics, taking into account the nonlinear behavior of a polymer–grease pair of materials. Representing the design volumes of polymer grease as an equivalent medium can reduce computational costs. This paper considers the design volume, including a polymer base made of ultrahigh-molecular-weight polyethylene and a spherical recess filled with CIATIM-221 grease. The modified elastic–viscoplastic Anand model has been used to describe the behavior of materials and an equivalent medium. The model parameters have been determined based on a set of numerical experiments at various temperatures, deformation rates, and sizes of the design volume. The effective elastic and viscoplastic characteristics of the equivalent medium have been determined. An increase in temperature leads to a decrease in stiffness and resistance to viscoplastic flow. Increasing the size of the design volume helps to stabilize effective characteristics and reduce the impact of local structural heterogeneities. The proposed analytical dependencies make it possible to take into account the influence of temperature and the geometry of the design volume when determining the parameters of an equivalent medium. The developed approach can be used in finite element modeling of large structures with friction units to reduce computational costs without explicitly modeling the polymer–grease interface.