Osman Ünsal BAYRAK

Osman Ünsal BAYRAK

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2020 in Proceedings of the Institution of Civil Engineers - Transport
Verified
Journal Article
Closed access
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
HBHalim Ferit Bayata
Halim Ferit Bayata
The choice of intersection type in a road network is one of the most important decisions to be made in transportation engineering. Capacity and level of service are the two main factors considered in the type of intersection design, but safety and economy should also be taken into account when determining the intersection type since these are equally important. A number of parameters can be used to evaluate the performance of an intersection, including travel time, average delay, queue length, fuel consumption and vehicle exhaust emissions. Adding safety and construction costs to these parameters makes decision-making more difficult. In this study, the analytic hierarchy process (AHP) was used as a multi-criteria decision approach to overcome this problem. Three intersection types were modelled and tested using Vissim software in line with the above parameters. An AHP model was then generated using the Vissim results and the AHP results and applicability were analysed.

4 May 2016 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
SHSinan Hınıslıoğlu
Sinan Hınıslıoğlu
The purpose of a rigid pavement design is to determine the thickness of the layers and the quality of the materials used in the pavement. The stresses occurring in a pavement should not exceed the modulus of rupture of the concrete. In this study, the answer to the most reliable and cost-effective solution for a pavement design for a single axle and different temperature gradients was investigated. 3D finite element analysis (FEA) using the ABAQUS package program was carried out with the Taguchi method. A factor, cost to stress difference ratio (Cost/(σcr−σmax)), was developed to find both the most reliable and the cost-effective solution. The maximum principal stress was calculated by FEA for each of the alternative pavement design. Among the many alternative pavement designs, the solution that gives the minimum cost to stress difference ratio is selected as both the most reliable and cost-effective design.

24 November 2022 in Coatings
Verified
Journal Article
Open access
PDF file
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
HBHalim Ferit Bayata
Halim Ferit Bayata
This study aimed to determine the material properties and the thickness of the layers of an unbonded jointed plain concrete pavement design over a deteriorated flexible pavement that lost its service capability. Maximum principal stresses occurring under the concrete pavement should not exceed the modulus of rupture of the concrete. Three-dimensional finite element analyses using ANSYS (Release 18.1 SAS IP, Inc.) software were carried out with the Taguchi method. The most reliable solution for the pavement design was investigated with whole configuration axle loading that reflects the realistic traffic situation. The stress values under the concrete slab due to the positive temperature gradient neglected in the American Association of State Highway and Transportation Officials (AASHTO) method were also investigated. The concrete slabs are exposed to these stresses for longer than the axle loads. Temperature distributions throughout the thickness of the concrete slab were calculated with the bilinear formulas suggested in the study. Axle loadings were applied on both the pavement edge and corner to reflect the most critical loading condition in the pavement design. The critical axle type was found to be 1.2. It was observed that a 0.15 m concrete thickness was appropriate for the concrete class, joint spacing and hot mix asphalt (HMA) elasticity modulus levels used for the 1.22, 1.122, and 1.2 + 111 axle types, but it was not appropriate for the 1.2 axle types. The slab thicknesses calculated with the AASHTO method, and the finite element method were found to be close to each other. It was determined that the concrete thickness significantly affected the maximum principal stress, with a performance statistic (S/N) value of 1692 for the 1.2 axle type. This was followed by the modulus of elasticity of the concrete with an S/N value of 0.356, the modulus of elasticity of the existing flexible pavement with an S/N value of 0.244, and the concrete joint spacing with an S/N value of 0.105. A practical design guide was recommended to extend the service life of a highly deteriorated flexible pavement with the construction of unbonded jointed plain concrete.

2 February 2021 in Sādhanā
Verified
Journal Article
Closed access
PDF file
ADAhmet Oğuz Demiriz
Ahmet Oğuz Demiriz
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
HBHalim Ferit Bayata
Halim Ferit Bayata

28 May 2025 in Urban Science
Verified
Journal Article
Open access
PDF file
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
Urban transportation systems are increasingly strained by population growth, changing mobility patterns, and the need for sustainable infrastructure planning. The accurate modeling of urban trip generation is critical for effective and sustainable transportation planning, especially in the context of rapidly growing urban populations and evolving travel behaviors. This study investigated the application of advanced statistical methods and artificial intelligence-based techniques for forecasting urban travel demand. Erzincan, with a population of approximately 200,000, serves as a representative mid-sized city, offering valuable insights for transportation planning and traffic management. Data collected from various user groups, including households and university students, provide a comprehensive understanding of local travel behavior. Four predictive modeling techniques, linear regression, Poisson regression, negative binomial regression, and artificial neural networks (ANNs), were applied to the dataset, followed by a comparative performance evaluation. Additionally, a macro-level simulation was conducted using VISUM (Release 18.2.22) software to evaluate the current transportation network and assess the potential impacts of proposed improvement scenarios. The results show that the ANN model provided the highest predictive accuracy for household-based data (R2 = 0.62), while the linear regression model yielded the best results for dormitory-based data (R2 = 0.95). Furthermore, Poisson regression proved most effective in estimating the minimum trip generation time, which was estimated to be 22.77 min under simulated conditions. The study offers practical insights for transport planners and policymakers by demonstrating how predictive analytics and simulation tools can be integrated to address urban mobility challenges.

30 December 2018 in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Closed access
PDF file
HBHalim Ferit Bayata
Halim Ferit Bayata
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
Erzurum’da trafiğe kayıtlı araç sayısı 2017 yılı (TUİK) verilerine göre, 114.044’tür. Erzurum, Doğu Anadolu Bölgesinin en büyük şehirlerinden biridir. Aynı zamanda, bölgenin cazibe merkezlerinden biri olduğu için, araç sayısındaki mevsimsel artış% 17.61'dir. Bu sayı her yıl ortalama %2,8 artmasına rağmen, mevcut yolların kapasiteleri sabit kalmaktadır. Bu sonuç, yolların yetersiz kalmasına neden olmakta, trafik yoğunluğunun artmasıyla birlikte, seyahat süresi, gecikme ve egzoz emisyonlarının artmasını da beraberinde getirmektedir. Buna ek olarak, yapılan araştırmalar, Türkiye’de şehir merkezlerinde meydana gelen trafik kazalarının yaklaşık %52’sinin kavşaklarda meydana geldiğini göstermektedir. Bu çalışmada, Karayolları 12. Bölge Müdürlüğü tarafından yapılması planlanan bir kavşağın çevre ve bölge trafiğine etkisi araştırılmıştır. Yapılması düşünülen kavşak, Erzurum-Bingöl devlet yolu üzerinde ve Atatürk Üniversitesi Kampüsünü bu yola bağlayan nokta üzerindedir. Mevcut ve yeni durum, VISSIM mikro-simülasyon programı ile modellenmiş ve seyahat süresi, gecikme, kuyruk uzunlukları ile CO, NOx, VOC ve yakıt tüketimleri karşılaştırılmıştır. Mikro-simülasyon analiz sonuçlarına göre, seyahat süresi ve gecikmelerde %35, kuyruk uzunluklarında %83, egzoz emisyonlarında ise yaklaşık %23’e varan oranlarda azalma gözlenmiştir.