Phosphogypsum (PG: CaSO₄·2H₂O) is a waste product (or by-product) from the production of phosphoric acid, the main component in the production of concentrated simple and complex fertilizers. The world production of phosphogypsum exceeds 200 million tons per year. PG discharged into water bodies (seas, rivers) or disposed of in land dumps may contain elements (including heavy metals and radionuclides) in forms and concentrations that are toxic to ecosystems and human health, which raises concerns about its impact on the environment. The concentrations of these elements vary depending on the region where the raw material is mined and the process used to produce phosphoric acid. Given the significant volumes of phosphogypsum formed, an urgent problem is not only the development of methods for its disposal, but also a special, specific control over its composition after the release of PG and during its use for removal, transportation, and storage in dumps and sludge storages. This article presents the results of comprehensive studies on the determination of the chemical and mineralogical composition of by-products from an experimental plant for the processing of phosphate raw materials of the designed chemical complex of the EuroChem-Karatau company (Republic of Kazakhstan). Based on the conducted studies, it was established that, in terms of the total toxicity index, the studied wastes belong to the fourth hazard class (low-hazardous) with the possibility of processing for the purpose of their further use.

The article presents a long-term assessment of the surface water quality of six small rivers in the East Kazakhstan region (Breksa, Tikhaya, Ulba, Glubochanka, Krasnoyarka, and Oba) based on hydrochemical monitoring data from the Kazhydromet State Enterprise for the period 2017–2024. A unified water quality classification system was applied, along with statistical methods, including multiple linear regression. The Glubochanka and Krasnoyarka rivers were identified as the most polluted (reaching classes 4–5), with multiple exceedances of Zn (up to 2.96 mg/dm³), Cd (up to 0.8 mg/dm³), and Cu (up to 0.051 mg/dm³). The most stable and highest water quality was recorded in the Oba River, where from 2021 to 2024, water consistently corresponded to Class 2. Regression models of water quality class as a function of time and annual precipitation were constructed to assess the influence of climatic factors. Statistical analysis revealed no consistent linear correlation between average annual precipitation and water quality (correlation coefficients ranging from −0.49 to +0.37), indicating a complex interplay between climatic and anthropogenic factors. Significant relationships were found for the Breksa (R² = 0.903), Glubochanka (R² = 0.602), and Tikhaya (R² = 0.555) rivers, suggesting an influence of temporal and climatic factors on water quality. In contrast, the Oba (R² = 0.130), Ulba (R² = 0.100), and Krasnoyarka (R² = 0.018) rivers exhibited low coefficients, indicating the predominance of other, likely local, sources of pollution. It was found that summer periods are characterized by the highest pollution due to low water flow, while episodes of acid runoff occur in spring. A decrease in pH below 7.0 was first recorded in 2023–2024 in the Ulba and Tikhaya rivers. Forecasts to 2030 suggest relative stability in water quality under current climatic conditions; however, by 2050, the risk of water quality deterioration is expected to rise due to increased precipitation and extreme weather events. This study presents, for the first time, a systematic long-term analysis of small rivers in the East Kazakhstan region, offering deeper insight into the dynamics of surface water quality and providing a scientific foundation for developing adaptive strategies for the protection and sustainable use of water resources under climate change and anthropogenic pressure. The results emphasize the importance of prioritizing rivers with high variability in water quality for regular monitoring and the development of adaptive conservation measures. The research holds strong applied significance for shaping a sustainable water use strategy in the region.

The composition and technology for the production of semi-dry ceramic bricks using a nanostructured complex sorbent based on bentonite clay of the 11th horizon of the Tagan deposit of the Republic of Kazakhstan and basalt fiber (gabbro-diabase) of the Karauzek deposit of East Kazakhstan have been developed. The characteristics, chemical composition, and structure of the spent sorbent are given based on electron microscopic and X-ray phase analyses. A number of physical and mechanical parameters have been studied to evaluate the spent sorbent as a raw material for the production of ceramic products. The microstructures of fired ceramic samples with loam and spent sorbent have been studied, and the features of their structure have been revealed. The environmental safety of waste sorbents utilization by extraction in acidic, alkaline, and neutral media with the determination of the content of chromium, zinc, and iron ions has been studied. Experimentally obtained data indicate an insignificant concentration of chromium and zinc ions, not exceeding 3.5 µg/L. Relatively high concentrations of iron ions in ceramic bricks are associated with their high content in the feedstock and in the spent sorbent. It has been established that the introduction of the spent sorbent in the amount of 25% of the total mass increases the strength of the final product from 10.8 to 15.8 MPa, which corresponds to the M125 ceramic brick grade.