Raigul Ramazanova

Mrs. Raigul Ramazanova

International School of Engineering, D. Serikbayev East Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2024 in Heliyon
Verified
Journal Article
Open access
ABAltynsary Bakirov
Altynsary Bakirov
AZAblay Zhunusov
Ablay Zhunusov
NONatalya Oleinikova
Natalya Oleinikova
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
The goal of this research is to select the optimal composition of the sintering charge of ash and slag waste for maximum extraction of alumina and obtaining self-disintegrating sinters of a given chemical composition. Experiments have shown that sintering of ash and slag waste using two-component charges makes it possible to extract alumina from sinters by no more than 60 %. The highest sintering rates were made using three-component charges. So, when sintering ash and slag waste from Almaty TPP-2 on a three-component charge of the composition CaO:SiO2 = 2; Na2O:(Al2O3+Fe2O3) = 1 at a duration of 60 min and a temperature of 1200 °C, alumina extraction was 83.68 %, under the same conditions, alumina extraction of 87.07 % was obtained during sintering of ash and slag waste from the Eurasian Energy Corporation, and alumina extraction was 90.2 % during sintering of ash and slag waste obtained after preliminary chemical activation.

1 September 2016 in Metallurgist
Verified
Journal Article
Closed access
PDF file
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
Natalya SerayaNatalya Seraya
Natalya Seraya
RBR. A. Bykov
R. A. Bykov
SMS. V. Mamyachenkov
S. V. Mamyachenkov
OAO. S. Anisimova
O. S. Anisimova

18 May 2020 in Metallurgist
Verified
Journal Article
Closed access
PDF file
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
Natalya SerayaNatalya Seraya
Natalya Seraya
VSV. I. Samoilov
V. I. Samoilov
Gulzhan DaumovaGulzhan Daumova
Gulzhan Daumova
EAEldar Azbanbayev
Eldar Azbanbayev

6 January 2025 in Molecules
Verified
Journal Article
Open access
PDF file
BKBakytgul Kussainova
Bakytgul Kussainova
GTGaukhar Tazhkenova
Gaukhar Tazhkenova
IKIvan Kazarinov
Ivan Kazarinov
MBMarina Burashnikova
Marina Burashnikova
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
ABAidana Bazarkhankyzy
Aidana Bazarkhankyzy
The physicochemical and adsorption properties of granular sorbents based on natural bentonite and modified sorbents based on it have been studied. It was found that modification of natural bentonite with iron (III) polyhydroxocations (mod. 1_Fe_5 GA) and aluminum (III) (mod. 1_Al_5 GA) by the “co-precipitation” method leads to a change in their chemical composition, structure, and sorption properties. It is shown that modified sorbents based on natural bentonite are finely porous (nanostructured) objects with a predominance of pores measuring 1.5–8.0 nm, with a specific surface area of 55–65 m2/g. Modification of bentonite with iron (III) and aluminum compounds by the “co-precipitation” method also leads to an increase in the sorption capacity of the obtained sorbents with respect to bichromate and arsenate anions and nickel cations by 5-10 times compared with natural bentonite. The obtained sorption isotherms were classified as Langmuir type isotherms. Kinetic analysis showed that at the initial stage the sorption process is controlled by an external diffusion factor, i.e. refers to the diffusion of sorbent from solution into a liquid film on the surface of the sorbent. Then the sorption process begins to proceed in a mixed diffusion mode, when it limits both the external diffusion factor and the internal diffusion factor (the diffusion of the sorbent to the active centers through the system of pores and capillaries). To determine the contribution of the chemical stage to the rate of adsorption of bichromate and arsenate anions and nickel(II) cations with the studied granular sorbents, kinetic curves were processed using the equations of chemical kinetics (pseudo-second-order model). As a result, it was found that the adsorption of the studied anions by modified sorbents based on natural bentonite is best described by a pseudo-second-order kinetic model. It is shown that the use of natural bentonite for the development of technology for the production of granular sorbents based on it has an undeniable advantage, firstly, in terms of its chemical and structural properties, it is easily and effectively modified, and secondly, having astringent properties, granules are easily made on its basis, which turn into ceramics during high-temperature firing. The result is a granular sorbent with high physical and mechanical properties. Since bentonite is an environmentally friendly product, the technology of recycling spent sorbents is also greatly simplified.

23 April 2026 in Minerals
Verified
Journal Article
Open access
PDF file
Nazym AkhmadiyevaNazym Akhmadiyeva
Nazym Akhmadiyeva
Yerkezhan Baimuratovna AbikakYerkezhan Baimuratovna Abikak
Yerkezhan Baimuratovna Abikak
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
НОНуржан Ержанұлы Оракбай
Нуржан Ержанұлы Оракбай
Rinat Anvarbekovich AbdulvaliyevRinat Anvarbekovich Abdulvaliyev
Rinat Anvarbekovich Abdulvaliyev
VPValeriy Pozmogov
Valeriy Pozmogov
The efficient processing of nepheline ores and red mud requires mineralogical preconditioning strategies that enhance aluminum recovery while controlling the potassium behavior in alkaline systems. In this study, carbonate–hydrothermal activation of a nepheline ore–red mud mixture (1:1 mass ratio) was investigated as a targeted approach for phase redistribution prior to alkaline leaching. Thermochemical activation in NaHCO3 solution at 260 °C resulted in the partial destabilization of primary aluminosilicate phases and the formation of secondary carbonate-bearing and hydroxide phases. Quantitative phase analysis revealed the formation of cancrinite (~19 wt.%) and boehmite (~2.8 wt.%), indicating dissolution–reprecipitation processes accompanied by aluminum redistribution and carbonate incorporation. A two-stage alkaline leaching process with controlled calcium addition was applied to evaluate the effect of phase transformation on the extraction performance. The activated material exhibited enhanced reactivity, resulting in an alumina recovery of 92%–94% and selective potassium removal of 82%–87%. The results demonstrate that carbonate–hydrothermal activation acts as an effective mineralogical preconditioning strategy, transforming structurally stable aluminosilicates into more reactive phases. The proposed approach provides a basis for improving the efficiency and selectivity of integrated alumina recovery from complex aluminosilicate raw materials and industrial waste.

1 January 2023 in ES Materials and Manufacturing
Verified
Journal Article
Closed access
Raigul RamazanovaRaigul Ramazanova
Raigul Ramazanova
NSNatalya Seraya
Natalya Seraya
GDGulzhan Daumova
Gulzhan Daumova
ASAinur Seilkhan
Ainur Seilkhan
ZIZhanat Idrisheva
Zhanat Idrisheva
BSBekzat Saurbayeva
Bekzat Saurbayeva