The topic of battery state-of-health monitoring via electrical and non-electrical testing procedures has become of increased interest for scientific researchers, due to the imposed goal of expanded industrial sustainability. Within the present study, we propose a novel approach for monitoring the temperature of batteries by means of infrared thermography. In order to improve the accuracy of the performed measurements and to overcome the limitations imposed by the cylindrical housing of the batteries, we have developed a unique method for monitoring and capturing the temperature of the battery over the entire housing. An experimental system was built, through which the battery performs a rotational movement relative to its axis, with this rotation motion being synchronized with the frame rate of the thermal camera. The resulting thermographic images are processed using specifically developed software. This software enables the segmentation of certain sections of the battery’s surface from a defined spatial perspective. These selected segments are subsequently utilized to generate a three-dimensional representation of the battery’s surface temperature’s distribution. In this way, errors in the obtained results which are caused by the viewing angle are avoided. Additionally, we developed and presented a method for the increasing of the resolution of captured thermograms.
The possibilities and specifics of the application of the thermographic non-destructive diagnostics in the development and production of PCBs are analyzed. Methods for evaluation of the temperature regimes of the electronic elements and their impact on the reliability of the PCB are noted. The problems in determining the reliability of the PCB elements according to thermographic diagnostics data are presented. A methodology for reliability evaluation of both individual components and PCBs in the operating temperature range is proposed. Thermographic measurements of test and real operating PCBs were performed. An approach is presented to automate the process of thermal control using infrared.
In this paper, the thermal behaviour of lithium-ion (LI) batteries at different charging and discharging modes is studied. With the help of infrared thermography is carried out continuous monitoring of the surface temperature distribution under different environmental conditions of batteries with different residual life. A circuit for providing a constant discharge current has been designed and used for the purposes of the study. An approach for optimizing the charging and discharging modes based on thermal measurements is proposed. This fast approach can be an alternative to the experimental study of thermal effects and it is possible to be built in battery heat management systems.
In this work, variation of the main electrical parameters of flexible organic light-emitting diodes (FOLEDs) is studied as a function of the thermal conditions. Tested structures are consisted of polyethylene terephthalate (PET) as a flexible substrate, indium-tin oxide transparent conductive anodes, polyphenylene vinylene derivative based emissive films and aluminum cathodes. Thermal degradation analysis of the FOLEDs characteristics is performed by IR thermography in broad range of voltages and driving current densities at different temperatures. The study of thermal distribution with the time provides important information for the thermal events in the operating FOLED, as well as for the local temperature change, due to the presence of hidden defects. CFD thermal simulations of two types of test FOLED samples were conducted. Experimental measurements of the distribution of surface temperature of the samples were carried out with an infrared camera. The obtained difference between the simulated and measured values is not greater than 5 °C at the beginning of degradation processes.
With increasing of the complexity and size of today's embedded systems, verification of the hardware and embedded software has become the critical challenge in the development process. Safety related systems, such as automotive, railways and medical, require even more detailed and documented process for quality assessment, and thus massive tests spanning billions of cycles. Meeting this challenge requires multilateral, advanced verification technologies delivering the highest performance possible to accelerate the verification process. A step towards system test automation and acceleration is real time hardware emulation. There are numerous approaches, related to it, generally called hardware in the loop (HIL). Some of them aim to emulate the target microcontrollers, others - the attached peripherals. In this paper we present multi-microcontroller system that emulates different peripheral types. Using an example use-case from the automotive industry (automotive seat heater) are discussed the possible emulation speeds, synchronization, and the difference between the emulation and the real system setup.