The topic of battery state-of-health monitoring via electrical and non-electrical testing procedures has become of increased interest for scientific researchers, due to the imposed goal of expanded industrial sustainability. Within the present study, we propose a novel approach for monitoring the temperature of batteries by means of infrared thermography. In order to improve the accuracy of the performed measurements and to overcome the limitations imposed by the cylindrical housing of the batteries, we have developed a unique method for monitoring and capturing the temperature of the battery over the entire housing. An experimental system was built, through which the battery performs a rotational movement relative to its axis, with this rotation motion being synchronized with the frame rate of the thermal camera. The resulting thermographic images are processed using specifically developed software. This software enables the segmentation of certain sections of the battery’s surface from a defined spatial perspective. These selected segments are subsequently utilized to generate a three-dimensional representation of the battery’s surface temperature’s distribution. In this way, errors in the obtained results which are caused by the viewing angle are avoided. Additionally, we developed and presented a method for the increasing of the resolution of captured thermograms.
The thermal conductivity of PCB structures variations according to the position of the metal layers as a function of the local copper contents and distribution are studied. The value of the parallel and serial thermal conductivity coefficient of PCB have been calculated by usage of the corresponding electrical analogs of parallel and serial resistive systems. Solutions were obtained for two PCB thicknesses. Cases with and without a copper layer on the component side were investigated. Simulated results are verified with infrared thermovision measurements.
The paper focuses on and examines the issues and problems related to remote evaluation of software engineering competences using progressive competence representation model. Authors suggested original approach for Master Program in Software Engineering competence evaluation as a combination academic competences and professional competences from European Competence model (e-CF). Examples of competence description for 16 subjects from proposed a Joint Master Program in Software Engineering are developed. Several types of scoring rubrics for Software Engineering competences evaluation are reviewed and rubrics templates created. The developed models and templates can be used by universities and IT enterprises for training results evaluation as well as for competence evaluation for Software Engineering Master program's graduates.
The ongoing integration of telecommunications with the learning and collaboration process has enabled many of the engineering projects to take advantage of the remote access to laboratories that it allows. However, most of the remote laboratories today are simulated or else real, but with a fixed configuration. With the integration of telecommunication technologies and computer science with virtual instrumentation, real, remote laboratories can be developed and accessed through Internet in real time, ensuring a richer collaborative experience for the student while avoiding some of the growing limitations of traditional laboratories, such as the lack of enough work area, expensive instrumentation, lack of personnel, time assigned to a laboratory, and their availability in non-working office hours. In this paper, we present a method of creating a web-based Remote Laboratory Experimentation in the MSc course “Wireless Communications Systems” which is part of “Information and Communication Systems (ICS)” curriculum. This is done within the RIPLECS project (http://riplecs.dipseil.net/). The course “Wireless Communication Systems” gives students an overview of the characteristics of different types of antennas used in wireless communications and the wave propagation in mobile communications. The practical part consists of several assignments dealing with understanding the basic functions of the antennas as well as mobile communication propagation characteristics experiments. The proposed approach integrates a traditional Learning Management System (LMS) with the remote access to real instrumentation located in wireless communication laboratory, without requiring specific software components on the client side. The remote laboratory system relying on virtual instruments (VIs) is described in RIPLECS. This paper presents our performance support approach to the design of the wireless communications course in DIPSEIL system (env.dipseil.net/v3). There are listed the tasks and their educational objectives.
The thermal influence of the topology of the COB (Chip-on-Board) LED modules is examined. For this purpose CFD simulations of a powerful COB LED module thermal model are carried out and the thermal distribution at different locations of LED chips is analyzed. Simulation experiments are designed, using the substrates of ceramic materials - Alumina (Typical), Alumina (94 %), Alumina (96 %) and AlN. The thermal efficiency of four different structures of COB LED modules with different modes of operation and environment is examined. The simulation results are verified with thermal measurements.
This paper presents a case study of research-based learning (RBL) implemented in an undergraduate engineering course through a module titled “State-of-Charge Monitoring of Li-Ion Batteries Using Thermographic Surface-Temperature Measurements”. The experiment involved 10 third-year engineering students and employed a single-group pre- and post-test design and a lecturer interview. The module provided students with an authentic research experience using advanced laboratory equipment. The study examines students’ attitudes, satisfaction, and development of research skills, as well as the lecturer’s perspective on the advantages and challenges of RBL. While the study had a limited timeframe and specific design characteristics, the findings could benefit researchers interested in integrating RBL. Results indicated that students showed initial interest, primarily seeking practical knowledge and skills. By the end of the experiment, they reported that RBL fostered high motivation and strengthened their sense of commitment, responsibility, and initiative. Despite the students’ enthusiasm and the lecturer’s motivation, the results show that preparing and implementing RBL required significant time and effort on the lecturer’s part. The students’ lack of prior knowledge in research activities and the limited time frame posed considerable challenges. Recommendations include implementing RBL over a longer period and involving additional educators to enhance student support.