This work assesses the impact of the presence of Nano scaled silicon carbide on the Mechanical & Tribological behavior of aluminium matrix composites. Aluminium matrix composites containing 0, 0.5, 1, 1.5, 2 and 2.5 wt.%-nano scaled silicon carbide was set up by a mechanical stirrer. The trial comes about to demonstrate that the inclusion of Nano silicon carbide brings about materials with progressively high elastic modulus and likewise brings about expanded brittle behavior, fundamentally lessening failure strain. Shear modulus and flexural shear modulus likewise increases with silicon carbide increase. The presence of Nano scaled silicon carbide in the aluminium matrix diminishes subsurface fatigue wear and increases wear resistance, because of silicon carbide lubricant activity. Wear testing, microstructure & morphological, density & void testing, hardness, flexural and tensile test of the readied composites were investigated and outcomes were analyzed which demonstrated that including nano-SiC in aluminum (Al) matrix increased wear resistance, tensile strength, and 2 wt. % of nano scaled SiC for Al MMC indicated maximum wear resistance, tensile strength, and an optimum balanced mix of both Tribological and Mechanical properties. Microstructural observation uncovered uniformand homogeneous distribution of SiC particles in the Al matrix.

Electrical discharge machining (EDM) is a non-conventional machining process that is used for machining of hard-to-machine materials, components in which length to diameter ratio is very high or products with a very complicated shape. The process is commonly used in automobile, chemical, aerospace, biomedical, and tool and die industries. It is very important to select optimum values of input process parameters to maximize the machining performance. In this paper, an attempt has been made to carry out multi-objective optimization of the material removal rate (MRR) and roughness parameter (Ra) for the EDM process of EN31 on a CNC EDM machine using copper electrode through evolutionary optimization techniques like particle swarm optimization (PSO) technique and biogeography based optimization (BBO) technique. The input parameter considered for the optimization are Pulse Current (A), Pulse on time (µs), Pulse off time (µs), and Gap Voltage (V). PSO and BBO techniques were used to obtain maximum MRR and minimize the Ra. It was found that MRR and SR increased linearly when discharge current was in mid-range however non-linear increment of MRR and Ra was found when current was too small or too large. Scanning Electron Microscope (SEM) images also indicated a decreased Ra. In addition, obtained optimized values were validated for testing the significance of the PSO and BBO technique and a very small error value of MRR and Ra was found. BBO outperformed PSO in every aspect like computational time, less percentage error, and better optimized values.

Spreading infectious illnesses such as viral meningitis, hepatitis, and cytomegalovirus among people is facilitated by spitting in public. India is more prone to transferring infectious illnesses. Recent research discovered that the new Coronavirus may also be transmitted via an infected person’s saliva. Self-collected saliva from 91.7% of patients contains COVID-19. Numerous nations have prioritized preventing individuals from spitting in open or public areas such as hospitals, parks, airports, train stations, etc. The UVC range has a greater damaging effect on microbial cells because microorganisms’ intracellular components, such as RNA, DNA, and proteins, are sensitive to UVC photon absorption. In this article, the design and construction of a solar-concentrating spittoon is attempted. At its receiver, it can create a temperature of 390 K and 176 W of heat. At this temperature, most viruses (including Coronavirus), bacteria, and pathogens are inactivated. Daily, from 8:00 a.m. until 5:00 p.m., the solar-concentrating spittoon is functional. The solar-concentrating spittoon performance was best for nine hours. The receiver thermal efficiency was 80% and 20% of heat was lost to the surroundings. The overall efficiency was found to be 70%. During this time, most people spend their time outside, where this solar-powered spittoon can incinerate human cough and spit within one minute. The installation of this solar-concentrated spittoon will aid in preventing the spread of fatal dangerous diseases and cleaning the city.

The tremendous growth of manufacturing industries and desired need of accuracy and precision has put a great importance on non-traditional machining processes. Metal and non-metals having properties like high strength, toughness, and hardness is generally machined by non-conventional machining methods. One of earliest non-traditional machining that is still in use and being effectively utilized in industries is wire electrical discharge machine. This machining technique gives a tough line of competition to conventional machining process like milling, grinding, broaching, etc. Cutting intricate and delicate shapes with accuracy and precision gives this machining technique an edge over other conventional machining and non-conventional machining processes. This chapter provides an insight to various research and prominent work done in field of WEDM by various scientists, researchers, and academicians. The chapter also emphasizes various advantages and disadvantages of different modelling and optimization methods used. The chapter concludes with some recommendations about trends for future WEDM researchers.