This article investigates the modification of a carbon steel surface by benzotriazole (BTA), and the structure and properties of the formed layers. Adsorption was studied by surface analytical methods such as X-ray photoelectron spectroscopy (XPS) and reflecting infrared microscopy (FTIR). It has been established that a polymer-like film containing iron-azole complexes that are 2 nm thick and strongly bonded to the metal is formed on the surface as a result of the azole interacting with a steel surface. This film is capable to inhibit uniform and localized corrosion of steel in neutral aqueous electrolytes containing chloride ions. It is shown that the iron-azole layer located at the interface acts as a promotor of adhesion, increasing the interaction of polymeric coatings with the steel surface. Taking into account these properties, the steel pretreatments can be used for improving the anticorrosion properties of polymeric coatings applied for the protection of steel constructions.
The presented paper analyzes polymer films formed from aqueous solutions of organosilanes, corrosion inhibitors and their compositions. Methods of depositing inhibited films on metal samples, such as dipping and exposure of the sample in a modifying solution, as well as an alternative method, electrophoretic deposition (EPD), are discussed. Information is provided on the history of the EPD method, its essence, production process, areas of application of this technology, advantages over existing analogues, as well as its varieties. The article considers the promise of using the EPD method to form protective inhibited polymer films on metal surfaces from aqueous solutions of inhibitor formulations consisting of molecules of organosilanes and corrosion inhibitors.
Coatings based on refractory metals and compounds have been used in various industries since the last century due to their high thermal and heat resistance, as well as their excellent mechanical and tribological properties. Advances have made it possible to apply high-tech methods for their production, which has improved their availability and expanded their range of applications. A promising area of use of coatings based on refractory systems is the anticorrosion protection of structural materials. The high wear resistance and anticorrosion ability of these materials will allow for the protection of critical units of equipment of various industries from the complex destructive effects of factors of chemical and mechanical nature. For the effective choice of coating composition, it is necessary to know the basic characteristics of refractory material layers and the method of their production. The purpose of this article is to summarize modern scientific data on methods of obtaining refractory coatings, as well as on their composition, structure, and protective properties. The information presented in this review will bridge the gap between research and industrial development and expand the niche area of utilization.
Adsorption of diaminesilane (DAS), vinyltrimethoxysilane (VS) on the surface of thermally precipitated aluminium was examined. The use of different adsorption isotherms made it possible to calculate the adsorption heats for DAS and VS. It was determined that chemisorption of these organosilanes occurred on the surface of aluminium. Exposure of aluminium for 60 min to aqueous solutions of organosilanes led to the formation of organosilane films on the surface of the metal. The use of infrared spectroscopy and scanning electron microscopy in the work made it possible to assess the interactions of organosilanes with the metal surface, as well as to determine the structural features of the films and their thickness. Electrochemical and corrosion research methods made it possible to study the protective properties of organosilane films on aluminium.
1 November 2016 in Protection of Metals and Physical Chemistry of Surfaces
The method of quartz crystal microbalance is used to study adsorption of vinyl trimethoxysilane (VS) on the surface of zinc from an aqueous solution. Adsorption isotherms are obtained. Approaches corresponding to the known adsorption isotherms are used for interpretation of adsorption data: Langmuir, BET, Flory–Huggins, Langmuir multicenter, Temkin, and Langmuir–Freundlich. It is shown that silanes are adsorbed on the surface of thermally deposited zinc from aqueous solutions and displace adsorbed water from the surface by occupying more than six adsorption sites on the surface. It is found that monolayer coverage of the zinc surface is reached at a concentration of the VS solution of 1 × 10–4 M. The neighboring adsorbate molecules can interact, forming siloxane dimers and trimers bound to the metal surface by either covalent or hydrogen bonds. Adsorption heats are calculated using different adsorption models. It is shown that VS is chemosorbed on the surface of zinc. An increase in the concentration of the VS solution up to 0.1 M results in formation of polycondensed siloxane oligomers on the surface with polycondensation degree n = 8–12. Oligomer surface fragments are connected with each other by hydrogen bonds and are connected with the surface by Zn–O–Si bridge bonds. The overall thickness of such a layer is 10–12 nm or ten molecular layers.
14 March 2021 in Protection of Metals and Physical Chemistry of Surfaces
The effect of a series of organosilanes and their mixtures with corrosion inhibitors on the anticorrosion properties of polymer and paint coatings on steel, namely, on the adhesive characteristics of the coatings and corrosion behavior of the metal in the presence of coatings modified with organosilanes, corrosion inhibitors, and their mixtures, is studied. It is shown that mixtures of 1,2,3-benzotriazole (BTA) with vinyltrimethoxysilane (VTMS) or aminoethylaminopropyltrimethoxysilane—diaminosilane (DAS) inhibit the local dissolution and underfilm corrosion of carbon steel, and the potential of local depassivation shifts by 0.3–0.4 V. Here, compact polymer-like layers that are strongly bound to the metal surface are formed on the surface of steel. Corrosion and mechanical tests of the samples of pipe steels with different types of inhibiting compositions are conducted. The effect of the inhibitors on the crack growth under static loading in a model soil electrolyte (pH of 5.5) and on the crack resistance of steel under slow tension in an NS-4 model underfilm electrolyte (pH of 7.0) is evaluated. The tests are performed in media free from and containing hydrogen sulfide. It is shown that the best inhibiting properties are manifested by the mixtures of corrosion inhibitors with organosilanes. Comparative laboratory and bench tests for the adhesive strength, water resistance, and resistance to cathodic detachment of the adhesive junctions obtained upon applying the modified polymer and paint coatings onto the surface of steel are performed. It is found that introducing a mixture of organosilane and a corrosion inhibitor improves the adhesive properties of polymer and paint coatings.