Steady-state visual evoked potential (SSVEP)-based brain-computer interface (BCI) systems suffer from low SSVEP response intensity and visual fatigue, resulting in lower accuracy when operating the system for continuous commands, such as an electric wheelchair control. This study proposes two SSVEP improvements to create a practical BCI for communication and control in disabled people. The first is flicker pattern modification for increasing SSVEP response through mixing (1) fundamental and first harmonic frequencies, and (2) two fundamental frequencies for an additional number of commands. The second method utilizes a quick response (QR) code for visual stimulus patterns to increase the SSVEP response and reduce visual fatigue. Eight different stimulus patterns from three flickering frequencies (7, 13, and 17 Hz) were presented to twelve participants for the test and score levels of visual fatigue. Two popular SSVEP methods, i.e., power spectral density (PSD) with Welch periodogram and canonical correlation analysis (CCA) with overlapping sliding window, are used to detect SSVEP intensity and response, compared to the checkerboard pattern. The results suggest that the QR code patterns can yield higher accuracy than checkerboard patterns for both PSD and CCA methods. Moreover, a QR code pattern with low frequency can reduce visual fatigue; however, visual fatigue can be easily affected by high flickering frequency. The findings can be used in the future to implement a real-time, SSVEP-based BCI for verifying user and system performance in actual environments.

Brain–computer interfaces (BCIs) are widely utilized in control applications for people with severe physical disabilities. Several researchers have aimed to develop practical brain-controlled wheelchairs. An existing electroencephalogram (EEG)-based BCI based on steady-state visually evoked potential (SSVEP) was developed for device control. This study utilized a quick-response (QR) code visual stimulus pattern for a robust existing system. Four commands were generated using the proposed visual stimulation pattern with four flickering frequencies. Moreover, we employed a relative power spectrum density (PSD) method for the SSVEP feature extraction and compared it with an absolute PSD method. We designed experiments to verify the efficiency of the proposed system. The results revealed that the proposed SSVEP method and algorithm yielded an average classification accuracy of approximately 92% in real-time processing. For the wheelchair simulated via independent-based control, the proposed BCI control required approximately five-fold more time than the keyboard control for real-time control. The proposed SSVEP method using a QR code pattern can be used for BCI-based wheelchair control. However, it suffers from visual fatigue owing to long-time continuous control. We will verify and enhance the proposed system for wheelchair control in people with severe physical disabilities.

This paper presents an illusory visual motion stimulus-based brain-computer interface (BCI). We aim to use the proposed system to enhance the motor imagery (MI) modality. Since motor imagery requires a long time for training, a stimulation method with external stimuli through the sensory system is an alternative method for increasing efficiency. The research is divided into two parts. First, we observed the visual motion illusion pattern based on brain topographic maps for the novel BCI modality. Second, we implemented the illusory visual motion stimulus-based BCI system. Arrow and moving-arrow patterns were used to modulate alpha rhythms at the visual and motor cortex. The arrow pattern had an average classification accuracy of approximately 78.5%. Additionally, illusory visual motion stimulus-based BCI systems are proposed using the proposed feature extraction and decision-making algorithm. This proposed BCI system can control the cursor moving in the left or right direction with the designed algorithm to create five commands for assistive communication. Ten volunteers participated in the experiment, and a brain-computer interface system with motor imagery and an illusory visual motion stimulus were used to compare efficiencies. The results showed that the proposed method achieved approximately 4% higher accuracy than motor imagery. The accuracy of the proposed illusory visual motion stimulus and algorithm was approximately 80.3%. Therefore, an illusory visual motion stimulus hybrid BCI system can be incorporated into the MI-based BCI system for beginner motor imagery. Based on the results, the proposed assistive communication system can be used to enhance communication in people with severe disabilities.

In this study, we conducted two steady-state visual evoked potential (SSVEP) studies to develop a practical brain–computer interface (BCI) system for communication and control applications. The first study introduces a novel visual stimulus paradigm that combines checkerboard patterns with flickering circles configured in single-, double-, and triple-layer forms. We tested three flickering frequency conditions: a single fundamental frequency, a combination of the fundamental frequency and its harmonics, and a combination of two fundamental frequencies. The second study utilizes personalized visual stimuli to enhance SSVEP responses. SSVEP detection was performed using power spectral density (PSD) analysis by employing Welch’s method and relative PSD to extract SSVEP features. Commands classification was carried out using a proposed decision rule–based algorithm. The results were compared with those of a conventional checkerboard pattern with flickering squares. The experimental findings indicate that single-layer flickering circle patterns exhibit comparable or improved performance when compared with the conventional stimuli, particularly when customized for individual users. Conversely, the multilayer patterns tended to increase visual fatigue. Furthermore, individualized stimuli achieved a classification accuracy of 90.2% in real-time SSVEP-based BCI systems for six-command generation tasks. The personalized visual stimuli can enhance user experience and system performance, thereby supporting the development of a practical SSVEP-based BCI system.

Human–machine interface (HMI) systems are increasingly utilized to develop assistive technologies for individuals with disabilities and older adults. This study proposes two HMI systems using piezoelectric sensors to detect facial muscle activations from eye and tongue movements, and accelerometers to monitor head movements. This system enables hands-free wheelchair control for those with physical disabilities and speech impairments. A prototype wearable sensing device was also designed and implemented. Four commands can be generated using each sensor to steer the wheelchair. We conducted tests in offline and real-time scenarios to assess efficiency and usability among older volunteers. The head–machine interface achieved greater efficiency than the face–machine interface. The simulated wheelchair control tests showed that the head–machine interface typically required twice the time of joystick control, whereas the face–machine interface took approximately four times longer. Participants noted that the head-mounted wearable device was flexible and comfortable. Both modalities can be used for wheelchair control, especially the head–machine interface for patients retaining head movement. In severe cases, the face–machine interface can be used. Moreover, hybrid control can be employed to satisfy specific requirements. Compared to current commercial devices, the proposed HMIs provide lower costs, easier fabrication, and greater adaptability for real-world applications. We will further verify and improve the proposed devices for controlling a powered wheelchair, ensuring practical usability for people with paralysis and speech impairments.

Research on self-imagined emotional imagery supports the development of practical affective brain–computer interface (BCI) systems. This study proposes a hybrid emotion induction approach that combines facial expression image cues with subsequent emotional imagery, involving six positive and six negative emotions across two- or four-class valence and arousal categories. Machine learning (ML) techniques were applied to interpret these self-generated emotions from electroencephalogram (EEG) signals. Experiments were conducted to observe brain activity and validate the proposed feature and classification algorithms. The results showed that absolute beta power features computed from power spectral density (PSD) across EEG channels consistently achieved the highest classification accuracy for all emotion categories with the K-nearest neighbors (KNN) algorithm, while alpha–beta ratio features also contributed. The nonlinear parametric ML models achieved high effectiveness; the K-nearest neighbor (KNN) classifier performed best in detecting neutral states, while the artificial neural network (ANN) achieved balanced accuracy across emotional stages. The proposed system supports the use of the hybrid emotion induction paradigm and PSD-derived EEG features to develop reliable, subject-independent affective BCI systems. In future work, we will expand the datasets, employ advanced feature extraction and deep learning models, integrate multi-modal signals, and validate the proposed approaches across broader populations.