Humans are moving into urban areas at an accelerated pace. An increasing urban population fuels urban expansion and reduces nearby agricultural lands and natural environments such as forests, swamps, other water-pervious areas. Unsustainable development creates a disproportion between the growth of urban areas and the growth in urban population. The UN SDG indicator 11.3.1 specifically addresses the issue of the measurement of land-use efficiency. While the metric and methodology to estimate the indicator are straightforward, it faces problems of data unavailability and inconsistency. Vietnam has a record of tremendous economic growth that has translated into more urban settlements of size. Consequently, rural population movement into urban areas has led to many urban sustainable planning and development challenges. In the absence of previous work on estimating land-use efficiency in Vietnamese cities, this study makes the first attempt to examine land-use efficiency in Ha Long, one of the country’s fast-growing cities in recent decades. We mapped land use from high-resolution Landsat imagery (30 m) spanning multi-decadal observations from 1986 to 2020. An advanced machine learning approach, the Support Vector Machine algorithm, was applied to estimate the built-up area, which, by integration with census data, is essential for calculating SDG indicator 11.3.1. This study shows that the land-use efficiency metric was positive but small at the beginning of the considered period but increased in 2000–2020. These results suggest that before 2000, the urban land consumption rate in Ha Long was lower than the population growth rate, implying denser urban land use. The situation changed to the opposite when the urban land consumption rate exceeded the population growth rate in the past two decades. The study’s approach is applicable to regional and district levels to provide comparative analyses between cities or parts of a region or districts of the city. These analyses are valuable tools for assessing the impact of local urban and municipal planning policies on urban development.

Synthetic Aperture Radar (SAR) remote sensing data can be used as an effective alternative to detect surface water and provide useful information regarding operational flood monitoring, in particular for the improvement of rapid flood assessments. However, this application frequently requires standard and simple, yet robust, algorithms. Although thresholding approaches meet these requirements, limitations such as data inequality over large spatial regions and challenges in estimating optimal threshold values remain. Here, we propose a new method for SAR water extraction named Hammock Swing Thresholding (HST). We applied this HST approach to four SAR remote sensing datasets, namely, Sentinel-1, ALOS-2, TerraSAR-X, and RadarSAT-2 for flood inundation mapping for a case study focusing on the Tam Nong district in the Vietnam Mekong delta. A 2D calibrated Hydrologic Engineering Centers River Analysis System (HEC-RAS) model was coupled with the HST outputs in order to estimate the optimal thresholds (OTs) where the SAR-based water masks fitted best with HEC-RAS’s inundation patterns. Our results showed that water levels extracted from Sentinel-1 data best agreed with the HEC-RAS water extent (88.3%), following by ALOS-2 (85.9%), TerraSAR-X (77.2%). and RadarSAT-2 (72%) at OTs of −15, 68, 21, and 35 decibel (dB), respectively. Generated flood maps indicated changes in the flood extent of the flooding seasons from 2010 and 2014–2016 with variations in spatial extent appearing greater in the TerraSAR-X and RadarSAT-2 higher resolution maps. We recommend the use of OTs in applications of flood monitoring using SAR remote sensing data, such as for an open data cube (ODC).

This research investigated the performance of four different machine learning supervised image classifiers: artificial neural network (ANN), decision tree (DT), random forest (RF), and support vector machine (SVM) using SPOT-7 and Sentinel-1 images to classify mangrove age and species in 2019 in a Red River estuary, typical of others found in northern Viet Nam. The four classifiers were chosen because they are considered to have high accuracy, however, their use in mangrove age and species classifications has thus far been limited. A time-series of Landsat images from 1975 to 2019 was used to map mangrove extent changes using the unsupervised classification method of iterative self-organizing data analysis technique (ISODATA) and a comparison with accuracy of K-means classification, which found that mangrove extent has increased, despite a fall in the 1980s, indicating the success of mangrove plantation and forest protection efforts by local people in the study area. To evaluate the supervised image classifiers, 183 in situ training plots were assessed, 70% of them were used to train the supervised algorithms, with 30% of them employed to validate the results. In order to improve mangrove species separations, Gram–Schmidt and principal component analysis image fusion techniques were applied to generate better quality images. All supervised and unsupervised (2019) results of mangrove age, species, and extent were mapped and accuracy was evaluated. Confusion matrices were calculated showing that the classified layers agreed with the ground-truth data where most producer and user accuracies were greater than 80%. The overall accuracy and Kappa coefficients (around 0.9) indicated that the image classifications were very good. The test showed that SVM was the most accurate, followed by DT, ANN, and RF in this case study. The changes in mangrove extent identified in this study and the methods tested for using remotely sensed data will be valuable to monitoring and evaluation assessments of mangrove plantation projects.

Coastal zones are critically important ecosystems that are closely tied to human activities, such as tourism, urbanization, transport, and aquaculture. However, managing and monitoring sea water in the coastal areas is often challenging due to the diversity of the pollution sources. Traditional approaches of onsite measurement and surveys have limitations in terms of cost, efficiency and productivity compared with modern remote sensing methods, particularly for larger and longer observations. Optical remote sensing imagery has been proven to be a good data source for water quality assessment in general and for seawater studies in particular with the use of advanced techniques of data processing such as machine learning (ML) algorithms. However, optical remote sensing data also have their own disadvantages as they are much affected by climatic conditions, atmospheric gas and particles as a source of noise in the data. This noise could be reduced, but it is still unavoidable. This study aims to model seawater quality parameters (total suspended solids (TSS), chlorophyll-a (chla), chemical oxygen demand (COD), and dissolved oxygen (DO)) along a 134 km sea coastal area of the Binh Dinh province by applying the current robust machine learning models of decision tree (DT), random forest (RF), gradient boosting regression (GBR), and Ada boost regression (ABR) using Sentinel-2 imagery. To reduce the atmospheric effects, we conducted onsite measurements of sea surface reflectance (SSR) using the German RAMSES-TriOS instrument for calibration of the Sentinel-2 level 2A data before inputting them to the ML models. Our modeling results showed an improvement of the model accuracy using calibrated SSR compared with the original Sentinel-2 level 2A SSR data. The RF predicted the most accurate seawater quality parameters compared with in situ field-measured data (mean R2 = 0.59 using original Sentinel-2 level 2A SSR and R2 = 0.70 using calibrated SSR). The chla was the most precise estimate (R2 = 0.74 when modelled by the RF model) flowing by DO, COD and TSS. In terms of seawater quality estimation, this accuracy is at a good level. The results of the seawater quality distributions were strongly correlated with coastal features where higher values of TSS, chla, COD, and DO are near the river mouths and urban and tourist areas. These spatial water quality data could be extremely helpful for local governments to make decisions when the modelling is continuously conducted (using big data processing), and it is highly recommended for more applications.

Northern Vietnam is a region prone to heavy flash flooding events. These often have devastating effects on the environment, cause economic damage and, in the worst case scenario, cost human lives. As their frequency and severity are likely to increase in the future, procedures have to be established to cope with this threat. As the prediction of potential flash floods represents one crucial element in this circumstance, we will present an approach that combines the two models KINEROS2 and HEC-RAS in order to accurately predict their occurrence. We used a documented event on 23 June 2011 in the Nam Khat and the larger adjacent Nam Kim watershed to calibrate the coupled model approach. Afterward, we evaluated the performance of the coupled models in predicting flow velocity (FV), water levels (WL), discharge (Q) and streamflow power (P) during the 3–5 days following the event, using two different precipitation datasets from the global spectral model (GSM) and the high resolution model (HRM). Our results show that the estimated Q and WL closely matched observed data with a Nash–Sutcliffe simulation efficiency coefficient (NSE) of around 0.93 and a coefficient of determination (R²) at above 0.96. The resulting analyses reveal strong relationships between river geometry and FV, WL and P. Although there were some minor errors in forecast results, the model-predicted Q and WL corresponded well to the gauged data.