Mustafa Taha ASLAN

Dr. Mustafa Taha ASLAN

Karadeniz Technical University, Graduate School of Natural and Applied Sciences, Karadeniz Technical University, Trabzon, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2024 in Turkish Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN
Erol İskenderErol İskender
Erol İskender
AAAtakan Aksoy
Atakan Aksoy
Modification of asphalt mixtures has become almost mandatory today due to increased stresses in pavements, shortening of load cycle times, and decreases in binder quality. For this reason, many additives can be added to bitumen or asphalt mixture. Industrial material wastes can also be among these additives. When diatomite material is used as a performance enhancer in asphalt mixtures, it significantly improves the main performance indicators of the asphalt mixture. However, low temperature cracking of diatomite-modified asphalt mixtures is still controversial in the literature. This study evaluated the asphalt mixture in terms of low-temperature cracking, water damage, and rutting, depending on the diatomite grinding size (gradation) and addition ratio. Three different sizes of diatomite additives (106, 212 and 300-micron maximum diameter) were used at three addition ratios (5, 10 and 15% by weight of bitumen). According to the test results, it was seen that the mechanical properties of asphalt mixtures were significantly affected by the addition ratios and diatomite sizes, and the use of 300-micron maximum diameter diatomite at the rate of 10% and 15% was more effective. However, according to the BBR test results, the use of diatomite additives with a maximum size of 106 µm at 5% slightly increased the low temperature cracking resistance.

31 March 2024 in Journal of Construction Engineering, Management & Innovation
Verified
Journal Article
Closed access
AUAtaturk University
Ataturk University
MKMerve Kasapoglu
Merve Kasapoglu
YEYeliz Duygu Ercek
Yeliz Duygu Ercek
YUYuzuncu Yil University
Yuzuncu Yil University
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN
KUKaradeniz Technical University
Karadeniz Technical University

16 December 2023 in Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
Verified
Journal Article
Closed access
AAAtakan Aksoy
Atakan Aksoy
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN
Erol İskenderErol İskender
Erol İskender
DADündar Ayyildiz
Dündar Ayyildiz
CŞCelaleddin Ensar Şengül
Celaleddin Ensar Şengül
The majority of steel and reinforced concrete bridges are produced with asphalt pavement. The reason for this is to protect steel and concrete structures from the effects of water and degrading salt additives and to increase their durability. Asphalt bridge superstructures are mostly manufactured with four layers. These layers are the primer bonding layer, waterproofing layer, protection layer and surface asphalt wearing layers. The superstructure must protect the supporting substructure. It should protect the life of the structure and ensure the integrity of the structure against permanent deformation, aging, raveling, water damage and chemical effects. Diatomite additive is used as a performance enhancer in various aspects. It is generally preferred in the region of 5%-15% according to the bitumen mass. The granulometric size and chemical properties of the diatomite additive are other effective factors. In this study, the rutting resistance of conventional and diatomite-modified asphalt pavement for 5% and 10% ratios for selected diatomite additive gradation is investigated. The rutting resistance of the pavements is investigated by repeated creep tests for two different additive ratios on water-damaged and control mixtures. In unconditioned samples, 5% diatomite-modified mixtures; in conditioned samples, 10% diatomite-modified mixtures showed the greatest deformation resistance.

5 March 2024 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
HSHalime Solak
Halime Solak
Erol İskenderErol İskender
Erol İskender
AAAtakan Aksoy
Atakan Aksoy
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN

30 June 2023 in Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
NANazlı Gül ARAZ
Nazlı Gül ARAZ
AAAtakan Aksoy
Atakan Aksoy
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN
Erol İskenderErol İskender
Erol İskender
Asfalt kaplamaların sıkıştırma sıcaklığının kontrol altına alınması kaplamadan beklenen performansın sağlanması açısından en önemli konulardan birisidir. Tasarım ve üretim aşamalarında ne kadar dikkat edilse de serme ve sıkıştırma aşamalarında karışım sıcaklığında bir miktar homojensizlikler ortaya çıkabilmektedir. Bu çalışmada aşınma tabakası tip 1A’ya göre dizayn edilmiş yoğun gradasyonlu asfalt kaplamalar için optimum bitüm içeriği %5,1 olarak hesaplanmış, bu değerinin altında ve üstünde (4,8; 4,9; 5,0; 5,0; 5,2; 5,3; 5,4) bitüm oranlarında hazırlanan asfalt karışımlar 143 °C ve 137 °C sıkıştırma sıcaklığında imal edilmiştir. Asfalt karışım örnekleri pratik yoğunluk, akma, stabilite ve Marshall oranı parametreleri ile değerlendirilmiştir. Çalışma sonucunda, 143 °C sıkıştırma sıcaklığında 137 °C’ye göre daha yüksek Marshall stabilite değerlerinin elde edilebildiği, optimum bitüm oranından daha yüksek artan değerlerde bitüm oranının artmasıyla akma değerlerinin artmakta olduğu ve 143 °C sıkıştırma sıcaklığında 137 °C değerine göre daha düşük akma değerleri oluştuğu gözlemlenmiştir. Stabilite değerlerindeki standart hatanın 143 °C sıcaklıkta daha düşük olduğu, sıkıştırma işlemi yapılırken, homojenlik anlamında, düşük sıcaklıklarda daha çok dikkat edilmesi gerektiği anlaşılmıştır.

3 September 2026 in Polymers
Verified
Journal Article
Open access
PDF file
Mustafa Taha ASLANMustafa Taha ASLAN
Mustafa Taha ASLAN
Erol İskenderErol İskender
Erol İskender
CICansu İskender
Cansu İskender
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
TÖTurgay Ömür
Turgay Ömür
AAAtakan Aksoy
Atakan Aksoy
This study evaluated asphalt mixtures incorporating two diatomite types (D1 and D2) at contents of 10% and 15% by binder weight and three fibre treatments added by aggregate weight: polyacrylonitrile (PAN) (0.065%), polyethylene terephthalate (PET) (0.10%), and basalt fibre (0.30%). An unmodified mixture and a mixture containing 5% styrene–butadiene–styrene (SBS) by binder weight were included as references. Performance was assessed using indirect tensile strength (ITS), tensile strength ratio (TSR), Cantabro loss, repeated load creep, and semi-circular bending (SCB) tests. Factorial analysis of variance indicated that diatomite type and content significantly affected ITS, diatomite content governed permanent deformation, and diatomite type was the principal factor affecting Cantabro loss. Significant interaction effects for the SCB parameters showed that fracture performance depended on the specific combination of diatomite and fibre treatments. Among the tested formulations, D1%10-PAN exhibited the highest ITS of 4712.36 kPa, representing numerical increases of 43.8% and 22.4% over the control and SBS-modified mixtures, respectively. D1%10-PET achieved the highest TSR (95.58%), whereas D2%10-PAN exhibited the lowest Cantabro loss (6.76%). Mixtures containing 15% diatomite generally showed lower permanent deformation, while D2%10-PAN achieved the highest flexibility index (14.003). The different performance trends observed for D1 and D2 are likely associated with differences in their physical characteristics, such as particle morphology and binder absorption behaviour, which may influence their interaction with the asphalt mastic and fibre reinforcement. No single formulation provided the best performance for every response. Overall, D2-based treatments improved resistance to particle loss, a higher diatomite content enhanced permanent deformation resistance, and 10% diatomite combined with PAN or PET treatment provided a more favourable balance of tensile, moisture, and fracture performance.