Nicolas Martinez

Dr. Nicolas Martinez

Ingeniería de Materiales, Universidad del Valle, Cali, Valle del Cauca, Colombia
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2024 in Polymers
Verified
Journal Article
Open access
PDF file
COCamilo Oliveros-Gaviria
Camilo Oliveros-Gaviria
ECEdwin Cumbalaza
Edwin Cumbalaza
Jose H. Mina-HernandezJose H. Mina-Hernandez
Jose H. Mina-Hernandez
MVMayra Eliana Valencia-Zapata
Mayra Eliana Valencia-Zapata
JSJuan Nicolas Suarez-Bonilla
Juan Nicolas Suarez-Bonilla
Nicolas MartinezNicolas Martinez
Nicolas Martinez
The current work presents the reformulation of a composite based on high-density polyethylene obtained through the recycling of blow-molded containers (rHDPE) with natural fiber residues (wood sawdust). This material is technically and industrially known as WPC (wood plastic composite). The original formulation of this material contains 34% high-density polyethylene and 60% sawdust by weight fraction, while the remaining components include additives and coupling agents such as wax (Coupling Agent TPW 813 for plastic woods), stearic acid, and color pigment. The composite material was processed using the profile extrusion method, from which samples were obtained to conduct various experimental tests. The mechanical analysis revealed that both the strength and Young’s modulus of the tensile and flexural properties slightly increased with the addition of sawdust to the composite. Additionally, the stiffness was higher compared to high-density polyethylene, indicating a direct relationship between these properties and the amount of sawdust incorporated. Besides this, other characterization methods were performed on the material, including density, hardness, and compression tests, as well as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), natural and accelerated aging tests, Vicat softening temperature, and heat deflection temperature analysis (HDT). The initial evaluation provides a guide to enhance the most important properties with the aim of using the extruded profiles as pergolas in the real estate sector. Therefore, new formulations are developed with the assistance of Minitab 21 software, maintaining a constant proportion of materials that do not affect the mechanical properties, such as wax, stearic acid, and color pigment. Once the formulations are made, each one is characterized through tensile tests to determine which has the best performance. The formulation with the highest strength is re-characterized using the techniques mentioned in the starting material to obtain a material with the most optimal characteristics.

8 December 2025 in Polysaccharides
Verified
Journal Article
Open access
PDF file
ATAndrea Carolina Acosta Tirado
Andrea Carolina Acosta Tirado
JMJairo G. Salcedo Mendoza
Jairo G. Salcedo Mendoza
Nicolas MartinezNicolas Martinez
Nicolas Martinez
HRHoward Ramirez-Malule
Howard Ramirez-Malule
Jose H. Mina-HernandezJose H. Mina-Hernandez
Jose H. Mina-Hernandez
The mechanical, thermal, physicochemical and structural properties of a thermoplastic cassava starch obtained by a twin-screw extrusion process were evaluated, using glycerol and isosorbide as plasticizers at different concentrations (30, 35 and 40% by weight) and storage times (1, 15 and 30 days) under controlled conditions of relative humidity of 47 ± 2% and temperature of 25 ± 2 °C. The results obtained show a decrease in tensile strength and modulus of elasticity and an increase in elongation in the initial measurements, suggesting that, in both cases, a plasticization phenomenon via absorption of humidity predominated in short times, while at prolonged times, a rigidification of the material occurred due to the generation of a retrogradation process. Likewise, a higher tensile strength and lower elongation were found in the materials plasticized with isosorbide. Finally, it was observed that the retrogradation phenomenon was more evident in the thermoplastic starch samples made with glycerol, and that the starches plasticized with isosorbide had lower moisture absorption, higher crystallinity and a predominantly Eh-type crystalline pattern, related to greater stability over time.

15 June 2026 in Sci
Verified
Journal Article
Open access
PDF file
LTLeidy Johana Tobar-Miranda
Leidy Johana Tobar-Miranda
ATAngela María Tobar-Miranda
Angela María Tobar-Miranda
Nicolas MartinezNicolas Martinez
Nicolas Martinez
Mario Fernando Muñoz-VélezMario Fernando Muñoz-Vélez
Mario Fernando Muñoz-Vélez
HRHoward Ramirez-Malule
Howard Ramirez-Malule
Jose H. Mina-HernandezJose H. Mina-Hernandez
Jose H. Mina-Hernandez
A controlled composting biodegradation system was implemented to evaluate a wood–plastic composite (WPC) composed of wood fibers and recycled HDPE (rHDPE), in accordance with ASTM D5338, by measuring CO2 capture over 45 days. This evaluation was complemented with mechanical and physicochemical characterization, including stereomicroscopy/SEM, mass loss, water absorption, contact angle, tensile strength, FTIR, TGA, and DSC. The results showed 6.12% biodegradation, classifying the material as neither biodegradable nor compostable. SEM analysis revealed increased surface roughness, cracks, and microbial-like structures, together with a 10% decrease in contact angle. The mechanical properties declined by 33% (tensile strength), despite only 1.26% mass loss, which was attributed to weakening of the matrix–fiber interfacial adhesion due to water absorption. TGA, DSC, and FTIR supported the interpretation that degradation occurred preferentially in the wood fibers.

10 October 2026 in Resources
Verified
Journal Article
Open access
PDF file
JPJuan Pablo Pacheco
Juan Pablo Pacheco
BQBrayan Alexis Quiñones-Mosquera
Brayan Alexis Quiñones-Mosquera
Nicolas MartinezNicolas Martinez
Nicolas Martinez
FAFred Albán-Achinte
Fred Albán-Achinte
Mario Fernando Muñoz-VélezMario Fernando Muñoz-Vélez
Mario Fernando Muñoz-Vélez
Jose H. Mina-HernandezJose H. Mina-Hernandez
Jose H. Mina-Hernandez
The search for renewable raw materials for developing wood adhesives has driven the study of natural resins with intrinsic adhesive properties. This work evaluated Mopa Mopa resin (Elaeagia pastoensis Mora) as an adhesion promoter in formulations for wood-to-wood bonding of pine. Initially, the individual behavior of the main components was assessed, and subsequently, nine systems were formulated by combining Mopa Mopa resin with polyvinyl acetate (PVAc), polyvinyl alcohol (PVA-OH), and starch. The selected formulations were compared with two commercial adhesives using shear and direct tensile strength tests, physical properties, FTIR, TGA, DSC, and fracture surface analysis. Mopa Mopa resin, evaluated individually, achieved a shear strength of 6.657 MPa, second only to that obtained with PVAc among the components studied. Following the initial screening stage, formulations F-3 and F-5 were selected and subsequently prepared as final adhesive systems containing 5.8% additives. Final formulation F-3 consisted of 54.2% PVAc, 20% Mopa Mopa resin, 20% PVA-OH, and 5.8% additives, whereas F-5 consisted of 29.5% PVAc, 37.5% Mopa Mopa resin, 27.2% cassava starch, and 5.8% additives. F-3 achieved a shear strength of 7.792 MPa, surpassing the commercial adhesive C1 (6.328 MPa), while F-5 achieved the highest average direct tensile strength (1.371 MPa). Physicochemical characterization confirmed the presence of functional groups associated with the formulation components, while fracture analysis of F-3 revealed cohesive, mixed, and substrate failures. Taken together, the results demonstrate the potential of Mopa Mopa resin as a functional component and adhesion promoter in wood formulations, allowing its combination with synthetic polymers and renewable raw materials to obtain bonds with competitive mechanical performance.
1